Measurement evidence for Whirlpool WRTX3021TW

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Whirlpool WRTX3021TW fit check Check this model against your opening How ExactFit verifies measurements

Whirlpool WRTX3021TW

Top Freezer · Standard-depth
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Incomplete evidence

6exact-model manufacturer values

0verified equivalent/same-chassis values

6secondary-source-only values

4values with unresolved source details

Last reviewed: 2026-09-05. 6 retained source records. 0 unresolved conflicts. Not every fit-critical input is supported.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

ExactFit does not have sufficient evidence for every fit-critical measurement. The fit checker will return Uncertain unless a known measurement already proves that the model does not fit.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	32.5 in	✓ Verified — exact model	Whirlpool® 33-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 21.3 Cu. Ft. White WRTX3021TW \| Whirlpool Whirlpool	Retained specification excerpt: Cabinet Width 32.5 in
Value used by ExactFit 32.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool® 33-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 21.3 Cu. Ft. White WRTX3021TW \| Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Cabinet Width 32.5 in Reviewed: 2026-09-04 Cabinet Width 32.5 in Open original source ↗ Why this value was used Cabinet Width 32.5 in Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	65.31 in	✓ Secondary source only	Whirlpool WRTX3021TW 33" White Top Freezer Refrigerator www.abt.com	Retained specification excerpt: and 31.88 inches in depth including handles. The case height is 65.31 inches and the case depth is 2
Value used by ExactFit 65.31 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRTX3021TW 33" White Top Freezer Refrigerator www.abt.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: and 31.88 inches in depth including handles. The case height is 65.31 inches and the case depth is 2 Reviewed: 2026-09-04 and 31.88 inches in depth including handles. The case height is 65.31 inches and the case depth is 27.81 inches, providing amp Open original source ↗ Why this value was used and 31.88 inches in depth including handles. The case height is 65.31 inches and the case depth is 27.81 inches, providing amp Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	66 in	✓ Verified — exact model	Whirlpool® 33-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 21.3 Cu. Ft. White WRTX3021TW \| Whirlpool Whirlpool	Retained specification excerpt: Height To Top Of Door Hinge 66 in
Value used by ExactFit 66 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool® 33-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 21.3 Cu. Ft. White WRTX3021TW \| Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Height To Top Of Door Hinge 66 in Reviewed: 2026-09-04 Height To Top Of Door Hinge 66 in Open original source ↗ Why this value was used Height To Top Of Door Hinge 66 in Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	27.81 in	✓ Secondary source only	Whirlpool WRTX3021TW 33" White Top Freezer Refrigerator www.abt.com	Retained specification excerpt: handles. The case height is 65.31 inches and the case depth is 27.81 inches, providing ample
Value used by ExactFit 27.81 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRTX3021TW 33" White Top Freezer Refrigerator www.abt.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: handles. The case height is 65.31 inches and the case depth is 27.81 inches, providing ample Reviewed: 2026-09-04 handles. The case height is 65.31 inches and the case depth is 27.81 inches, providing ample Open original source ↗ Why this value was used handles. The case height is 65.31 inches and the case depth is 27.81 inches, providing ample Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	31.875 in	✓ Conflicting sources — resolved	Whirlpool® 33-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 21.3 Cu. Ft. White WRTX3021TW \| Whirlpool Whirlpool	Retained specification excerpt: Depth Closed Excluding Handles 31.875 in; Depth Closed Including Handles 31.875 in; Depth Excluding
Value used by ExactFit 31.875 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool® 33-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 21.3 Cu. Ft. White WRTX3021TW \| Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Closed Excluding Handles 31.875 in; Depth Closed Including Handles 31.875 in; Depth Excluding Reviewed: 2026-09-04 Depth Closed Excluding Handles 31.875 in; Depth Closed Including Handles 31.875 in; Depth Excluding Doors 27.813 in. Open original source ↗ Why this value was used Depth Closed Excluding Handles 31.875 in; Depth Closed Including Handles 31.875 in; Depth Excluding Doors 27.813 in. Other evidence found 31 in — superseded https://appliancedepot.com/products/whirlpool%C2%AE-32-8-inch-wide-top-freezer-refrigerator-with-total-coverage-cooling-21-3-cu-ft-wrtx3021tw; location not retained. Model scope: not separately recorded. Raw value: Top Of Door Trim, 66.063 in ... Ft. Refrigerator Depth (Without Handles). 31" - 31.9". Refrigerator Height . The final reviewed registry supersedes this earlier audit value. Depth Closed Excluding Handles 31.875 in; Depth Closed Including Handles 31.875 in; Depth Excluding Doors 27.813 in. Open alternative source ↗ Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	31.875 in	✓ Verified — exact model	Whirlpool® 33-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 21.3 Cu. Ft. White WRTX3021TW \| Whirlpool Whirlpool	Retained specification excerpt: Depth Closed Including Handles 31.875 in
Value used by ExactFit 31.875 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool® 33-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 21.3 Cu. Ft. White WRTX3021TW \| Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Closed Including Handles 31.875 in Reviewed: 2026-09-04 Depth Closed Including Handles 31.875 in Open original source ↗ Why this value was used Depth Closed Including Handles 31.875 in Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	61.875 in	✓ Conflicting sources — resolved	Whirlpool® 33-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 21.3 Cu. Ft. White WRTX3021TW \| Whirlpool Whirlpool	Retained specification excerpt: Depth with door open 90 degrees: 61.875 in. The displaced 36.438 in value is width with doors open 9
Value used by ExactFit 61.875 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool® 33-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 21.3 Cu. Ft. White WRTX3021TW \| Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth with door open 90 degrees: 61.875 in. The displaced 36.438 in value is width with doors open 9 Reviewed: 2026-09-04 Depth with door open 90 degrees: 61.875 in. The displaced 36.438 in value is width with doors open 90 degrees. Open original source ↗ Why this value was used Depth with door open 90 degrees: 61.875 in. The displaced 36.438 in value is width with doors open 90 degrees. Other evidence found 36.438 in — superseded https://appliancedepot.com/products/whirlpool%C2%AE-32-8-inch-wide-top-freezer-refrigerator-with-total-coverage-cooling-21-3-cu-ft-wrtx3021tw; location not retained. Model scope: not separately recorded. Raw value: WRTX3021TW ® 32.8-inch Wide Top Free White Width Doors Open 90 Degrees, 36.438 in. Height To Top Of Door Trim, 66.063 in ... Ft. Ref. The final reviewed registry supersedes this earlier audit value. Depth with door open 90 degrees: 61.875 in. The displaced 36.438 in value is width with doors open 90 degrees. Open alternative source ↗ Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	Unknown	? Not found · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/kitchen/refrigeration/refrigerators/top-freezer/p.WRTX3021TW.html + local-cache manufacturer-family consensus Whirlpool	Retained specification excerpt: Derived minimum opening width 33.5 in from product width 32.5 in and explicit 0.5 in clearance on ea
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 32.5 + 2 * 0.5 Confidence label: medium. Primary evidence Whirlpool measurement source — https://www.whirlpool.com/kitchen/refrigeration/refrigerators/top-freezer/p.WRTX3021TW.html + local-cache manufacturer-family consensus Whirlpool · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Derived minimum opening width 33.5 in from product width 32.5 in and explicit 0.5 in clearance on ea Reviewed: 2026-09-04 Derived minimum opening width 33.5 in from product width 32.5 in and explicit 0.5 in clearance on each side. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 33.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	67.5 in	✓ Secondary source only · Calculated/inferred	Whirlpool WRTX3021TW Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 67.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence Whirlpool WRTX3021TW Owners Manual assets.skulytics.io · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 Whirlpool opening envelope: max(65.31, 66.0) + 1.5 = 67.5 in. Open original source ↗ Why this value was used Whirlpool opening envelope: max(65.31, 66.0) + 1.5 = 67.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	28.81 in	✓ Secondary source only · Calculated/inferred	Whirlpool WRTX3021TW Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 28.81 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence Whirlpool WRTX3021TW Owners Manual assets.skulytics.io · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 Whirlpool opening envelope: 27.81 + 1.0 = 28.81 in. Open original source ↗ Why this value was used Whirlpool opening envelope: 27.81 + 1.0 = 28.81 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	Unknown	? Not found	Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io	Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-05 Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern. Open original source ↗ Why this value was used The retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	Unknown	? Not found	Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io	Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-05 Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern. Open original source ↗ Why this value was used The retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	1.5 in	✓ Secondary source only	Whirlpool WRTX3021TW Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 1.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRTX3021TW Owners Manual assets.skulytics.io · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. To ensure proper ventilation for your refrigerator, allow 1/2" (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" Open original source ↗ Why this value was used Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. To ensure proper ventilation for your refrigerator, allow 1/2" (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	1 in	✓ Secondary source only	Whirlpool WRTX3021TW Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 1 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRTX3021TW Owners Manual assets.skulytics.io · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator Open original source ↗ Why this value was used Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	Unknown	? Not found · Calculated/inferred	Whirlpool WRT519SZDT Dimension Guide assets.skulytics.io	Page 2
Value used by ExactFit Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: conflict-free 2-inch consensus across Whirlpool top-mount installation platforms Confidence label: medium. Primary evidence Whirlpool WRT519SZDT Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Not established Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Whirlpool top-mount platform requirement: 2" (5.08 cm) minimum on the hinge side; independently confirmed in WRTX3021, WRTX5028, WRTX5328, and WRTX7421 guides. Open original source ↗ Why this value was used A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 2 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	32.5 in	✓ Verified — exact model	Whirlpool® 33-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 21.3 Cu. Ft. White WRTX3021TW \| Whirlpool Whirlpool	Retained specification excerpt: Cabinet Width 32.5 in
Value used by ExactFit 32.5 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool® 33-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 21.3 Cu. Ft. White WRTX3021TW \| Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Cabinet Width 32.5 in Reviewed: 2026-09-04 Cabinet Width 32.5 in Open original source ↗ Why this value was used Cabinet Width 32.5 in Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	Unknown	? Not found · Calculated/inferred	Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io	Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Freestanding Whirlpool-platform family side clearance Confidence label: low. Primary evidence Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-04 Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern. Open original source ↗ Why this value was used A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Conflicting published measurements

Depth with door, without handles

Selected: 31.875 in. Earlier retained values: 31 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Depth Closed Excluding Handles 31.875 in; Depth Closed Including Handles 31.875 in; Depth Excluding Doors 27.813 in.

View source scope, location, and impact on fit

Depth with doors open at 90°

Selected: 61.875 in. Earlier retained values: 36.438 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Depth with door open 90 degrees: 61.875 in. The displaced 36.438 in value is width with doors open 90 degrees.

View source scope, location, and impact on fit

Measurements not established

Minimum cutout width

Not found for safe fit use. Sources retained: https://www.whirlpool.com/kitchen/refrigeration/refrigerators/top-freezer/p.WRTX3021TW.html + local-cache manufacturer-family consensus. Related-model record: WRTX3021TW.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Left-side ventilation clearance

Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: WRTX3021TW.

The retained record does not establish source scope or a resolvable supporting source.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Right-side ventilation clearance

Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: WRTX3021TW.

The retained record does not establish source scope or a resolvable supporting source.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Hinge-side wall clearance

Not found for safe fit use. Sources retained: 105518640.pdf. Related-model record: WRT519SZDT.

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Adjoining-wall clearance (reviewed endpoint)

Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: WRTX3021TW.

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Source documents and pages

Whirlpool® 33-inch Wide Top Freezer Refrigerator with Total Coverage Cooling- 21.3 Cu. Ft. White WRTX3021TW | Whirlpool

Whirlpool · Web source · exact model/source

Model numbers covered: WRTX3021TW. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

6 displayed measurements supported: Overall width; Height with hinge / controlling height; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Cabinet case width.