This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-09-05. 4 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
Measurements and supporting evidence
Measurement
Value used
Evidence status
Primary source
Location
Details
Overall width
24.375 in
✓ Secondary source only
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com
Retained specification excerpt: net Width = 24.375 in | epth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | |
Value used by ExactFit
24.375 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: net Width = 24.375 in | epth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Reviewed: 2026-09-04
net Width = 24.375 in | epth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Cabinet Width | 24.375 in | | Depth Closed Excluding Handles | 28.375 in | | Depth Closed Including Handl
net Width = 24.375 in | epth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Cabinet Width | 24.375 in | | Depth Closed Excluding Handles | 28.375 in | | Depth Closed Including Handl
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com
Retained specification excerpt: Height To Top Of Cabinet = 65.375 in | | | Depth Closed Including Handles | 28.375 in | | Gross Weig
Value used by ExactFit
65.375 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Height To Top Of Cabinet = 65.375 in | | | Depth Closed Including Handles | 28.375 in | | Gross Weig Reviewed: 2026-09-04
Height To Top Of Cabinet = 65.375 in | | | Depth Closed Including Handles | 28.375 in | | Gross Weight | 143.3 lbs | | Height To Top Of Cabinet | 65.375 in | | Height To Top Of Door Hinge | 66.313 in | | Net Weight | 138.9 lbs | [...]
Height To Top Of Cabinet = 65.375 in | | | Depth Closed Including Handles | 28.375 in | | Gross Weight | 143.3 lbs | | Height To Top Of Cabinet | 65.375 in | | Height To Top Of Door Hinge | 66.313 in | | Net Weight | 138.9 lbs | [...]
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com
Retained specification excerpt: Height To Top Of Door Hinge = 66.3125 in | 75 in | | Gross Weight | 143.3 lbs | | Height To Top Of C
Value used by ExactFit
66.3125 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Height To Top Of Door Hinge = 66.3125 in | 75 in | | Gross Weight | 143.3 lbs | | Height To Top Of C Reviewed: 2026-09-04
Height To Top Of Door Hinge = 66.3125 in | 75 in | | Gross Weight | 143.3 lbs | | Height To Top Of Cabinet | 65.375 in | | Height To Top Of Door Hinge | 66.313 in | | Net Weight | 138.9 lbs | [...] 24-inch Wide Small Space Top-Freezer Refrige | independent cached support: appliancehomestore.com, homedepot.com
Height To Top Of Door Hinge = 66.3125 in | 75 in | | Gross Weight | 143.3 lbs | | Height To Top Of Cabinet | 65.375 in | | Height To Top Of Door Hinge | 66.313 in | | Net Weight | 138.9 lbs | [...] 24-inch Wide Small Space Top-Freezer Refrige | independent cached support: appliancehomestore.com, homedepot.com
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com
Retained specification excerpt: Depth Excluding Doors = 24.0 in | 8 in. | | Height | 66.19 in. | | Length | 28.38 in. | | Weight | 1
Value used by ExactFit
24 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Excluding Doors = 24.0 in | 8 in. | | Height | 66.19 in. | | Length | 28.38 in. | | Weight | 1 Reviewed: 2026-09-04
Depth Excluding Doors = 24.0 in | 8 in. | | Height | 66.19 in. | | Length | 28.38 in. | | Weight | 143.3 lbs. | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Cabinet Width | 24.375 in | | De
Depth Excluding Doors = 24.0 in | 8 in. | | Height | 66.19 in. | | Length | 28.38 in. | | Weight | 143.3 lbs. | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Cabinet Width | 24.375 in | | De
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com
Retained specification excerpt: Depth Closed Excluding Handles = 28.375 in | in | | Depth With Door Open 90 Degree | 49 in | | Cabin
Value used by ExactFit
28.375 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Closed Excluding Handles = 28.375 in | in | | Depth With Door Open 90 Degree | 49 in | | Cabin Reviewed: 2026-09-04
Depth Closed Excluding Handles = 28.375 in | in | | Depth With Door Open 90 Degree | 49 in | | Cabinet Width | 24.375 in | | Depth Closed Excluding Handles | 28.375 in | | Depth Closed Including Handles | 28.375 in | | Gross Weight | 143.3 lbs | |
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com
Retained specification excerpt: Depth Closed Including Handles = 28.375 in | | Cabinet Width | 24.375 in | | Depth Closed Excluding
Value used by ExactFit
28.375 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Closed Including Handles = 28.375 in | | Cabinet Width | 24.375 in | | Depth Closed Excluding Reviewed: 2026-09-04
Depth Closed Including Handles = 28.375 in | | Cabinet Width | 24.375 in | | Depth Closed Excluding Handles | 28.375 in | | Depth Closed Including Handles | 28.375 in | | Gross Weight | 143.3 lbs | | Height To Top Of Cabinet | 65.375 in | | Heigh
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com
Retained specification excerpt: 143.3 lbs. | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Cabinet
Value used by ExactFit
49 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: 143.3 lbs. | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Cabinet Reviewed: 2026-09-04
143.3 lbs. | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Cabinet Width | 24.375 in | | Depth Closed Ex
25.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: 24.375 + 2 * 0.5
Confidence label: medium.
Primary evidence
Whirlpool WRT313CZLB Instruction Sheet appliancehomestore.com · Instruction Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-04
Minimum opening derived from exact product width plus explicit symmetric side spacing: 24.375 + 2 * 0.5 = 25.375 in. Side evidence: To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side
Minimum opening derived from exact product width plus explicit symmetric side spacing: 24.375 + 2 * 0.5 = 25.375 in. Side evidence: To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side Calculation or inference: 24.375 + 2 * 0.5.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Whirlpool opening envelope: max(65.375, 66.3125) + 1.5 = 67.8125 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Whirlpool opening envelope: 24.0 + 1.0 = 25.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRT313CZLB Instruction Sheet assets.skulytics.io · Instruction Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05
To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side
To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRT313CZLB Instruction Sheet assets.skulytics.io · Instruction Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05
To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side
To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRT313CZLB Instruction Sheet assets.skulytics.io · Instruction Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05
Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. recommended to allow a 1/2" (1.25 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of
Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. recommended to allow a 1/2" (1.25 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRT313CZLB Instruction Sheet assets.skulytics.io · Instruction Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05
Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case
Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Compact Whirlpool top-mount family: next to a fixed wall, leave 2 1/4" (5.7 cm). Calculation or inference: WRT112/WRT312/WRT313 compact top-mount chassis family.
Why evidence from WRT112CZJB applies
Target model: WRT313CZLB. Supporting model: WRT112CZJB. Manufacturer: Whirlpool. Product family and measurement relationship: WRT112/WRT312/WRT313 compact top-mount chassis family.
Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: Compact Whirlpool top-mount family: next to a fixed wall, leave 2 1/4" (5.7 cm).. Known differences: not separately recorded. Review decision: documented compact chassis propagation; 2026-09-05.
This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence.
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com
Retained specification excerpt: in | | Depth With Door Open 90 Degree | 49 in | | Cabinet Width | 24.375 in | | Depth Closed Excludi
Value used by ExactFit
24.375 in · Fit role: Informational only.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: in | | Depth With Door Open 90 Degree | 49 in | | Cabinet Width | 24.375 in | | Depth Closed Excludi Reviewed: 2026-09-04
in | | Depth With Door Open 90 Degree | 49 in | | Cabinet Width | 24.375 in | | Depth Closed Excluding Handles | 28.375 in |
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRT313CZLB Instruction Sheet assets.skulytics.io · Instruction Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-04
To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side
To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Whirlpool WRT313CZLB Top Freezer Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source · secondary model/source
Model numbers covered: WRT313CZLB. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
8 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.