Measurement evidence for Whirlpool WRT312CZJW

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Whirlpool WRT312CZJW fit check Check this model against your opening How ExactFit verifies measurements

Whirlpool WRT312CZJW

Top Freezer · Counter-depth
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Complete mixed evidence

2exact-model manufacturer values

1verified equivalent/same-chassis values

13secondary-source-only values

0values with unresolved source details

Last reviewed: 2026-09-05. 5 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	24 in	✓ Conflicting sources — resolved	Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 24 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Cabinet width = 24 in. Open original source ↗ Why this value was used Cabinet width = 24 in. Other evidence found 22.625 in — superseded 105518221.pdf; page 2. Model scope: not separately recorded. Raw value: Aligned with case_width_in (22.625"). The final reviewed registry supersedes this earlier audit value. Cabinet width = 24 in. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	60.625 in	✓ Secondary source only	Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 60.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Overall cabinet height including rollers = 60-5/8 in. Open original source ↗ Why this value was used Overall cabinet height including rollers = 60-5/8 in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	61.5625 in	✓ Secondary source only	Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 61.5625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Height overall = 61-9/16 in. Open original source ↗ Why this value was used Height overall = 61-9/16 in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	24 in	✓ Secondary source only	Whirlpool WRT312CZJW 24 Inch Counter-Depth Top ... www.ajmadison.com	Retained specification excerpt: Depth without Door = 24.0 in \| Whirlpool WRT312CZJW 24 Inch Counter-Depth Top ... Depth: 28 3/8 Inch
Value used by ExactFit 24 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRT312CZJW 24 Inch Counter-Depth Top ... www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth without Door = 24.0 in \| Whirlpool WRT312CZJW 24 Inch Counter-Depth Top ... Depth: 28 3/8 Inch Reviewed: 2026-09-04 Depth without Door = 24.0 in \| Whirlpool WRT312CZJW 24 Inch Counter-Depth Top ... Depth: 28 3/8 Inch. Depth without Door: 24 Inch. Depth without Door and Handles: 24 Inch. Depth without Handles: 28 3/8 Inch. Open original source ↗ Why this value was used Depth without Door = 24.0 in \| Whirlpool WRT312CZJW 24 Inch Counter-Depth Top ... Depth: 28 3/8 Inch. Depth without Door: 24 Inch. Depth without Door and Handles: 24 Inch. Depth without Handles: 28 3/8 Inch. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	28.375 in	✓ Secondary source only	Whirlpool WRT312CZJW 24 Inch Counter-Depth Top ... www.ajmadison.com	Retained specification excerpt: Depth without Handles = 28.375 in \| 3/8 Inch. Depth without Door: 24 Inch. Depth without Door and Ha
Value used by ExactFit 28.375 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRT312CZJW 24 Inch Counter-Depth Top ... www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth without Handles = 28.375 in \| 3/8 Inch. Depth without Door: 24 Inch. Depth without Door and Ha Reviewed: 2026-09-04 Depth without Handles = 28.375 in \| 3/8 Inch. Depth without Door: 24 Inch. Depth without Door and Handles: 24 Inch. Depth without Handles: 28 3/8 Inch. Depth with Door at 90°: 49 Inch. Open original source ↗ Why this value was used Depth without Handles = 28.375 in \| 3/8 Inch. Depth without Door: 24 Inch. Depth without Door and Handles: 24 Inch. Depth without Handles: 28 3/8 Inch. Depth with Door at 90°: 49 Inch. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	28.375 in	✓ Secondary source only	Whirlpool WRT312CZJW 24 Inch Counter-Depth Top ... www.ajmadison.com	Retained specification excerpt: Plain exact-model specification row: Depth = 28.375 in \| Whirlpool WRT312CZJW 24 Inch Counter-Depth
Value used by ExactFit 28.375 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRT312CZJW 24 Inch Counter-Depth Top ... www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Plain exact-model specification row: Depth = 28.375 in \| Whirlpool WRT312CZJW 24 Inch Counter-Depth Reviewed: 2026-09-04 Plain exact-model specification row: Depth = 28.375 in \| Whirlpool WRT312CZJW 24 Inch Counter-Depth Top ... Depth: 28 3/8 Inch. Depth without Door: 24 Inch. Depth without Door and Handles: 24 Inch. Depth without Handles: 28 3/8 Inch. Depth with Open original source ↗ Why this value was used Plain exact-model specification row: Depth = 28.375 in \| Whirlpool WRT312CZJW 24 Inch Counter-Depth Top ... Depth: 28 3/8 Inch. Depth without Door: 24 Inch. Depth without Door and Handles: 24 Inch. Depth without Handles: 28 3/8 Inch. Depth with Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	49 in	✓ Secondary source only	Whirlpool WRT312CZJW 24 Inch Counter-Depth Top ... www.ajmadison.com	Retained specification excerpt: Depth with Door at 90° = 49.0 in \| h. Depth without Door and Handles: 24 Inch. Depth without Handles
Value used by ExactFit 49 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRT312CZJW 24 Inch Counter-Depth Top ... www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth with Door at 90° = 49.0 in \| h. Depth without Door and Handles: 24 Inch. Depth without Handles Reviewed: 2026-09-04 Depth with Door at 90° = 49.0 in \| h. Depth without Door and Handles: 24 Inch. Depth without Handles: 28 3/8 Inch. Depth with Door at 90°: 49 Inch. Open original source ↗ Why this value was used Depth with Door at 90° = 49.0 in \| h. Depth without Door and Handles: 24 Inch. Depth without Handles: 28 3/8 Inch. Depth with Door at 90°: 49 Inch. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	25 in	✓ Secondary source only · Calculated/inferred	Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io	Page 2
Value used by ExactFit 25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: 24.0 + 2 * 0.5 Confidence label: medium. Primary evidence Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04 Minimum opening derived from exact product width plus explicit symmetric side spacing: 24.0 + 2 * 0.5 = 25.0 in. Side evidence: Top Mount Refrigerator \| To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead \| cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your \| deterministic pattern: space_each_side Open original source ↗ Why this value was used Minimum opening derived from exact product width plus explicit symmetric side spacing: 24.0 + 2 * 0.5 = 25.0 in. Side evidence: Top Mount Refrigerator \| To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead \| cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your \| deterministic pattern: space_each_side Calculation or inference: 24.0 + 2 * 0.5. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	63.0625 in	✓ Secondary source only · Calculated/inferred	Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io	Page 2
Value used by ExactFit 63.0625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Whirlpool opening envelope: max(60.625, 61.5625) + 1.5 = 63.0625 in. Open original source ↗ Why this value was used Whirlpool opening envelope: max(60.625, 61.5625) + 1.5 = 63.0625 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	25 in	✓ Secondary source only · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202108/dimension-guide-w11440351-reva.pdf Whirlpool	Page 2
Value used by ExactFit 25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202108/dimension-guide-w11440351-reva.pdf Whirlpool · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Minimum opening depth derived from case-only depth 24.0 in plus documented rear clearance 1.0 in. Open original source ↗ Why this value was used Minimum opening depth derived from case-only depth 24.0 in plus documented rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	0.5 in	✓ Verified — exact model · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202108/dimension-guide-w11440351-reva.pdf Whirlpool	Page 2
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRT312CZJ* Confidence label: high. Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202108/dimension-guide-w11440351-reva.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 1/2" space on each side Open original source ↗ Why this value was used 1/2" space on each side Calculation or inference: documented DOE model pattern WRT312CZJ*. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	0.5 in	✓ Verified — exact model · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202108/dimension-guide-w11440351-reva.pdf Whirlpool	Page 2
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRT312CZJ* Confidence label: high. Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202108/dimension-guide-w11440351-reva.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 1/2" space on each side Open original source ↗ Why this value was used 1/2" space on each side Calculation or inference: documented DOE model pattern WRT312CZJ*. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	1.5 in	✓ Secondary source only	Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io	Page 2
Value used by ExactFit 1.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. Top Mount Refrigerator To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your Open original source ↗ Why this value was used Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. Top Mount Refrigerator To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	1 in	✓ Verified — exact model · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202108/dimension-guide-w11440351-reva.pdf Whirlpool	Page 2
Value used by ExactFit 1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRT312CZJ* Confidence label: medium. Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202108/dimension-guide-w11440351-reva.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 1" at the back Open original source ↗ Why this value was used 1" at the back Calculation or inference: documented DOE model pattern WRT312CZJ*. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	2.25 in	✓ Verified — equivalent model · Calculated/inferred	Whirlpool WRT112CZJB Dimension Guide assets.skulytics.io	Page 2
Value used by ExactFit 2.25 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: declared_multi_model_scope Confidence label: medium. Primary evidence Whirlpool WRT112CZJB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 next to a fixed wall, leave 21/4" (5.7 cm Open original source ↗ Why this value was used next to a fixed wall, leave 21/4" (5.7 cm Calculation or inference: cached document family mapping: declared_multi_model_scope. Why evidence from WRT112CZJB applies Target model: WRT312CZJW. Supporting model: WRT112CZJB. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: declared_multi_model_scope. Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: next to a fixed wall, leave 21/4" (5.7 cm. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	24 in	✓ Conflicting sources — resolved	Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 24 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Cabinet width = 24 in. Open original source ↗ Why this value was used Cabinet width = 24 in. Other evidence found 22.625 in — superseded 105518221.pdf; page 2. Model scope: not separately recorded. Raw value: Width 225/8" (575 mm). The final reviewed registry supersedes this earlier audit value. Cabinet width = 24 in. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	0.5 in	✓ Secondary source only	Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io	Page 2
Value used by ExactFit 0.5 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRT312CZJW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04 Top Mount Refrigerator \| To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead \| cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your \| deterministic pattern: space_each_side Open original source ↗ Why this value was used Top Mount Refrigerator \| To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead \| cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your \| deterministic pattern: space_each_side Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Conflicting published measurements

Overall width

Selected: 24 in. Earlier retained values: 22.625 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Cabinet width = 24 in.

View source scope, location, and impact on fit

Cabinet case width

Selected: 24 in. Earlier retained values: 22.625 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Cabinet width = 24 in.

View source scope, location, and impact on fit

Source documents and pages

Whirlpool WRT312CZJW Dimension Guide

assets.skulytics.io · Dimension Guide · secondary model/source

Model numbers covered: WRT312CZJW. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

7 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Minimum cutout height; Top clearance; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).