Measurement evidence for Whirlpool WRT112CZJW

Value used by ExactFit

24 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRT112CZJW Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Cabinet width = 24 in.

Why this value was used

Cabinet width = 24 in.

Other evidence found

• 22.625 in — superseded

  105518078.pdf; page 2. Model scope: not separately recorded. Raw value: Aligned with case_width_in (22.625"). The final reviewed registry supersedes this earlier audit value. Cabinet width = 24 in.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

60.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRT112CZJW Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Overall cabinet height including rollers = 60-5/8 in.

Why this value was used

Overall cabinet height including rollers = 60-5/8 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

61.5625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRT112CZJW Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Height overall = 61-9/16 in.

Why this value was used

Height overall = 61-9/16 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

24-inch Wide Small Space Top-Freezer Refrigerator - 11.6 cu. ft. White WRT112CZJW | Whirlpool
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors: 24.0 in | pth Closed Excluding Handles 28.375 in Depth Closed Including Handl
Reviewed: 2026-09-04

Depth Excluding Doors: 24.0 in | pth Closed Excluding Handles 28.375 in Depth Closed Including Handles 28.375 in Depth Excluding Doors 24 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 3 cu. ft. Gross We

Why this value was used

Depth Excluding Doors: 24.0 in | pth Closed Excluding Handles 28.375 in Depth Closed Including Handles 28.375 in Depth Excluding Doors 24 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 3 cu. ft. Gross We

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.38 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

24-inch Wide Small Space Top-Freezer Refrigerator - 11.6 cu. ft. White WRT112CZJW | Whirlpool
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Excluding Handles: 28.38 in | rm No LCD Touch Screen No Max Cool/Fast Cool Yes ### Dime
Reviewed: 2026-09-04

Depth Closed Excluding Handles: 28.38 in | rm No LCD Touch Screen No Max Cool/Fast Cool Yes ### Dimensions Depth 28.375 in Depth Closed Excluding Handles 28.375 in Depth Closed Including Handles 28.375 in Depth Excluding Doors 24 in Depth With

Why this value was used

Depth Closed Excluding Handles: 28.38 in | rm No LCD Touch Screen No Max Cool/Fast Cool Yes ### Dimensions Depth 28.375 in Depth Closed Excluding Handles 28.375 in Depth Closed Including Handles 28.375 in Depth Excluding Doors 24 in Depth With

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28.38 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

24-inch Wide Small Space Top-Freezer Refrigerator - 11.6 cu. ft. White WRT112CZJW | Whirlpool
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Including Handles: 28.38 in | ool Yes ### Dimensions Depth 28.375 in Depth Closed Exclu
Reviewed: 2026-09-04

Depth Closed Including Handles: 28.38 in | ool Yes ### Dimensions Depth 28.375 in Depth Closed Excluding Handles 28.375 in Depth Closed Including Handles 28.375 in Depth Excluding Doors 24 in Depth With Door Open 90 Degree 49 in Freezer Capaci

Why this value was used

Depth Closed Including Handles: 28.38 in | ool Yes ### Dimensions Depth 28.375 in Depth Closed Excluding Handles 28.375 in Depth Closed Including Handles 28.375 in Depth Excluding Doors 24 in Depth With Door Open 90 Degree 49 in Freezer Capaci

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

24-inch Wide Small Space Top-Freezer Refrigerator - 11.6 cu. ft. White WRT112CZJW | Whirlpool
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors 24 in Depth With Door Open 90: 49.0 in | pth Closed Excluding Handles 28.375 i
Reviewed: 2026-09-04

Depth Excluding Doors 24 in Depth With Door Open 90: 49.0 in | pth Closed Excluding Handles 28.375 in Depth Closed Including Handles 28.375 in Depth Excluding Doors 24 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 3 cu. ft. Gross Weight 140 lbs Height 61.5625 in Height

Why this value was used

Depth Excluding Doors 24 in Depth With Door Open 90: 49.0 in | pth Closed Excluding Handles 28.375 in Depth Closed Including Handles 28.375 in Depth Excluding Doors 24 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 3 cu. ft. Gross Weight 140 lbs Height 61.5625 in Height

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 24.0 + 2 * 0.5

Confidence label: medium.

Primary evidence

Whirlpool WRT112CZJW Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Minimum opening derived from exact product width plus explicit symmetric side spacing: 24.0 + 2 * 0.5 = 25.0 in. Side evidence: Top Mount Refrigerator | To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead | cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your | deterministic pattern: space_each_side

Why this value was used

Minimum opening derived from exact product width plus explicit symmetric side spacing: 24.0 + 2 * 0.5 = 25.0 in. Side evidence: Top Mount Refrigerator | To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead | cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your | deterministic pattern: space_each_side Calculation or inference: 24.0 + 2 * 0.5.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

63.0625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Refrigerator WHIRLPOOL WRT112CZJW - User manual and instructions
www.notice-facile.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 61.5625 in plus documented top cleara
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 61.5625 in plus documented top clearance 1.5 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 61.5625 in plus documented top clearance 1.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202108/dimension-guide-w11440351-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 24.0 in plus documented rear clearance 1.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 24.0 in plus documented rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRT112CZJ***

Confidence label: high.

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202108/dimension-guide-w11440351-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern WRT112CZJ***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRT112CZJ***

Confidence label: high.

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202108/dimension-guide-w11440351-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern WRT112CZJ***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Refrigerator WHIRLPOOL WRT112CZJW - User manual and instructions
www.notice-facile.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Top: 1 1/2 in
Reviewed: 2026-09-05

Top: 1 1/2 in

Why this value was used

Top: 1 1/2 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRT112CZJ***

Confidence label: medium.

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202108/dimension-guide-w11440351-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1" at the back

Why this value was used

1" at the back Calculation or inference: documented DOE model pattern WRT112CZJ***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.25 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: declared_multi_model_scope

Confidence label: medium.

Primary evidence

Whirlpool WRT112CZJB Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

next to a fixed wall, leave 21/4" (5.7 cm

Why this value was used

next to a fixed wall, leave 21/4" (5.7 cm Calculation or inference: cached document family mapping: declared_multi_model_scope.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

24 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRT112CZJW Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Cabinet width = 24 in.

Why this value was used

Cabinet width = 24 in.

Other evidence found

• 22.625 in — superseded

  105518078.pdf; page 2. Model scope: not separately recorded. Raw value: Width 225/8" (575 mm). The final reviewed registry supersedes this earlier audit value. Cabinet width = 24 in.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

0.5 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool WRT112CZJW Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Top Mount Refrigerator | To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead | cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your | deterministic pattern: space_each_side

Why this value was used

Top Mount Refrigerator | To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead | cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser as back in case is present). If your | deterministic pattern: space_each_side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.