Measurement evidence for Whirlpool WRSC5536RW

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Whirlpool WRSC5536RW fit check Check this model against your opening How ExactFit verifies measurements

Whirlpool WRSC5536RW

Side-by-Side · Counter-depth
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Complete mixed evidence

1exact-model manufacturer values

3verified equivalent/same-chassis values

10secondary-source-only values

2values with unresolved source details

Last reviewed: 2026-09-05. 6 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	35.5 in	✓ Secondary source only	Whirlpool WRSC5536RW Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 35.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRSC5536RW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Aligned with case_width_in (35.5") Open original source ↗ Why this value was used Aligned with case_width_in (35.5") Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	69 in	✓ Secondary source only	Whirlpool WRSC5536RW Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 69 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRSC5536RW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Height to top of cabinet 69" (175.26 cm) Open original source ↗ Why this value was used Height to top of cabinet 69" (175.26 cm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	69.25 in	✓ Secondary source only	Whirlpool WRSC5536RW Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 69.25 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRSC5536RW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Overall Height 691/4" (175.9 cm) Open original source ↗ Why this value was used Overall Height 691/4" (175.9 cm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	23.875 in	✓ Conflicting sources — resolved	Whirlpool WRSC5536RW 36 Inch Counter-Depth Side ... - AJ Madison www.ajmadison.com	Retained specification excerpt: exact manufacturer dimension guide overrides retailer or unlabeled overall value
Value used by ExactFit 23.875 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRSC5536RW 36 Inch Counter-Depth Side ... - AJ Madison www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: exact manufacturer dimension guide overrides retailer or unlabeled overall value Reviewed: 2026-09-04 exact manufacturer dimension guide overrides retailer or unlabeled overall value Open original source ↗ Why this value was used exact manufacturer dimension guide overrides retailer or unlabeled overall value Other evidence found 24.5 in — superseded https://www.ajmadison.com/cgi-bin/ajmadison/WRSC5536RW.html; location not retained. Model scope: not separately recorded. Raw value: Depth without Door = 24.5 in \| Whirlpool WRSC5536RW 36 Inch Counter-Depth Side ... - AJ Madison Depth without Door: 24 1/2 Inch. Depth without Handles: 27 1/2 Inch. Depth with Door at 90°: 45 7/8 Inch. Hei. The final reviewed registry supersedes this earlier audit value. exact manufacturer dimension guide overrides retailer or unlabeled overall value Open alternative source ↗ Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	28.375 in	✓ Secondary source only	Whirlpool WRSC5536RW Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 28.375 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRSC5536RW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Depth without handles 283/8" (72.07 cm) Open original source ↗ Why this value was used Depth without handles 283/8" (72.07 cm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	30.375 in	✓ Secondary source only	Whirlpool WRSC5536RW Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 30.375 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRSC5536RW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Depth with handles 303/8" (77.15 cm) Open original source ↗ Why this value was used Depth with handles 303/8" (77.15 cm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	45.75 in	✓ Secondary source only	Whirlpool WRSC5536RW Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 45.75 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRSC5536RW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Depth with door open 90° 453/4" (116.21 cm) Open original source ↗ Why this value was used Depth with door open 90° 453/4" (116.21 cm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	36.5 in	✓ Conflicting sources — resolved	36-inch Counter Depth Side-by-Side Refrigerator with TruCool™ System White WRSC5536RW \| Whirlpool Whirlpool	Retained specification excerpt: Reviewed cached exact-model manufacturer label: Cutout Width = 36.5 in. Context: th 35.5 in Capacity
Value used by ExactFit 36.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence 36-inch Counter Depth Side-by-Side Refrigerator with TruCool™ System White WRSC5536RW \| Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Cutout Width = 36.5 in. Context: th 35.5 in Capacity Reviewed: 2026-09-04 Reviewed cached exact-model manufacturer label: Cutout Width = 36.5 in. Context: th 35.5 in Capacity 20.85 cu. ft. Cutout Depth 30.375 in Cutout Height 70.25 in Cutout Width 36.5 in Depth 29.75 in Depth Closed Excluding Handles 28.375 in Depth Closed Including Open original source ↗ Why this value was used Reviewed cached exact-model manufacturer label: Cutout Width = 36.5 in. Context: th 35.5 in Capacity 20.85 cu. ft. Cutout Depth 30.375 in Cutout Height 70.25 in Cutout Width 36.5 in Depth 29.75 in Depth Closed Excluding Handles 28.375 in Depth Closed Including Other evidence found 36 in — superseded 105533766.pdf; page 5. Model scope: not separately recorded. Raw value: Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm).. The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Cutout Width = 36.5 in. Context: th 35.5 in Capacity 20.85 cu. ft. Cutout Depth 30.375 in Cutout Height 70.25 in Cutout Width 36.5 in Depth 29.75 in Depth Closed Excluding Handles 28.375 in Depth Closed Including Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	70.25 in	✓ Secondary source only	Whirlpool WRSC5536RW Side-by-Side Refrigerators \| South Carolina \| Appliance Home Store Inc appliancehomestore.com	Retained specification excerpt: Cutout Height 70.25 in
Value used by ExactFit 70.25 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRSC5536RW Side-by-Side Refrigerators \| South Carolina \| Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Cutout Height 70.25 in Reviewed: 2026-09-05 Cutout Height 70.25 in Open original source ↗ Why this value was used Cutout Height 70.25 in Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	30.375 in	✓ Secondary source only	Whirlpool WRSC5536RW Side-by-Side Refrigerators \| South Carolina \| Appliance Home Store Inc appliancehomestore.com	Retained specification excerpt: Cutout Depth 30.375 in
Value used by ExactFit 30.375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRSC5536RW Side-by-Side Refrigerators \| South Carolina \| Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Cutout Depth 30.375 in Reviewed: 2026-09-05 Cutout Depth 30.375 in Open original source ↗ Why this value was used Cutout Depth 30.375 in Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	Unknown	? Not found	Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io	Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-05 Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern. Open original source ↗ Why this value was used The retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	Unknown	? Not found	Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io	Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-05 Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern. Open original source ↗ Why this value was used The retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	0.5 in	✓ Verified — equivalent model · Calculated/inferred	KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io	Page 5
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidence KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io · Owner's Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 1.27 cm) of space on each side and at the top Open original source ↗ Why this value was used 1.27 cm) of space on each side and at the top Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from KRSC336RPS applies Target model: WRSC5536RW. Supporting model: KRSC336RPS. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Top clearance. Relevant equivalence evidence: 1.27 cm) of space on each side and at the top. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	1 in	✓ Verified — equivalent model · Calculated/inferred	KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io	Page 5
Value used by ExactFit 1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidence KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io · Owner's Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 2.54 cm) of space behind Open original source ↗ Why this value was used 2.54 cm) of space behind Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from KRSC336RPS applies Target model: WRSC5536RW. Supporting model: KRSC336RPS. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Rear clearance. Relevant equivalence evidence: 2.54 cm) of space behind. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	2 in	✓ Verified — equivalent model · Calculated/inferred	KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io	Page 5
Value used by ExactFit 2 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidence KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io · Owner's Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 next to a fixed wall, leave a 2" (5.08 cm Open original source ↗ Why this value was used next to a fixed wall, leave a 2" (5.08 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from KRSC336RPS applies Target model: WRSC5536RW. Supporting model: KRSC336RPS. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: next to a fixed wall, leave a 2" (5.08 cm. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	35.5 in	✓ Secondary source only	Whirlpool WRSC5536RW Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 35.5 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRSC5536RW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Width of cabinet 351/2" (90.17 cm) Open original source ↗ Why this value was used Width of cabinet 351/2" (90.17 cm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	Unknown	? Not found · Calculated/inferred	Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io	Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Freestanding Whirlpool-platform family side clearance Confidence label: low. Primary evidence Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-04 Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern. Open original source ↗ Why this value was used A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Conflicting published measurements

Depth without door

Selected: 23.875 in. Earlier retained values: 24.5 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

exact manufacturer dimension guide overrides retailer or unlabeled overall value

View source scope, location, and impact on fit

Minimum cutout width

Selected: 36.5 in. Earlier retained values: 36 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Reviewed cached exact-model manufacturer label: Cutout Width = 36.5 in. Context: th 35.5 in Capacity 20.85 cu. ft. Cutout Depth 30.375 in Cutout Height 70.25 in Cutout Width 36.5 in Depth 29.75 in Depth Closed Excluding Handles 28.375 in Depth Closed Including

View source scope, location, and impact on fit

Measurements not established

Left-side ventilation clearance

Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: WRSC5536RW.

The retained record does not establish source scope or a resolvable supporting source.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Right-side ventilation clearance

Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: WRSC5536RW.

The retained record does not establish source scope or a resolvable supporting source.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Adjoining-wall clearance (reviewed endpoint)

Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: WRSC5536RW.

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Source documents and pages

Whirlpool WRSC5536RW Dimension Guide

assets.skulytics.io · Dimension Guide · secondary model/source

Model numbers covered: WRSC5536RW. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

7 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Cabinet case width.