This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-09-05. 6 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRSC5536RB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRSC5536RB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRSC5536RB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
36-inch Counter Depth Side-by-Side Refrigerator with TruCool™ System Fingerprint-Resistant Stainless Finish WRSC5536RZ | Whirlpool Whirlpool
Retained specification excerpt: Sibling-chassis propagation from WRSC5536RZ; model codes have the same numeric skeleton, at least fo
Value used by ExactFit
Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: same-chassis variant propagation from WRSC5536RZ
Confidence label: high.
Primary evidence
36-inch Counter Depth Side-by-Side Refrigerator with TruCool™ System Fingerprint-Resistant Stainless Finish WRSC5536RZ | Whirlpool Whirlpool · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Sibling-chassis propagation from WRSC5536RZ; model codes have the same numeric skeleton, at least fo Reviewed: 2026-09-04
Sibling-chassis propagation from WRSC5536RZ; model codes have the same numeric skeleton, at least four existing chassis dimensions match, and no structural dimensions conflict. Sibling evidence: Depth Excluding Doors: 23.88 in | pth Closed Excluding Handles 28.375 in Depth Closed Including Handles 30.375 in Depth Excluding Doors 23.875 in Depth With Door Open 90 Degree 45.75 in Freezer Capacity Volume 7.19 cu. ft. Gr
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
Retained research value: 23.88 in. It is preserved for audit but not accepted as a safe fit input.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRSC5536RB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRSC5536RB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRSC5536RB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
36-inch Counter Depth Side-by-Side Refrigerator with TruCool™ System Black WRSC5536RB | Whirlpool Whirlpool
Retained specification excerpt: Cutout Width: 36.5 in | n, 35.5 in Capacity 20.85 cu. ft. Cutout Depth 30.375 in Cutout Height 70.25
Value used by ExactFit
36.5 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
36-inch Counter Depth Side-by-Side Refrigerator with TruCool™ System Black WRSC5536RB | Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Cutout Width: 36.5 in | n, 35.5 in Capacity 20.85 cu. ft. Cutout Depth 30.375 in Cutout Height 70.25 Reviewed: 2026-09-04
Cutout Width: 36.5 in | n, 35.5 in Capacity 20.85 cu. ft. Cutout Depth 30.375 in Cutout Height 70.25 in Cutout Width 36.5 in Depth 29.75 in Depth Closed Excluding Handles 28.375 in, 27.5 in Depth Closed I
Cutout Width: 36.5 in | n, 35.5 in Capacity 20.85 cu. ft. Cutout Depth 30.375 in Cutout Height 70.25 in Cutout Width 36.5 in Depth 29.75 in Depth Closed Excluding Handles 28.375 in, 27.5 in Depth Closed I
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
WRSC5536RB Whirlpool Side by Side Refrigerator 36 inch 21 cu. ft. Canada - Sale! Best Price, Reviews and Specs www.canadianappliance.ca · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Cutout Height 70 1/4 inches Reviewed: 2026-09-05
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
WRSC5536RB Whirlpool Side by Side Refrigerator 36 inch 21 cu. ft. Canada - Sale! Best Price, Reviews and Specs www.canadianappliance.ca · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Cutout Depth 30 3/8 inches Reviewed: 2026-09-05
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Whirlpool measurement source — local-cache manufacturer-family consensus Publisher not recorded
Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p
Value used by ExactFit
Unknown · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool measurement source — local-cache manufacturer-family consensus Publisher not recorded · Retained document Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p Reviewed: 2026-09-05
Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern.
The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.
Why this value was used
The retained record does not establish source scope or a resolvable supporting source.
Retained research value: 0.188 in. It is preserved for audit but not accepted as a safe fit input.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Whirlpool measurement source — local-cache manufacturer-family consensus Publisher not recorded
Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p
Value used by ExactFit
Unknown · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool measurement source — local-cache manufacturer-family consensus Publisher not recorded · Retained document Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p Reviewed: 2026-09-05
Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern.
The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.
Why this value was used
The retained record does not establish source scope or a resolvable supporting source.
Retained research value: 0.188 in. It is preserved for audit but not accepted as a safe fit input.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document
Confidence label: medium.
Primary evidence
KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io · Owner's Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05
1.27 cm) of space on each side and at the top Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.
Why evidence from KRSC336RPS applies
Target model: WRSC5536RB. Supporting model: KRSC336RPS. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document.
Measurement transferred: Top clearance. Relevant equivalence evidence: 1.27 cm) of space on each side and at the top. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05.
This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence.
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document
Confidence label: medium.
Primary evidence
KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io · Owner's Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05
2.54 cm) of space behind Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.
Why evidence from KRSC336RPS applies
Target model: WRSC5536RB. Supporting model: KRSC336RPS. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document.
Measurement transferred: Rear clearance. Relevant equivalence evidence: 2.54 cm) of space behind. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05.
This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence.
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
2 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document
Confidence label: medium.
Primary evidence
KitchenAid KRSC336RPS Owner's Manual assets.skulytics.io · Owner's Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05
next to a fixed wall, leave a 2" (5.08 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.
Why evidence from KRSC336RPS applies
Target model: WRSC5536RB. Supporting model: KRSC336RPS. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document.
Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: next to a fixed wall, leave a 2" (5.08 cm. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05.
This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRSC5536RB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Whirlpool measurement source — local-cache manufacturer-family consensus Publisher not recorded
Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p
Value used by ExactFit
Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Tall built-in family side clearance
Confidence label: low.
Primary evidence
Whirlpool measurement source — local-cache manufacturer-family consensus Publisher not recorded · Retained document Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p Reviewed: 2026-09-04
Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern.
The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.
Why this value was used
A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.
Retained research value: 0.1875 in. It is preserved for audit but not accepted as a safe fit input.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Not found for safe fit use. Sources retained: https://www.whirlpool.com/kitchen/refrigeration/refrigerators/side-by-side/p.36-inch-counter-depth-side-by-side-refrigerator-with-trucool-system.wrsc5536rz.html. Related-model record: WRSC5536RB.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Left-side ventilation clearance
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
The retained record does not establish source scope or a resolvable supporting source.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Right-side ventilation clearance
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
The retained record does not establish source scope or a resolvable supporting source.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Adjoining-wall clearance (reviewed endpoint)
Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. No rejected related-model candidate is identified in the retained record.
A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.
Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.
Model numbers covered: WRSC5536RB. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
7 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.