This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Side-by-Side · Standard-depth
Market status: Active (recorded 2026-08-17)
Last reviewed: 2026-09-05. 4 retained source records. 0 unresolved conflicts. Not every fit-critical input is supported.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
ExactFit does not have sufficient evidence for every fit-critical measurement. The fit checker will return Uncertain unless a known measurement already proves that the model does not fit.
| Measurement | Value used | Evidence status | Primary source | Location | Details |
|---|---|---|---|---|---|
| Overall width | 32.75 in | ✓ Secondary source only | Whirlpool WRS331SDHB Dimension Guide assets.skulytics.io | Page 2 | |
Value used by ExactFit32.75 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRS331SDHB Dimension Guide Cabinet Width E: 32 3/4" (84.12 cm)Open original source ↗ Why this value was usedCabinet Width E: 32 3/4" (84.12 cm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Cabinet height | 65.625 in | ✓ Secondary source only | Whirlpool WRS331SDHB Dimension Guide assets.skulytics.io | Page 2 | |
Value used by ExactFit65.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRS331SDHB Dimension Guide Height to Top of Cabinet C: 65 5/8" (166.69 cm)Open original source ↗ Why this value was usedHeight to Top of Cabinet C: 65 5/8" (166.69 cm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Height with hinge / controlling height | 66.625 in | ✓ Secondary source only | Whirlpool WRS331SDHB Dimension Guide assets.skulytics.io | Page 2 | |
Value used by ExactFit66.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRS331SDHB Dimension Guide Overall Height D: 66 5/8" (169.23 cm)Open original source ↗ Why this value was usedOverall Height D: 66 5/8" (169.23 cm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth without door | Unknown | ? Not found · Calculated/inferred | 33-inch Wide Side-by-Side Refrigerator - 21 cu. ft. Fingerprint-Resistant Stainless Finish WRS331SDHM | Whirlpool Whirlpool | Retained specification excerpt: Sibling-chassis propagation from WRS331SDHM, WRS331SDHW; model codes have the same numeric skeleton, | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: same-chassis variant propagation from WRS331SDHM, WRS331SDHW Confidence label: high. Primary evidence33-inch Wide Side-by-Side Refrigerator - 21 cu. ft. Fingerprint-Resistant Stainless Finish WRS331SDHM | Whirlpool Sibling-chassis propagation from WRS331SDHM, WRS331SDHW; model codes have the same numeric skeleton, at least four existing chassis dimensions match, and no structural dimensions conflict. Sibling evidence: Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 33.625 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.313 in Freezer Capacity Volume 6.77 cu. ft. GOpen original source ↗ Why this value was usedThe stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 28 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth with door, without handles | 31.625 in | ✓ Secondary source only | Whirlpool WRS331SDHB Dimension Guide assets.skulytics.io | Page 2 | |
Value used by ExactFit31.625 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRS331SDHB Dimension Guide Depth Without Handles A: 31 5/8" (80.33 cm)Open original source ↗ Why this value was usedDepth Without Handles A: 31 5/8" (80.33 cm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with handle | 33.625 in | ✓ Secondary source only | Whirlpool WRS331SDHB Dimension Guide assets.skulytics.io | Page 2 | |
Value used by ExactFit33.625 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRS331SDHB Dimension Guide Depth With Handles B: 33 5/8" (85.41 cm)Open original source ↗ Why this value was usedDepth With Handles B: 33 5/8" (85.41 cm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with doors open at 90° | 49.3125 in | ✓ Secondary source only | Whirlpool WRS331SDHB Dimension Guide assets.skulytics.io | Page 2 | |
Value used by ExactFit49.3125 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRS331SDHB Dimension Guide Depth with Doors Open 90° F: 49 5/16" (125.25 cm)Open original source ↗ Why this value was usedDepth with Doors Open 90° F: 49 5/16" (125.25 cm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Minimum cutout width | 36 in | ✓ Secondary source only | Whirlpool WRS331SDHB Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit36 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRS331SDHB Dimension Guide Normal minimum cabinet cutout width: 36" (91.44 cm)Open original source ↗ Why this value was usedNormal minimum cabinet cutout width: 36" (91.44 cm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout height | 67.125 in | ✓ Secondary source only · Calculated/inferred | Whirlpool WRS331SDHB Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit67.125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidenceWhirlpool WRS331SDHB Dimension Guide Minimum opening height derived from highest stored appliance endpoint 66.625 in plus documented top clearance 0.5 in.Open original source ↗ Why this value was usedMinimum opening height derived from highest stored appliance endpoint 66.625 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout depth | Unknown | ? Not found · Calculated/inferred | PRODUCT MODEL NUMBERS Side by Side Refrigerator Electrical: A 115-volt, 60-Hz, Whirlpool | Page 1 | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidencePRODUCT MODEL NUMBERS Side by Side Refrigerator Electrical: A 115-volt, 60-Hz, Minimum opening depth derived from case-only depth 28.0 in plus documented rear clearance 1.0 in.Open original source ↗ Why this value was usedA required calculation input lacks defensible evidence. Retained research value: 29 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Left-side ventilation clearance | 0.5 in | ✓ Secondary source only | Whirlpool WRS331SDHB Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit0.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRS331SDHB Dimension Guide Allow 1/2 in. of space on each side and at the top.Open original source ↗ Why this value was usedAllow 1/2 in. of space on each side and at the top. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Right-side ventilation clearance | 0.5 in | ✓ Secondary source only | Whirlpool WRS331SDHB Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit0.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRS331SDHB Dimension Guide Allow 1/2 in. of space on each side and at the top.Open original source ↗ Why this value was usedAllow 1/2 in. of space on each side and at the top. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Top clearance | 0.5 in | ✓ Secondary source only | Whirlpool WRS331SDHB Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit0.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRS331SDHB Dimension Guide Allow 1/2 in. of space on each side and at the top.Open original source ↗ Why this value was usedAllow 1/2 in. of space on each side and at the top. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Rear clearance | Unknown | ? Not found · Calculated/inferred | PRODUCT MODEL NUMBERS Side by Side Refrigerator Electrical: A 115-volt, 60-Hz, Whirlpool | Page 1 | |
Value used by ExactFitUnknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: identical 8-dimension chassis signature; propagated from WRS311SDHB Confidence label: medium. Primary evidencePRODUCT MODEL NUMBERS Side by Side Refrigerator Electrical: A 115-volt, 60-Hz, Conflict-free identical-chassis propagation from Whirlpool WRS311SDHB: rear_clearance_in=1.0 in.Open original source ↗ Why this value was usedThe stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 1 in. It is preserved for audit but not accepted as a safe fit input. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Hinge-side wall clearance | 2 in | ✓ Verified — equivalent model · Calculated/inferred | Amana ASI2175GRB Owners Manual assets.skulytics.io | Page 7 | |
Value used by ExactFit2 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: high. Primary evidenceAmana ASI2175GRB Owners Manual next to a fixed wall, leave a 2" (5.08 cmOpen original source ↗ Why this value was usednext to a fixed wall, leave a 2" (5.08 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from ASI2175GRB appliesTarget model: WRS331SDHB. Supporting model: ASI2175GRB. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: next to a fixed wall, leave a 2" (5.08 cm. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Cabinet case width | 32.75 in | ✓ Secondary source only | Whirlpool WRS331SDHB Dimension Guide assets.skulytics.io | Page 2 | |
Value used by ExactFit32.75 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRS331SDHB Dimension Guide Cabinet Width E: 32 3/4" (84.12 cm)Open original source ↗ Why this value was usedCabinet Width E: 32 3/4" (84.12 cm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Adjoining-wall clearance (reviewed endpoint) | 0.5 in | ✓ Conflicting sources — resolved | Whirlpool WRS331SDHB Dimension Guide assets.skulytics.io | Page 1 | |
Value used by ExactFit0.5 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceWhirlpool WRS331SDHB Dimension Guide Allow 1/2 in. of space on each side and at the top.Open original source ↗ Why this value was usedAllow 1/2 in. of space on each side and at the top. Other evidence found
Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
Selected: 0.5 in. Earlier retained values: 2 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Allow 1/2 in. of space on each side and at the top.
View source scope, location, and impact on fitNot found for safe fit use. Sources retained: https://www.whirlpool.com/kitchen/refrigeration/refrigerators/side-by-side/p.33-inch-wide-side-by-side-refrigerator-21-cu.-ft.wrs331sdhm.html. Related-model record: WRS331SDHB.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: https://www.whirlpool.com/content/dam/global/documents/201710/DimensionGuide-W11105301-D-WH.pdf. Related-model record: WRS331SDHB.
A required calculation input lacks defensible evidence.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
Not found for safe fit use. Sources retained: https://www.whirlpool.com/content/dam/global/documents/201710/DimensionGuide-W11105301-D-WH.pdf. Related-model record: WRS331SDHB.
The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.
An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.
assets.skulytics.io · Dimension Guide · secondary model/source
Model numbers covered: WRS331SDHB. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
13 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Minimum cutout width; Minimum cutout height; Left-side ventilation clearance; Right-side ventilation clearance; Top clearance; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Whirlpool · Web source · Scope not established
Model numbers covered: WRS331SDHB. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
1 displayed measurements supported: Depth without door.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Whirlpool · Web source · Scope not established
Model numbers covered: WRS331SDHB. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
2 displayed measurements supported: Minimum cutout depth; Rear clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · Owners Manual · equivalent model/source
Model numbers covered: ASI2175GRB. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
1 displayed measurements supported: Hinge-side wall clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.