This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-09-05. 4 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRS315SNHB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRS315SNHB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
36-inch Wide Side-by-Side Refrigerator - 25 cu. ft. Black WRS315SNHB | Whirlpool Whirlpool
Retained specification excerpt: Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 69.25 in. Context: oss
Value used by ExactFit
69.25 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
36-inch Wide Side-by-Side Refrigerator - 25 cu. ft. Black WRS315SNHB | Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 69.25 in. Context: oss Reviewed: 2026-09-04
Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 69.25 in. Context: oss Weight 231 lbs, 229 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 226 lbs, 224 lbs Refrigerator Capacity Volume 15.46 Total Refrigerat
Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 69.25 in. Context: oss Weight 231 lbs, 229 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 226 lbs, 224 lbs Refrigerator Capacity Volume 15.46 Total Refrigerat
Other evidence found
69.625 in — superseded
105518380.pdf; page 2. Model scope: not separately recorded. Raw value: Overall Height D: 69 5/8" (176.85 cm). The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 69.25 in. Context: oss Weight 231 lbs, 229 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 226 lbs, 224 lbs Refrigerator Capacity Volume 15.46 Total Refrigerat
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
36-inch Wide Side-by-Side Refrigerator - 25 cu. ft. Black WRS315SNHB | Whirlpool Whirlpool
Retained specification excerpt: Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handl
Value used by ExactFit
28 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
36-inch Wide Side-by-Side Refrigerator - 25 cu. ft. Black WRS315SNHB | Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handl Reviewed: 2026-09-04
Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 33.625 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.313 in Freezer Capacity Volume 9.61 cu. ft. G
Depth Excluding Doors: 28.0 in | pth Closed Excluding Handles 31.625 in Depth Closed Including Handles 33.625 in Depth Excluding Doors 28 in Depth With Door Open 90 Degree 49.313 in Freezer Capacity Volume 9.61 cu. ft. G
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRS315SNHB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRS315SNHB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRS315SNHB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRS315SNHB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Normal minimum cabinet cutout width: 36" (91.44 cm)
Normal minimum cabinet cutout width: 36" (91.44 cm)
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
PRODUCT MODEL NUMBERS Side by Side Refrigerator Electrical: A 115-volt, 60-Hz, Whirlpool · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05
Minimum opening height derived from highest stored appliance endpoint 69.25 in plus documented top clearance 0.5 in.
Minimum opening height derived from highest stored appliance endpoint 69.25 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
PRODUCT MODEL NUMBERS Side by Side Refrigerator Electrical: A 115-volt, 60-Hz, Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05
Minimum opening depth derived from case-only depth 28.0 in plus documented rear clearance 1.0 in.
Minimum opening depth derived from case-only depth 28.0 in plus documented rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
PRODUCT MODEL NUMBERS Side by Side Refrigerator Electrical: A 115-volt, 60-Hz, Whirlpool
Page 1
Value used by ExactFit
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRS315SN****
Confidence label: high.
Primary evidence
PRODUCT MODEL NUMBERS Side by Side Refrigerator Electrical: A 115-volt, 60-Hz, Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05
1/2" of space on each side Calculation or inference: documented DOE model pattern WRS315SN****.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
PRODUCT MODEL NUMBERS Side by Side Refrigerator Electrical: A 115-volt, 60-Hz, Whirlpool
Page 1
Value used by ExactFit
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRS315SN****
Confidence label: high.
Primary evidence
PRODUCT MODEL NUMBERS Side by Side Refrigerator Electrical: A 115-volt, 60-Hz, Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05
1/2" of space on each side Calculation or inference: documented DOE model pattern WRS315SN****.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
PRODUCT MODEL NUMBERS Side by Side Refrigerator Electrical: A 115-volt, 60-Hz, Whirlpool
Page 1
Value used by ExactFit
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRS315SN****
Confidence label: high.
Primary evidence
PRODUCT MODEL NUMBERS Side by Side Refrigerator Electrical: A 115-volt, 60-Hz, Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05
1/2" of space on each side and at the top Calculation or inference: documented DOE model pattern WRS315SN****.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
PRODUCT MODEL NUMBERS Side by Side Refrigerator Electrical: A 115-volt, 60-Hz, Whirlpool
Page 1
Value used by ExactFit
1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRS315SN****
Confidence label: medium.
Primary evidence
PRODUCT MODEL NUMBERS Side by Side Refrigerator Electrical: A 115-volt, 60-Hz, Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05
1" of space behind Calculation or inference: documented DOE model pattern WRS315SN****.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
2 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document
Confidence label: high.
Primary evidence
Amana ASI2175GRB Owners Manual assets.skulytics.io · Owners Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-05
next to a fixed wall, leave a 2" (5.08 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.
Why evidence from ASI2175GRB applies
Target model: WRS315SNHB. Supporting model: ASI2175GRB. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document.
Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: next to a fixed wall, leave a 2" (5.08 cm. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05.
This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRS315SNHB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRS315SNHB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Allow 1/2 in. of space on each side and at the top.
Allow 1/2 in. of space on each side and at the top.
Other evidence found
2 in — superseded
; page 1. Model scope: not separately recorded. Raw value: Leave 2" (5.08 cm) minimum space on each side. The final reviewed registry supersedes this earlier audit value. Allow 1/2 in. of space on each side and at the top.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Selected: 69.25 in. Earlier retained values: 69.625 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 69.25 in. Context: oss Weight 231 lbs, 229 lbs Height 69.625 in Height To Top Of Cabinet 68.625 in Height To Top Of Door Hinge 69.25 in Net Weight 226 lbs, 224 lbs Refrigerator Capacity Volume 15.46 Total Refrigerat
Model numbers covered: WRS315SNHB. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
8 displayed measurements supported: Overall width; Cabinet height; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Minimum cutout width; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).
Availability: retained review record; original URL retained (current availability not rechecked).
Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.