Measurement evidence for Whirlpool WRMF3636RV

Value used by ExactFit

35.94 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide French Door Bottom Mount Refrigerator - 25 cu. ft. Print Resist Blk Stnlss WRMF3636RV | Whirlpool
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: net Width = 35.94 in. Context: Qualified ENERGY STAR
Reviewed: 2026-09-04

Reviewed cached exact-model manufacturer label: net Width = 35.94 in. Context: Qualified ENERGY STAR® Qualified Star K Certified Yes UL Yes ### Dimensions Cabinet Width 35.938 in Capacity 24.5 cu. ft. Common Size 36 in Cutout Height 70.188 in Cutout Width 36

Why this value was used

Reviewed cached exact-model manufacturer label: net Width = 35.94 in. Context: Qualified ENERGY STAR® Qualified Star K Certified Yes UL Yes ### Dimensions Cabinet Width 35.938 in Capacity 24.5 cu. ft. Common Size 36 in Cutout Height 70.188 in Cutout Width 36

Other evidence found

• 35.6299 in — superseded

  105533467.pdf; page 1. Model scope: not separately recorded. Raw value: Table Width Cabinet H: 35.6299". The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: net Width = 35.94 in. Context: Qualified ENERGY STAR® Qualified Star K Certified Yes UL Yes ### Dimensions Cabinet Width 35.938 in Capacity 24.5 cu. ft. Common Size 36 in Cutout Height 70.188 in Cutout Width 36

• 35.625 in — superseded

  105533467.pdf; page 1. Model scope: not separately recorded. Raw value: Width - Cabinet = 35-5/8 in.. The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: net Width = 35.94 in. Context: Qualified ENERGY STAR® Qualified Star K Certified Yes UL Yes ### Dimensions Cabinet Width 35.938 in Capacity 24.5 cu. ft. Common Size 36 in Cutout Height 70.188 in Cutout Width 36

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide French Door Bottom Mount Refrigerator - 25 cu. ft. Print Resist Blk Stnlss WRMF3636RV | Whirlpool
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Height To Top Of Cabinet = 69.0 in. Context: in Fre
Reviewed: 2026-09-04

Reviewed cached exact-model manufacturer label: Height To Top Of Cabinet = 69.0 in. Context: in Freezer Capacity Volume 9.01 cu. ft. Gross Weight 344 lbs Height 70.0625 in Height To Top Of Cabinet 69 in Height To Top Of Door Hinge 70.063 in Maximum Height 70.0625 in Minimum Height

Why this value was used

Reviewed cached exact-model manufacturer label: Height To Top Of Cabinet = 69.0 in. Context: in Freezer Capacity Volume 9.01 cu. ft. Gross Weight 344 lbs Height 70.0625 in Height To Top Of Cabinet 69 in Height To Top Of Door Hinge 70.063 in Maximum Height 70.0625 in Minimum Height

Other evidence found

• 68.622 in — superseded

  105533467.pdf; page 1. Model scope: not separately recorded. Raw value: Table Top of Cabinet B: 174.3 cm (68.622"). The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Height To Top Of Cabinet = 69.0 in. Context: in Freezer Capacity Volume 9.01 cu. ft. Gross Weight 344 lbs Height 70.0625 in Height To Top Of Cabinet 69 in Height To Top Of Door Hinge 70.063 in Maximum Height 70.0625 in Minimum Height

• 68.625 in — superseded

  105533467.pdf; page 1. Model scope: not separately recorded. Raw value: Height - Top of Cabinet = 68-5/8 in.. The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Height To Top Of Cabinet = 69.0 in. Context: in Freezer Capacity Volume 9.01 cu. ft. Gross Weight 344 lbs Height 70.0625 in Height To Top Of Cabinet 69 in Height To Top Of Door Hinge 70.063 in Maximum Height 70.0625 in Minimum Height

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRMF3636RV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Height - Overall = 70-1/8 in.

Why this value was used

Height - Overall = 70-1/8 in.

Other evidence found

• 70.1181 in — superseded

  105533467.pdf; page 1. Model scope: not separately recorded. Raw value: Table Overall Height A: 178.1 cm (70.1181"). The final reviewed registry supersedes this earlier audit value. Height - Overall = 70-1/8 in.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.88 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide French Door Bottom Mount Refrigerator - 25 cu. ft. Print Resist Blk Stnlss WRMF3636RV | Whirlpool
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Depth Excluding Doors = 29.88 in. Context: epth Clos
Reviewed: 2026-09-04

Reviewed cached exact-model manufacturer label: Depth Excluding Doors = 29.88 in. Context: epth Closed Excluding Handles 34.75 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 9.01 cu. ft. Gross

Why this value was used

Reviewed cached exact-model manufacturer label: Depth Excluding Doors = 29.88 in. Context: epth Closed Excluding Handles 34.75 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 9.01 cu. ft. Gross

Other evidence found

• 28.9764 in — superseded

  105533467.pdf; page 1. Model scope: not separately recorded. Raw value: Table Depth Cabinet Only G: 28.9764". The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Depth Excluding Doors = 29.88 in. Context: epth Closed Excluding Handles 34.75 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 9.01 cu. ft. Gross

• 29 in — superseded

  105533467.pdf; page 1. Model scope: not separately recorded. Raw value: Depth - Cabinet Only = 29 in.. The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Depth Excluding Doors = 29.88 in. Context: epth Closed Excluding Handles 34.75 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Freezer Capacity Volume 9.01 cu. ft. Gross

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

34.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide French Door Bottom Mount Refrigerator - 25 cu. ft. Print Resist Blk Stnlss WRMF3636RV | Whirlpool
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 34.75 in. Context:
Reviewed: 2026-09-04

Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 34.75 in. Context: mmon Size 36 in Cutout Height 70.188 in Cutout Width 36.188 in Depth 36.8125 in Depth Closed Excluding Handles 34.75 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth

Why this value was used

Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 34.75 in. Context: mmon Size 36 in Cutout Height 70.188 in Cutout Width 36.188 in Depth 36.8125 in Depth Closed Excluding Handles 34.75 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth

Other evidence found

• 32.126 in — superseded

  105533467.pdf; page 1. Model scope: not separately recorded. Raw value: Table Depth Without Handles F: 32.126". The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 34.75 in. Context: mmon Size 36 in Cutout Height 70.188 in Cutout Width 36.188 in Depth 36.8125 in Depth Closed Excluding Handles 34.75 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth

• 32.125 in — superseded

  105533467.pdf; page 1. Model scope: not separately recorded. Raw value: Depth - Without Handles = 32-1/8 in.. The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 34.75 in. Context: mmon Size 36 in Cutout Height 70.188 in Cutout Width 36.188 in Depth 36.8125 in Depth Closed Excluding Handles 34.75 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.81 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide French Door Bottom Mount Refrigerator - 25 cu. ft. Print Resist Blk Stnlss WRMF3636RV | Whirlpool
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 36.81 in. Context:
Reviewed: 2026-09-04

Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 36.81 in. Context: Cutout Width 36.188 in Depth 36.8125 in Depth Closed Excluding Handles 34.75 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Freezer Ca

Why this value was used

Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 36.81 in. Context: Cutout Width 36.188 in Depth 36.8125 in Depth Closed Excluding Handles 34.75 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Freezer Ca

Other evidence found

• 34.6063 in — superseded

  105533467.pdf; page 1. Model scope: not separately recorded. Raw value: Table Depth With Handles E: 34.6063". The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 36.81 in. Context: Cutout Width 36.188 in Depth 36.8125 in Depth Closed Excluding Handles 34.75 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Freezer Ca

• 34.625 in — superseded

  105533467.pdf; page 1. Model scope: not separately recorded. Raw value: Depth - With Handles = 34-5/8 in.. The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 36.81 in. Context: Cutout Width 36.188 in Depth 36.8125 in Depth Closed Excluding Handles 34.75 in Depth Closed Including Handles 36.813 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Freezer Ca

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide French Door Bottom Mount Refrigerator - 25 cu. ft. Print Resist Blk Stnlss WRMF3636RV | Whirlpool
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model page: Depth With Door Open 90 Degree 49 in.
Reviewed: 2026-09-04

Official exact-model page: Depth With Door Open 90 Degree 49 in.

Why this value was used

Official exact-model page: Depth With Door Open 90 Degree 49 in.

Other evidence found

• 47.9921 in — superseded

  105533467.pdf; page 1. Model scope: not separately recorded. Raw value: Table Doors Open 90 C: 121.9 cm (47.9921"). The final reviewed registry supersedes this earlier audit value. Official exact-model page: Depth With Door Open 90 Degree 49 in.

• 48 in — superseded

  105533467.pdf; page 1. Model scope: not separately recorded. Raw value: Depth - Doors Open 90° = 48 in.. The final reviewed registry supersedes this earlier audit value. Official exact-model page: Depth With Door Open 90 Degree 49 in.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.19 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide French Door Bottom Mount Refrigerator - 25 cu. ft. Print Resist Blk Stnlss WRMF3636RV | Whirlpool
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cutout Width: 36.19 in | Width 35.938 in Capacity 24.5 cu. ft. Common Size 36 in Cutout Height 70.18
Reviewed: 2026-09-04

Cutout Width: 36.19 in | Width 35.938 in Capacity 24.5 cu. ft. Common Size 36 in Cutout Height 70.188 in Cutout Width 36.188 in Depth 36.8125 in Depth Closed Excluding Handles 34.75 in Depth Closed Including

Why this value was used

Cutout Width: 36.19 in | Width 35.938 in Capacity 24.5 cu. ft. Common Size 36 in Cutout Height 70.188 in Cutout Width 36.188 in Depth 36.8125 in Depth Closed Excluding Handles 34.75 in Depth Closed Including

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202409/dimension-guide-w11738611-reva.pdf
Whirlpool · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 70.125 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 70.125 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

30.88 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202409/dimension-guide-w11738611-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.88 in plus documented rear clearance 1.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 29.88 in plus documented rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRMF3636R*

Confidence label: medium.

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202409/dimension-guide-w11738611-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

1/2" of space on each side

Why this value was used

1/2" of space on each side Calculation or inference: documented DOE model pattern WRMF3636R*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRMF3636R*

Confidence label: medium.

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202409/dimension-guide-w11738611-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

1/2" of space on each side

Why this value was used

1/2" of space on each side Calculation or inference: documented DOE model pattern WRMF3636R*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRMF3636R*

Confidence label: medium.

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202409/dimension-guide-w11738611-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

1/2" of space on each side and at the top

Why this value was used

1/2" of space on each side and at the top Calculation or inference: documented DOE model pattern WRMF3636R*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRMF3636R*

Confidence label: medium.

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202409/dimension-guide-w11738611-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

1" space behind

Why this value was used

1" space behind Calculation or inference: documented DOE model pattern WRMF3636R*.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.48 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRMF3636RV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

(6.3 cm) minimum on the hinge side

Why this value was used

(6.3 cm) minimum on the hinge side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.625 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRMF3636RV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Width - Cabinet = 35-5/8 in.

Why this value was used

Width - Cabinet = 35-5/8 in.

Other evidence found

• 35.6299 in — superseded

  105533467.pdf; page 1. Model scope: not separately recorded. Raw value: Table Width Cabinet H: 35.6299". The final reviewed registry supersedes this earlier audit value. Width - Cabinet = 35-5/8 in.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

2.4803 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRMF3636RV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

(6.3 cm) minimum on the hinge side

Why this value was used

(6.3 cm) minimum on the hinge side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.