Measurement evidence for Whirlpool WRMF3336SW

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Whirlpool WRMF3336SW fit check Check this model against your opening How ExactFit verifies measurements

Whirlpool WRMF3336SW

French Door · Standard-depth
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Complete mixed evidence

3exact-model manufacturer values

1verified equivalent/same-chassis values

9secondary-source-only values

3values with unresolved source details

Last reviewed: 2026-09-05. 8 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	35.8125 in	✓ Secondary source only	Whirlpool WRMF3336SW 36 Inch Freestanding 4-Door French Door Refrigerator with 30 cu. ft. Capacity, Glass Shelves, Gallon Bins, Temperature Drawer, In-Door Water Dispenser, Ice Maker, ENERGY STAR®, and Star K: White www.ajmadison.com	Retained specification excerpt: Exact-model cached specification: net Width = 35.8125 in \| s Control Lockout: Yes Child Lock: Yes Do
Value used by ExactFit 35.8125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRMF3336SW 36 Inch Freestanding 4-Door French Door Refrigerator with 30 cu. ft. Capacity, Glass Shelves, Gallon Bins, Temperature Drawer, In-Door Water Dispenser, Ice Maker, ENERGY STAR®, and Star K: White www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Exact-model cached specification: net Width = 35.8125 in \| s Control Lockout: Yes Child Lock: Yes Do Reviewed: 2026-09-04 Exact-model cached specification: net Width = 35.8125 in \| s Control Lockout: Yes Child Lock: Yes Door Ajar/Open Alarm: Yes Dimensions Cabinet Width: 35 13/16" Width of Door Fully Open 135°: 14" Depth with Doors: 34 3/4" Depth without Door Open original source ↗ Why this value was used Exact-model cached specification: net Width = 35.8125 in \| s Control Lockout: Yes Child Lock: Yes Door Ajar/Open Alarm: Yes Dimensions Cabinet Width: 35 13/16" Width of Door Fully Open 135°: 14" Depth with Doors: 34 3/4" Depth without Door Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	69 in	✓ Secondary source only	Whirlpool WRMF3336SW Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 69 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRMF3336SW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 C* Height to top of cabinet -> 69" (1753 mm) Open original source ↗ Why this value was used C* Height to top of cabinet -> 69" (1753 mm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	70.0625 in	✓ Secondary source only	WRMF3336SW Whirlpool French Door Refrigerator 36 inch 30 cu. ft. Canada - Sale! Best Price, Reviews and Specs www.canadianappliance.ca	Retained specification excerpt: Exact-model cached specification: Height to Top of Door Hinge = 70.0625 in \| Width 36 inches Height
Value used by ExactFit 70.0625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence WRMF3336SW Whirlpool French Door Refrigerator 36 inch 30 cu. ft. Canada - Sale! Best Price, Reviews and Specs www.canadianappliance.ca · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Exact-model cached specification: Height to Top of Door Hinge = 70.0625 in \| Width 36 inches Height Reviewed: 2026-09-04 Exact-model cached specification: Height to Top of Door Hinge = 70.0625 in \| Width 36 inches Height to Top of Case 69 inches Height to Top of Door 69 inches Height to Top of Door Hinge 70 1/16 inches Depth Including Doors 34 3/4 inches Depth (Excluding Handles) 34 3/4 inches Dep Open original source ↗ Why this value was used Exact-model cached specification: Height to Top of Door Hinge = 70.0625 in \| Width 36 inches Height to Top of Case 69 inches Height to Top of Door 69 inches Height to Top of Door Hinge 70 1/16 inches Depth Including Doors 34 3/4 inches Depth (Excluding Handles) 34 3/4 inches Dep Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	29.875 in	✓ Secondary source only	Whirlpool WRMF3336SW Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 29.875 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRMF3336SW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 F Depth without doors -> 297/8" (758.8 mm) Open original source ↗ Why this value was used F Depth without doors -> 297/8" (758.8 mm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	34.75 in	✓ Secondary source only	Whirlpool WRMF3336SW Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 34.75 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRMF3336SW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 E Depth with doors -> 34 3/4" (882.3 mm) Open original source ↗ Why this value was used E Depth with doors -> 34 3/4" (882.3 mm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	Unknown	? Not found · Calculated/inferred	Whirlpool® 30 Cu. Ft. Family-Sized Capacity French Door Refrigerator with Flexible Temperature Drawer Fingerprint-Resistant Stainless Finish WRMF3336SZ \| Whirlpool Whirlpool	Retained specification excerpt: Unanimous same-family value 34.75 in from WRMF3336SZ; at least five existing product dimensions matc
Value used by ExactFit Unknown · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: same finish/model family (WRMF3336S) propagation from WRMF3336SZ Confidence label: medium. Primary evidence Whirlpool® 30 Cu. Ft. Family-Sized Capacity French Door Refrigerator with Flexible Temperature Drawer Fingerprint-Resistant Stainless Finish WRMF3336SZ \| Whirlpool Whirlpool · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Unanimous same-family value 34.75 in from WRMF3336SZ; at least five existing product dimensions matc Reviewed: 2026-09-04 Unanimous same-family value 34.75 in from WRMF3336SZ; at least five existing product dimensions match and none conflict. Donor evidence: Depth Closed Including Handles: 34.75 in \| n Cutout Width 36.188 in Depth 34.75 in Depth Closed Excluding Handles 34.75 in Depth Closed Including Handles 34.75 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Freezer Ca Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 34.75 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	49 in	✓ Secondary source only	Whirlpool WRMF3336SW Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 49 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRMF3336SW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 K Depth with doors open 90° -> 49" (1245.2 mm) Open original source ↗ Why this value was used K Depth with doors open 90° -> 49" (1245.2 mm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	Unknown	? Not found · Calculated/inferred	Whirlpool measurement source — https://www.ajmadison.com/cgi-bin/ajmadison/WRMF3336SW.html + local-cache manufacturer-family consensus www.ajmadison.com	Retained specification excerpt: Derived minimum opening width 36.8125 in from product width 35.8125 in and explicit 0.5 in clearance
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 35.8125 + 2 * 0.5 Confidence label: medium. Primary evidence Whirlpool measurement source — https://www.ajmadison.com/cgi-bin/ajmadison/WRMF3336SW.html + local-cache manufacturer-family consensus www.ajmadison.com · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Derived minimum opening width 36.8125 in from product width 35.8125 in and explicit 0.5 in clearance Reviewed: 2026-09-04 Derived minimum opening width 36.8125 in from product width 35.8125 in and explicit 0.5 in clearance on each side. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 36.8125 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	70.5625 in	✓ Secondary source only · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf Whirlpool	Page 2
Value used by ExactFit 70.5625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf Whirlpool · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Minimum opening height derived from highest stored appliance endpoint 70.0625 in plus documented top clearance 0.5 in. Open original source ↗ Why this value was used Minimum opening height derived from highest stored appliance endpoint 70.0625 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	31.875 in	✓ Secondary source only · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf Whirlpool	Page 2
Value used by ExactFit 31.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf Whirlpool · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Minimum opening depth derived from case-only depth 29.875 in plus documented rear clearance 2.0 in. Open original source ↗ Why this value was used Minimum opening depth derived from case-only depth 29.875 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	0.5 in	✓ Verified — exact model · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf Whirlpool	Page 2
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRMF3336SW Confidence label: high. Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 1/2" space on each side Open original source ↗ Why this value was used 1/2" space on each side Calculation or inference: documented DOE model pattern WRMF3336SW. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	0.5 in	✓ Verified — exact model · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf Whirlpool	Page 2
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRMF3336SW Confidence label: high. Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 1/2" space on each side Open original source ↗ Why this value was used 1/2" space on each side Calculation or inference: documented DOE model pattern WRMF3336SW. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	0.5 in	✓ Verified — exact model · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf Whirlpool	Page 2
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRMF3336SW Confidence label: medium. Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 1/2" space on each side and at the top Open original source ↗ Why this value was used 1/2" space on each side and at the top Calculation or inference: documented DOE model pattern WRMF3336SW. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	2 in	✓ Verified — exact model · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf Whirlpool	Page 2
Value used by ExactFit 2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRMF3336SW Confidence label: medium. Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 2" space behind Open original source ↗ Why this value was used 2" space behind Calculation or inference: documented DOE model pattern WRMF3336SW. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	3.75 in	✓ Verified — equivalent model · Calculated/inferred	Whirlpool WRMF3336SV Dimension Guide assets.skulytics.io	Page 2
Value used by ExactFit 3.75 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidence Whirlpool WRMF3336SV Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 next to a fixed wall, leave a minimum space of 3.75" Open original source ↗ Why this value was used next to a fixed wall, leave a minimum space of 3.75" Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from WRMF3336SV applies Target model: WRMF3336SW. Supporting model: WRMF3336SV. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: next to a fixed wall, leave a minimum space of 3.75". Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	35.8125 in	✓ Secondary source only	Whirlpool WRMF3336SW 36 Inch Freestanding 4-Door French Door Refrigerator with 30 cu. ft. Capacity, Glass Shelves, Gallon Bins, Temperature Drawer, In-Door Water Dispenser, Ice Maker, ENERGY STAR®, and Star K: White www.ajmadison.com	Retained specification excerpt: Exact-model cached specification: Cabinet Width = 35.8125 in \| : Yes Control Lockout: Yes Child Lock
Value used by ExactFit 35.8125 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRMF3336SW 36 Inch Freestanding 4-Door French Door Refrigerator with 30 cu. ft. Capacity, Glass Shelves, Gallon Bins, Temperature Drawer, In-Door Water Dispenser, Ice Maker, ENERGY STAR®, and Star K: White www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Exact-model cached specification: Cabinet Width = 35.8125 in \| : Yes Control Lockout: Yes Child Lock Reviewed: 2026-09-04 Exact-model cached specification: Cabinet Width = 35.8125 in \| : Yes Control Lockout: Yes Child Lock: Yes Door Ajar/Open Alarm: Yes Dimensions Cabinet Width: 35 13/16" Width of Door Fully Open 135°: 14" Depth with Doors: 34 3/4" Depth without Door Open original source ↗ Why this value was used Exact-model cached specification: Cabinet Width = 35.8125 in \| : Yes Control Lockout: Yes Child Lock: Yes Door Ajar/Open Alarm: Yes Dimensions Cabinet Width: 35 13/16" Width of Door Fully Open 135°: 14" Depth with Doors: 34 3/4" Depth without Door Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	Unknown	? Not found · Calculated/inferred	Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io	Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Freestanding Whirlpool-platform family side clearance Confidence label: low. Primary evidence Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-04 Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern. Open original source ↗ Why this value was used A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Measurements not established

Depth with handle

Not found for safe fit use. Sources retained: https://www.whirlpool.com/kitchen/refrigeration/refrigerators/french-door/p.whirlpool-30-cu.-ft.-family-sized-capacity-french-door-refrigerator-with-flexible-temperature-drawer.wrmf3336sz.html. Related-model record: WRMF3336SW.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Minimum cutout width

Not found for safe fit use. Sources retained: https://www.ajmadison.com/cgi-bin/ajmadison/WRMF3336SW.html + local-cache manufacturer-family consensus. Related-model record: WRMF3336SW.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Adjoining-wall clearance (reviewed endpoint)

Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: WRMF3336SW.

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Source documents and pages