Measurement evidence for Whirlpool WRMF3336SV

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in mapped from populated case_width_in; doors do not materially change closed product width

Confidence label: low.

Primary evidence

WRMF3336SV Whirlpool French Door Refrigerator 36 inch 30 cu. ft. Canada - Sale! Best Price, Reviews and Specs
www.canadianappliance.ca · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Low-confidence same-appliance width mapping: width_doors_closed_in=35.8125 in from case_width_in.
Reviewed: 2026-09-04

Low-confidence same-appliance width mapping: width_doors_closed_in=35.8125 in from case_width_in.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 35.8125 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRMF3336SV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

C* Height to top of cabinet -> 69" (1753 mm)

Why this value was used

C* Height to top of cabinet -> 69" (1753 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.0625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

WRMF3336SV Whirlpool French Door Refrigerator 36 inch 30 cu. ft. Canada - Sale! Best Price, Reviews and Specs
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached specification: Height to Top of Door Hinge = 70.0625 in | ches Width (Alternate L
Reviewed: 2026-09-04

Exact-model cached specification: Height to Top of Door Hinge = 70.0625 in | ches Width (Alternate Listing) 35 3/4 inches Height to Top of Cabinet 69 inches Height to Top of Door Hinge 70 1/16 inches Depth Including Door 34 3/4 inches Depth (Alternate Listing) 36 25/32 inches Ic

Why this value was used

Exact-model cached specification: Height to Top of Door Hinge = 70.0625 in | ches Width (Alternate Listing) 35 3/4 inches Height to Top of Cabinet 69 inches Height to Top of Door Hinge 70 1/16 inches Depth Including Door 34 3/4 inches Depth (Alternate Listing) 36 25/32 inches Ic

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRMF3336SV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

F Depth without doors -> 297/8" (758.8 mm)

Why this value was used

F Depth without doors -> 297/8" (758.8 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

34.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRMF3336SV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

E Depth with doors -> 34 3/4" (882.3 mm)

Why this value was used

E Depth with doors -> 34 3/4" (882.3 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same finish/model family (WRMF3336S) propagation from WRMF3336SZ

Confidence label: medium.

Primary evidence

Whirlpool® 30 Cu. Ft. Family-Sized Capacity French Door Refrigerator with Flexible Temperature Drawer Fingerprint-Resistant Stainless Finish WRMF3336SZ | Whirlpool
Whirlpool · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Unanimous same-family value 34.75 in from WRMF3336SZ; at least five existing product dimensions matc
Reviewed: 2026-09-04

Unanimous same-family value 34.75 in from WRMF3336SZ; at least five existing product dimensions match and none conflict. Donor evidence: Depth Closed Including Handles: 34.75 in | n Cutout Width 36.188 in Depth 34.75 in Depth Closed Excluding Handles 34.75 in Depth Closed Including Handles 34.75 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Freezer Ca

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 34.75 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRMF3336SV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

K Depth with doors open 90° -> 49" (1245.2 mm)

Why this value was used

K Depth with doors open 90° -> 49" (1245.2 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 35.8125 + 2 * 0.5

Confidence label: medium.

Primary evidence

Whirlpool measurement source — https://www.canadianappliance.ca/product/Whirlpool_WRMF3336SV_French_Door_Refrigerator_Whirlpool_WRMF3336SV.html + local-cache manufacturer-family consensus
www.canadianappliance.ca · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Derived minimum opening width 36.8125 in from product width 35.8125 in and explicit 0.5 in clearance
Reviewed: 2026-09-04

Derived minimum opening width 36.8125 in from product width 35.8125 in and explicit 0.5 in clearance on each side.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 36.8125 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.5625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf
Whirlpool · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 70.0625 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 70.0625 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf
Whirlpool · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.875 in plus documented rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 29.875 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRMF3336SV

Confidence label: high.

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern WRMF3336SV.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRMF3336SV

Confidence label: high.

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern WRMF3336SV.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRMF3336SV

Confidence label: medium.

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side and at the top

Why this value was used

1/2" space on each side and at the top Calculation or inference: documented DOE model pattern WRMF3336SV.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRMF3336SV

Confidence label: medium.

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/dimension-guide-w11783870-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

2" space behind

Why this value was used

2" space behind Calculation or inference: documented DOE model pattern WRMF3336SV.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Whirlpool WRMF3336SV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

next to a fixed wall, leave a minimum space of 3.75"

Why this value was used

next to a fixed wall, leave a minimum space of 3.75" Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.8125 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

WRMF3336SV Whirlpool French Door Refrigerator 36 inch 30 cu. ft. Canada - Sale! Best Price, Reviews and Specs
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached specification: Width (Cabinet) = 35.8125 in | Full Depth) Capacity (Total) 30.0 C
Reviewed: 2026-09-04

Exact-model cached specification: Width (Cabinet) = 35.8125 in | Full Depth) Capacity (Total) 30.0 Cu Ft Capacity (Alternate Listing) 29.8 Cu Ft Width (Cabinet) 35 13/16 inches Width (Alternate Listing) 35 3/4 inches Height to Top of Cabinet 69 inches Heig

Why this value was used

Exact-model cached specification: Width (Cabinet) = 35.8125 in | Full Depth) Capacity (Total) 30.0 Cu Ft Capacity (Alternate Listing) 29.8 Cu Ft Width (Cabinet) 35 13/16 inches Width (Alternate Listing) 35 3/4 inches Height to Top of Cabinet 69 inches Heig

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Freestanding Whirlpool-platform family side clearance

Confidence label: low.

Primary evidence

Whirlpool measurement source — local-cache manufacturer-family consensus
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-04

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.