Measurement evidence for Whirlpool WRFF5333PW

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Whirlpool WRFF5333PW fit check Check this model against your opening How ExactFit verifies measurements

Whirlpool WRFF5333PW

Unknown configuration · Standard-depth
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Incomplete evidence

8exact-model manufacturer values

3verified equivalent/same-chassis values

2secondary-source-only values

3values with unresolved source details

Last reviewed: 2026-09-05. 5 retained source records. 0 unresolved conflicts. Not every fit-critical input is supported.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

ExactFit does not have sufficient evidence for every fit-critical measurement. The fit checker will return Uncertain unless a known measurement already proves that the model does not fit.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	32.626 in	✓ Verified — exact model	33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool	Retained specification excerpt: net Width = 32.626 in \| ar/Open Alarm Yes LCD Touch Screen No Max Cool/Fast Cool Yes ### Dimensions
Value used by ExactFit 32.626 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence 33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: net Width = 32.626 in \| ar/Open Alarm Yes LCD Touch Screen No Max Cool/Fast Cool Yes ### Dimensions Reviewed: 2026-09-04 net Width = 32.626 in \| ar/Open Alarm Yes LCD Touch Screen No Max Cool/Fast Cool Yes ### Dimensions Cabinet Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in Depth Closed Including Ha Open original source ↗ Why this value was used net Width = 32.626 in \| ar/Open Alarm Yes LCD Touch Screen No Max Cool/Fast Cool Yes ### Dimensions Cabinet Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in Depth Closed Including Ha Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	68.875 in	✓ Verified — exact model	33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool	Retained specification excerpt: Height To Top Of Cabinet = 68.875 in \| 5 in Freezer Capacity Volume 6.45 cu. ft. Gross Weight 276 lb
Value used by ExactFit 68.875 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence 33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Height To Top Of Cabinet = 68.875 in \| 5 in Freezer Capacity Volume 6.45 cu. ft. Gross Weight 276 lb Reviewed: 2026-09-04 Height To Top Of Cabinet = 68.875 in \| 5 in Freezer Capacity Volume 6.45 cu. ft. Gross Weight 276 lbs Height 70.125 in Height To Top Of Cabinet 68.875 in Height To Top Of Door Hinge 70.125 in Net Weight 265 lbs Total Refrigerator Cap Open original source ↗ Why this value was used Height To Top Of Cabinet = 68.875 in \| 5 in Freezer Capacity Volume 6.45 cu. ft. Gross Weight 276 lbs Height 70.125 in Height To Top Of Cabinet 68.875 in Height To Top Of Door Hinge 70.125 in Net Weight 265 lbs Total Refrigerator Cap Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	70.125 in	✓ Verified — exact model	33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool	Retained specification excerpt: Height To Top Of Door Hinge = 70.125 in \| u. ft. Gross Weight 276 lbs Height 70.125 in Height To Top
Value used by ExactFit 70.125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence 33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Height To Top Of Door Hinge = 70.125 in \| u. ft. Gross Weight 276 lbs Height 70.125 in Height To Top Reviewed: 2026-09-04 Height To Top Of Door Hinge = 70.125 in \| u. ft. Gross Weight 276 lbs Height 70.125 in Height To Top Of Cabinet 68.875 in Height To Top Of Door Hinge 70.125 in Net Weight 265 lbs Total Refrigerator Capacity Volume 22.1 cu. ft. Width 32.625 Open original source ↗ Why this value was used Height To Top Of Door Hinge = 70.125 in \| u. ft. Gross Weight 276 lbs Height 70.125 in Height To Top Of Cabinet 68.875 in Height To Top Of Door Hinge 70.125 in Net Weight 265 lbs Total Refrigerator Capacity Volume 22.1 cu. ft. Width 32.625 Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	28.125 in	✓ Verified — exact model	33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool	Retained specification excerpt: Depth Excluding Doors = 28.125 in \| Depth Closed Excluding Handles 31.34 in Depth Closed Including H
Value used by ExactFit 28.125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence 33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Excluding Doors = 28.125 in \| Depth Closed Excluding Handles 31.34 in Depth Closed Including H Reviewed: 2026-09-04 Depth Excluding Doors = 28.125 in \| Depth Closed Excluding Handles 31.34 in Depth Closed Including Handles 33.31 in Depth Excluding Doors 28.125 in Depth With Door Open 90 Degree 47.125 in Freezer Capacity Volume 6.45 cu. ft. G Open original source ↗ Why this value was used Depth Excluding Doors = 28.125 in \| Depth Closed Excluding Handles 31.34 in Depth Closed Including Handles 33.31 in Depth Excluding Doors 28.125 in Depth With Door Open 90 Degree 47.125 in Freezer Capacity Volume 6.45 cu. ft. G Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	31.34 in	✓ Verified — exact model	33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool	Retained specification excerpt: Depth Closed Excluding Handles = 31.34 in \| No Max Cool/Fast Cool Yes ### Dimensions Cabinet Width
Value used by ExactFit 31.34 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence 33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Closed Excluding Handles = 31.34 in \| No Max Cool/Fast Cool Yes ### Dimensions Cabinet Width Reviewed: 2026-09-04 Depth Closed Excluding Handles = 31.34 in \| No Max Cool/Fast Cool Yes ### Dimensions Cabinet Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in Depth Closed Including Handles 33.31 in Depth Excluding Doors 28.125 in Depth W Open original source ↗ Why this value was used Depth Closed Excluding Handles = 31.34 in \| No Max Cool/Fast Cool Yes ### Dimensions Cabinet Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in Depth Closed Including Handles 33.31 in Depth Excluding Doors 28.125 in Depth W Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	33.31 in	✓ Conflicting sources — resolved	33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool	Retained specification excerpt: Depth Closed Including Handles = 33.31 in \| s Cabinet Width 32.625 in Depth 34.5 in Depth Closed Exc
Value used by ExactFit 33.31 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence 33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Closed Including Handles = 33.31 in \| s Cabinet Width 32.625 in Depth 34.5 in Depth Closed Exc Reviewed: 2026-09-04 Depth Closed Including Handles = 33.31 in \| s Cabinet Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in Depth Closed Including Handles 33.31 in Depth Excluding Doors 28.125 in Depth With Door Open 90 Degree 47.125 in Freeze Open original source ↗ Why this value was used Depth Closed Including Handles = 33.31 in \| s Cabinet Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in Depth Closed Including Handles 33.31 in Depth Excluding Doors 28.125 in Depth With Door Open 90 Degree 47.125 in Freeze Other evidence found 90 in — superseded https://www.abcwarehouse.com/whirlpool-wrff5333pw; location not retained. Model scope: not separately recorded. Raw value: product depth : Depth With Door Open 90 Degree . The final reviewed registry supersedes this earlier audit value. Depth Closed Including Handles = 33.31 in \| s Cabinet Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in Depth Closed Including Handles 33.31 in Depth Excluding Doors 28.125 in Depth With Door Open 90 Degree 47.125 in Freeze Open alternative source ↗ Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	47.125 in	✓ Verified — exact model	33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool	Retained specification excerpt: Depth With Door Open 90 = 47.125 in \| 1.34 in Depth Closed Including Handles 33.31 in Depth Excludin
Value used by ExactFit 47.125 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence 33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth With Door Open 90 = 47.125 in \| 1.34 in Depth Closed Including Handles 33.31 in Depth Excludin Reviewed: 2026-09-04 Depth With Door Open 90 = 47.125 in \| 1.34 in Depth Closed Including Handles 33.31 in Depth Excluding Doors 28.125 in Depth With Door Open 90 Degree 47.125 in Freezer Capacity Volume 6.45 cu. ft. Gross Weight 276 lbs Height 70.125 in Heig Open original source ↗ Why this value was used Depth With Door Open 90 = 47.125 in \| 1.34 in Depth Closed Including Handles 33.31 in Depth Excluding Doors 28.125 in Depth With Door Open 90 Degree 47.125 in Freezer Capacity Volume 6.45 cu. ft. Gross Weight 276 lbs Height 70.125 in Heig Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	Unknown	? Not found · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.ca/en_ca/kitchen/refrigeration/refrigerators/french-door/p.33-inch-wide-french-door-refrigerator-22-cu.-ft.wrff5333pw.html + local-cache manufacturer-family consensus www.whirlpool.ca	Retained specification excerpt: Derived minimum opening width 33.626 in from product width 32.626 in and explicit 0.5 in clearance o
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(case width, width doors closed) + 2 * explicit side clearance = 32.626 + 2 * 0.5 Confidence label: medium. Primary evidence Whirlpool measurement source — https://www.whirlpool.ca/en_ca/kitchen/refrigeration/refrigerators/french-door/p.33-inch-wide-french-door-refrigerator-22-cu.-ft.wrff5333pw.html + local-cache manufacturer-family consensus www.whirlpool.ca · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Derived minimum opening width 33.626 in from product width 32.626 in and explicit 0.5 in clearance o Reviewed: 2026-09-04 Derived minimum opening width 33.626 in from product width 32.626 in and explicit 0.5 in clearance on each side. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 33.626 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	70.625 in	✓ Verified — equivalent model · Calculated/inferred	Maytag MRFF5033PZ Owners Manual assets.skulytics.io	Page 8
Value used by ExactFit 70.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence Maytag MRFF5033PZ Owners Manual assets.skulytics.io · Owners Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-05 Minimum opening height derived from highest appliance endpoint 70.125 in plus documented top clearance 0.5 in. Open original source ↗ Why this value was used Minimum opening height derived from highest appliance endpoint 70.125 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Why evidence from MRFF5033PZ applies Target model: WRFF5333PW. Supporting model: MRFF5033PZ. Manufacturer: Whirlpool. Product family and measurement relationship: max(height_case_in,height_hinge_in) + top_clearance_in. Measurement transferred: Minimum cutout height. Relevant equivalence evidence: Minimum opening height derived from highest appliance endpoint 70.125 in plus documented top clearance 0.5 in.. Known differences: not separately recorded. Review decision: calculated formula; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	29.125 in	✓ Secondary source only · Calculated/inferred	Whirlpool WRFF5333PW Owners Manual assets.skulytics.io	Page 8
Value used by ExactFit 29.125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence Whirlpool WRFF5333PW Owners Manual assets.skulytics.io · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-05 Whirlpool opening envelope: 28.125 + 1.0 = 29.125 in. Open original source ↗ Why this value was used Whirlpool opening envelope: 28.125 + 1.0 = 29.125 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	Unknown	? Not found	Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io	Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-05 Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern. Open original source ↗ Why this value was used The retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	Unknown	? Not found	Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io	Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-05 Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern. Open original source ↗ Why this value was used The retained record does not establish source scope or a resolvable supporting source. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	0.5 in	✓ Verified — equivalent model · Calculated/inferred	Maytag MRFF5033PZ Owners Manual assets.skulytics.io	Page 8
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidence Maytag MRFF5033PZ Owners Manual assets.skulytics.io · Owners Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-05 1.25 cm) of space on each side and at the top Open original source ↗ Why this value was used 1.25 cm) of space on each side and at the top Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from MRFF5033PZ applies Target model: WRFF5333PW. Supporting model: MRFF5033PZ. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Top clearance. Relevant equivalence evidence: 1.25 cm) of space on each side and at the top. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	1 in	✓ Secondary source only	Whirlpool WRFF5333PW Owners Manual assets.skulytics.io	Page 8
Value used by ExactFit 1 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRFF5333PW Owners Manual assets.skulytics.io · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-05 Allow for 1" (2.54 cm) of space behind the refrigerator. Open original source ↗ Why this value was used Allow for 1" (2.54 cm) of space behind the refrigerator. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	2.5 in	✓ Verified — equivalent model · Calculated/inferred	Maytag MRFF5033PZ Owners Manual assets.skulytics.io	Page 8
Value used by ExactFit 2.5 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidence Maytag MRFF5033PZ Owners Manual assets.skulytics.io · Owners Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-05 next to a fixed wall, leave 2 1/2" (6.3 cm Open original source ↗ Why this value was used next to a fixed wall, leave 2 1/2" (6.3 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from MRFF5033PZ applies Target model: WRFF5333PW. Supporting model: MRFF5033PZ. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: next to a fixed wall, leave 2 1/2" (6.3 cm. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	32.625 in	✓ Verified — exact model	33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool	Retained specification excerpt: Cabinet Width = 32.625 in \| r Ajar/Open Alarm Yes LCD Touch Screen No Max Cool/Fast Cool Yes ### Dim
Value used by ExactFit 32.625 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence 33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW \| Whirlpool Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Cabinet Width = 32.625 in \| r Ajar/Open Alarm Yes LCD Touch Screen No Max Cool/Fast Cool Yes ### Dim Reviewed: 2026-09-04 Cabinet Width = 32.625 in \| r Ajar/Open Alarm Yes LCD Touch Screen No Max Cool/Fast Cool Yes ### Dimensions Cabinet Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in Depth Closed Including Ha Open original source ↗ Why this value was used Cabinet Width = 32.625 in \| r Ajar/Open Alarm Yes LCD Touch Screen No Max Cool/Fast Cool Yes ### Dimensions Cabinet Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in Depth Closed Including Ha Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	Unknown	? Not found · Calculated/inferred	Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io	Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Value used by ExactFit Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Freestanding Whirlpool-platform family side clearance Confidence label: low. Primary evidence Whirlpool measurement source — local-cache manufacturer-family consensus assets.skulytics.io · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt Reviewed: 2026-09-04 Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern. Open original source ↗ Why this value was used A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Conflicting published measurements

Depth with handle

Selected: 33.31 in. Earlier retained values: 90 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Depth Closed Including Handles = 33.31 in | s Cabinet Width 32.625 in Depth 34.5 in Depth Closed Excluding Handles 31.34 in Depth Closed Including Handles 33.31 in Depth Excluding Doors 28.125 in Depth With Door Open 90 Degree 47.125 in Freeze

View source scope, location, and impact on fit

Measurements not established

Minimum cutout width

Not found for safe fit use. Sources retained: https://www.whirlpool.ca/en_ca/kitchen/refrigeration/refrigerators/french-door/p.33-inch-wide-french-door-refrigerator-22-cu.-ft.wrff5333pw.html + local-cache manufacturer-family consensus. Related-model record: WRFF5333PW.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Left-side ventilation clearance

Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: WRFF5333PW.

The retained record does not establish source scope or a resolvable supporting source.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Right-side ventilation clearance

Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: WRFF5333PW.

The retained record does not establish source scope or a resolvable supporting source.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Adjoining-wall clearance (reviewed endpoint)

Not found for safe fit use. Sources retained: local-cache manufacturer-family consensus. Related-model record: WRFF5333PW.

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Source documents and pages

33-inch Wide French Door Refrigerator - 22 cu. ft. White WRFF5333PW | Whirlpool

Whirlpool · Web source · exact model/source

Model numbers covered: WRFF5333PW. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

8 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Cabinet case width.