Measurement evidence for Whirlpool WRFF3736SW

Value used by ExactFit

35.8125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRFF3536SV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Visual family table: cabinet/product closed width = 35 13/16 in.

Why this value was used

Visual family table: cabinet/product closed width = 35 13/16 in.

Other evidence found

• 35.75 in — superseded

  https://www.whirlpool.com/kitchen/refrigeration/refrigerators/french-door/p.36-inch-french-door-refrigerator-with-dual-ice-makers-30-cu.-ft.wrff3736sw.html; location not retained. Model scope: not separately recorded. Raw value: net Width: 35.75 in | on of Home Appliance Manufacturers) Sustainability Standards ### Dimensions Cabinet Width 35.75 in Capacity 29.58 cu. ft. Common Size 36 in Depth 36.75 in Depth Closed Excluding . The final reviewed registry supersedes this earlier audit value. Visual family table: cabinet/product closed width = 35 13/16 in.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRFF3736SW French Door Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: height of recessed refrigerator: $ 69^{{1}}/_{{64}} $" (1753 mm)
Reviewed: 2026-09-04

height of recessed refrigerator: $ 69^{{1}}/_{{64}} $" (1753 mm)

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 69 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.0625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRFF3536SV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Visual family table: Height of top of hinges = 70 1/16 in.

Why this value was used

Visual family table: Height of top of hinges = 70 1/16 in.

Other evidence found

• 70 in — superseded

  OpenParser batch opj_YuKFA69egm2Ym6s1RfqTr; location not retained. Model scope: not separately recorded. Raw value: height of top of hinges: $ 70^{{1}}/_{{16}} $" (1779.5 mm). The final reviewed registry supersedes this earlier audit value. Visual family table: Height of top of hinges = 70 1/16 in.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRFF3536SV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Visual family table: Depth without doors = 29 7/8 in.

Why this value was used

Visual family table: Depth without doors = 29 7/8 in.

Other evidence found

• 29 in — superseded

  OpenParser batch opj_YuKFA69egm2Ym6s1RfqTr; location not retained. Model scope: not separately recorded. Raw value: depth without doors: $ 29^{{7}}/_{{8}} $" (758.8 mm). The final reviewed registry supersedes this earlier audit value. Visual family table: Depth without doors = 29 7/8 in.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

34.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRFF3536SV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Visual family table: Depth with doors, without projecting handle = 34 3/4 in.

Why this value was used

Visual family table: Depth with doors, without projecting handle = 34 3/4 in.

Other evidence found

• 34 in — superseded

  OpenParser batch opj_YuKFA69egm2Ym6s1RfqTr; location not retained. Model scope: not separately recorded. Raw value: depth with doors: $ 34^{{47}}/_{{64}} $" (882.3 mm). The final reviewed registry supersedes this earlier audit value. Visual family table: Depth with doors, without projecting handle = 34 3/4 in.

• 34.69 in — superseded

  https://www.whirlpool.com/kitchen/refrigeration/refrigerators/french-door/p.36-inch-french-door-refrigerator-with-dual-ice-makers-30-cu.-ft.wrff3736sw.html; location not retained. Model scope: not separately recorded. Raw value: Reviewed cached exact-model manufacturer label: Depth Closed Excluding Handles = 34.69 in. Context: Cabinet Width 35.75 in Capacity 29.58 cu. ft. Common Size 36 in Depth 36.75 in Depth Closed Excluding Handles 34.6875 in Depth Closed Including Handles 36.75 in Depth Excluding Doors 29.875 in Depth W. The final reviewed registry supersedes this earlier audit value. Visual family table: Depth with doors, without projecting handle = 34 3/4 in.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.8125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRFF3536SV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Visual family table: Depth with door handle = 36 13/16 in.

Why this value was used

Visual family table: Depth with door handle = 36 13/16 in.

Other evidence found

• 36 in — superseded

  OpenParser batch opj_YuKFA69egm2Ym6s1RfqTr; location not retained. Model scope: not separately recorded. Raw value: depth with door handle: $ 36^{{25}}/_{{32}} $" (934.4 mm). The final reviewed registry supersedes this earlier audit value. Visual family table: Depth with door handle = 36 13/16 in.

• 36.75 in — superseded

  https://www.whirlpool.com/kitchen/refrigeration/refrigerators/french-door/p.36-inch-french-door-refrigerator-with-dual-ice-makers-30-cu.-ft.wrff3736sw.html; location not retained. Model scope: not separately recorded. Raw value: Reviewed cached exact-model manufacturer label: Depth Closed Including Handles = 36.75 in. Context: ft. Common Size 36 in Depth 36.75 in Depth Closed Excluding Handles 34.6875 in Depth Closed Including Handles 36.75 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Depth-Draw. The final reviewed registry supersedes this earlier audit value. Visual family table: Depth with door handle = 36 13/16 in.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch French Door Refrigerator with Dual Ice Makers - 30 cu. ft. White WRFF3736SW | Whirlpool
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth With Door Open 90: 49.0 in | 6875 in Depth Closed Including Handles 36.75 in Depth Excluding D
Reviewed: 2026-09-04

Depth With Door Open 90: 49.0 in | 6875 in Depth Closed Including Handles 36.75 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Depth-Drawer Open 55.6875 in Freezer Capacity Volume 9.01 cu. ft. Gross Weight

Why this value was used

Depth With Door Open 90: 49.0 in | 6875 in Depth Closed Including Handles 36.75 in Depth Excluding Doors 29.875 in Depth With Door Open 90 Degree 49 in Depth-Drawer Open 55.6875 in Freezer Capacity Volume 9.01 cu. ft. Gross Weight

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRFF3536SV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Verified width 35 13/16 in plus documented 1/2 in ventilation clearance per side.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 36.8125 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

• 36.75 in — superseded

  https://www.whirlpool.com/kitchen/refrigeration/refrigerators/french-door/p.36-inch-french-door-refrigerator-with-dual-ice-makers-30-cu.-ft.wrff3736sw.html + 105534962.pdf; page 2. Model scope: not separately recorded. Raw value: Minimum opening derived from exact product width plus explicit symmetric side spacing: 35.75 + 2 * 0.5 = 36.75 in. Side evidence: 1/2" (12.7 mm) | 1/2" (12.7 mm) 3.74" (95 mm) | To ensure proper ventilation for your refrigerator, allow for a 1/2" (12.7 mm) space on each side and at the top. Allow for a 1.97" (50 mm) | deterministic pattern: space_each_side. The final reviewed registry supersedes this earlier audit value. Verified width 35 13/16 in plus documented 1/2 in ventilation clearance per side.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf
Whirlpool · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 70.0625 in plus documented top clearance 0.5 in.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 70.5625 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf
Whirlpool · Web source
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.875 in plus documented rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 29.875 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRFF3736SW

Confidence label: high.

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

1/2" of space on each side

Why this value was used

1/2" of space on each side Calculation or inference: documented DOE model pattern WRFF3736SW.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRFF3736SW

Confidence label: high.

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

1/2" of space on each side

Why this value was used

1/2" of space on each side Calculation or inference: documented DOE model pattern WRFF3736SW.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRFF3736SW

Confidence label: medium.

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

1/2" of space on each side and 1/2ʺ at the top

Why this value was used

1/2" of space on each side and 1/2ʺ at the top Calculation or inference: documented DOE model pattern WRFF3736SW.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRFF3736SW

Confidence label: medium.

Primary evidence

Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf
Whirlpool · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

2" of space behind

Why this value was used

2" of space behind Calculation or inference: documented DOE model pattern WRFF3736SW.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.75 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Whirlpool WRFF3536SW Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

next to a fixed wall, leave a minimum space of 3.74"

Why this value was used

next to a fixed wall, leave a minimum space of 3.74" Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.8125 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRFF3536SV Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Visual family table WRFF3536S*/WRFF3736S*: Cabinet width = 35 13/16 in.

Why this value was used

Visual family table WRFF3536S*/WRFF3736S*: Cabinet width = 35 13/16 in.

Other evidence found

• 35 in — superseded

  OpenParser batch opj_YuKFA69egm2Ym6s1RfqTr; location not retained. Model scope: not separately recorded. Raw value: cabinet width: $ 35^{{25}}/_{{32}} $" (909 mm). The final reviewed registry supersedes this earlier audit value. Visual family table WRFF3536S*/WRFF3736S*: Cabinet width = 35 13/16 in.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

0.5 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool WRFF3736SW Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

1/2" (12.7 mm) | 1/2" (12.7 mm) 3.74" (95 mm) | To ensure proper ventilation for your refrigerator, allow for a 1/2" (12.7 mm) space on each side and at the top. Allow for a 1.97" (50 mm) | deterministic pattern: space_each_side

Why this value was used

1/2" (12.7 mm) | 1/2" (12.7 mm) 3.74" (95 mm) | To ensure proper ventilation for your refrigerator, allow for a 1/2" (12.7 mm) space on each side and at the top. Allow for a 1.97" (50 mm) | deterministic pattern: space_each_side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.