Measurement evidence for Whirlpool WRFF3736SV

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Whirlpool WRFF3736SV fit check Check this model against your opening How ExactFit verifies measurements

Whirlpool WRFF3736SV

French Door · Standard-depth
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Complete mixed evidence

4exact-model manufacturer values

1verified equivalent/same-chassis values

10secondary-source-only values

1values with unresolved source details

Last reviewed: 2026-09-05. 5 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	35.8125 in	✓ Secondary source only	Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 35.8125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Aligned with case_width_in (35.8125") Open original source ↗ Why this value was used Aligned with case_width_in (35.8125") Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	69 in	✓ Secondary source only	Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 69 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Height to top of cabinet 69" (1753 mm) Open original source ↗ Why this value was used Height to top of cabinet 69" (1753 mm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	70.0625 in	✓ Secondary source only	Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 70.0625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Height to top of hinges = 70-1/16 in. Open original source ↗ Why this value was used Height to top of hinges = 70-1/16 in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	29.875 in	✓ Secondary source only	Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 29.875 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Depth without doors 297/8" (758.8 mm) Open original source ↗ Why this value was used Depth without doors 297/8" (758.8 mm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	34.75 in	✓ Secondary source only	Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 34.75 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Depth with doors 343/4" (882.3 mm) Open original source ↗ Why this value was used Depth with doors 343/4" (882.3 mm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	36.8125 in	✓ Secondary source only	Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 36.8125 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Depth with door handle = 36-13/16 in. Open original source ↗ Why this value was used Depth with door handle = 36-13/16 in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	49 in	✓ Secondary source only	Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 49 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Depth with doors open 90° 49" (1245.2 mm) Open original source ↗ Why this value was used Depth with doors open 90° 49" (1245.2 mm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	36.8125 in	✓ Verified — exact model · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202505/dimension-guide-w11770689-revb.pdf Whirlpool	Retained specification excerpt: Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 35.8
Value used by ExactFit 36.8125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: 35.8125 + 2 * 0.5 Confidence label: medium. Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202505/dimension-guide-w11770689-revb.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 35.8 Reviewed: 2026-09-04 Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 35.8125 + 2 * 0.5 = 36.8125 in Open original source ↗ Why this value was used Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 35.8125 + 2 * 0.5 = 36.8125 in Calculation or inference: 35.8125 + 2 * 0.5. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	70.5625 in	✓ Secondary source only · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf Whirlpool	Page 7
Value used by ExactFit 70.5625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf Whirlpool · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-05 Minimum opening height derived from highest stored appliance endpoint 70.0625 in plus documented top clearance 0.5 in. Open original source ↗ Why this value was used Minimum opening height derived from highest stored appliance endpoint 70.0625 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	31.875 in	✓ Secondary source only · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf Whirlpool	Page 7
Value used by ExactFit 31.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf Whirlpool · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-05 Minimum opening depth derived from case-only depth 29.875 in plus documented rear clearance 2.0 in. Open original source ↗ Why this value was used Minimum opening depth derived from case-only depth 29.875 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	0.5 in	✓ Verified — exact model · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf Whirlpool	Page 7
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRFF3736SV Confidence label: medium. Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-05 1/2" of space on each side Open original source ↗ Why this value was used 1/2" of space on each side Calculation or inference: documented DOE model pattern WRFF3736SV. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	0.5 in	✓ Verified — exact model · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf Whirlpool	Page 7
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRFF3736SV Confidence label: medium. Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-05 1/2" of space on each side Open original source ↗ Why this value was used 1/2" of space on each side Calculation or inference: documented DOE model pattern WRFF3736SV. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	0.5 in	✓ Verified — exact model · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf Whirlpool	Page 7
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRFF3736SV Confidence label: medium. Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-05 1/2" of space on each side and 1/2ʺ at the top Open original source ↗ Why this value was used 1/2" of space on each side and 1/2ʺ at the top Calculation or inference: documented DOE model pattern WRFF3736SV. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	2 in	✓ Verified — exact model · Calculated/inferred	Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf Whirlpool	Page 7
Value used by ExactFit 2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRFF3736SV Confidence label: medium. Primary evidence Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202506/owners-manual-w11767765-reva.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-05 2" of space behind Open original source ↗ Why this value was used 2" of space behind Calculation or inference: documented DOE model pattern WRFF3736SV. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	3.75 in	✓ Verified — equivalent model · Calculated/inferred	KitchenAid KRFF336SPS Owner's Manual assets.skulytics.io	Page 7
Value used by ExactFit 3.75 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidence KitchenAid KRFF336SPS Owner's Manual assets.skulytics.io · Owner's Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-05 next to a fixed wall, leave a 3 3/4" (9.5 cm Open original source ↗ Why this value was used next to a fixed wall, leave a 3 3/4" (9.5 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from KRFF336SPS applies Target model: WRFF3736SV. Supporting model: KRFF336SPS. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: next to a fixed wall, leave a 3 3/4" (9.5 cm. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	35.8125 in	✓ Secondary source only	Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 35.8125 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRFF3736SV Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Cabinet width 3513/16" (909 mm) Open original source ↗ Why this value was used Cabinet width 3513/16" (909 mm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	Unknown	? Not found	Whirlpool WRFF3536SV Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit Unknown · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRFF3536SV Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Not established Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Use documented 1/2 in per-side ventilation clearance; 3 3/4 in is a separate fixed-wall door-access condition. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found 3.75 in — superseded https://www.whirlpool.com/content/dam/global/documents/202505/dimension-guide-w11770689-revb.pdf; location not retained. Model scope: not separately recorded. Raw value: Official family dimension guide: next to a fixed wall, leave a minimum 3 3/4 in between refrigerator and wall. The final reviewed registry supersedes this earlier audit value. Use documented 1/2 in per-side ventilation clearance; 3 3/4 in is a separate fixed-wall door-access condition. Open alternative source ↗ Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Conflicting published measurements

Adjoining-wall clearance (reviewed endpoint)

Selected: Unknown. Earlier retained values: 3.75 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

View source scope, location, and impact on fit

Measurements not established

Adjoining-wall clearance (reviewed endpoint)

Not found for safe fit use. Sources retained: 105602130.pdf. Related-model record: WRFF3536SV.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Source documents and pages

Whirlpool WRFF3736SV Dimension Guide

assets.skulytics.io · Dimension Guide · secondary model/source

Model numbers covered: WRFF3736SV. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

8 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Cabinet case width.