This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-09-05. 5 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
Measurements and supporting evidence
Measurement
Value used
Evidence status
Primary source
Location
Details
Overall width
24 in
✓ Secondary source only
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com
Retained specification excerpt: net Width = 24.0 in | in. | | Height | 71 in. | | Length | 27.81 in. | | Weight | 160.5 lbs. | | Ca
Value used by ExactFit
24 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: net Width = 24.0 in | in. | | Height | 71 in. | | Length | 27.81 in. | | Weight | 160.5 lbs. | | Ca Reviewed: 2026-09-04
net Width = 24.0 in | in. | | Height | 71 in. | | Length | 27.81 in. | | Weight | 160.5 lbs. | | Cabinet Width | 24 in | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | cached support: appliancehomestore.com, canadianappliance.ca
net Width = 24.0 in | in. | | Height | 71 in. | | Length | 27.81 in. | | Weight | 160.5 lbs. | | Cabinet Width | 24 in | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | cached support: appliancehomestore.com, canadianappliance.ca
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com
Retained specification excerpt: Height To Top Of Cabinet = 68.5 in | | | Depth Closed Including Handles | 27.813 in | | Gross Weight
Value used by ExactFit
68.5 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Height To Top Of Cabinet = 68.5 in | | | Depth Closed Including Handles | 27.813 in | | Gross Weight Reviewed: 2026-09-04
Height To Top Of Cabinet = 68.5 in | | | Depth Closed Including Handles | 27.813 in | | Gross Weight | 160.5 lbs | | Height To Top Of Cabinet | 68.5 in | | Net Weight | 154.8 lbs | Number of Boxes, Shipping Dimensions, & Shipping W | independent cached support: appliancehomestore.com, canadianappliance.ca
Height To Top Of Cabinet = 68.5 in | | | Depth Closed Including Handles | 27.813 in | | Gross Weight | 160.5 lbs | | Height To Top Of Cabinet | 68.5 in | | Net Weight | 154.8 lbs | Number of Boxes, Shipping Dimensions, & Shipping W | independent cached support: appliancehomestore.com, canadianappliance.ca
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com
Retained specification excerpt: Height To Top Of Door Hinge = 71.0 in | | Depth Excluding Doors | 24 in | | Depth With Door Open 90
Value used by ExactFit
71 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Height To Top Of Door Hinge = 71.0 in | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Reviewed: 2026-09-04
Height To Top Of Door Hinge = 71.0 in | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Height To Top Of Door Hinge | 71 in | | Depth Closed Excluding Handles | 27.813 in | | Depth Closed Including Handl | independent cached support: appliancehomestore.com, canadianappliance.ca
Height To Top Of Door Hinge = 71.0 in | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Height To Top Of Door Hinge | 71 in | | Depth Closed Excluding Handles | 27.813 in | | Depth Closed Including Handl | independent cached support: appliancehomestore.com, canadianappliance.ca
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com
Retained specification excerpt: Depth Excluding Doors = 24.0 in | n. | | Length | 27.81 in. | | Weight | 160.5 lbs. | | Cabinet Widt
Value used by ExactFit
24 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Excluding Doors = 24.0 in | n. | | Length | 27.81 in. | | Weight | 160.5 lbs. | | Cabinet Widt Reviewed: 2026-09-04
Depth Excluding Doors = 24.0 in | n. | | Length | 27.81 in. | | Weight | 160.5 lbs. | | Cabinet Width | 24 in | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Height To Top Of Door Hinge | 71 | cached support: appliancehomestore.com, canadianappliance.ca
Depth Excluding Doors = 24.0 in | n. | | Length | 27.81 in. | | Weight | 160.5 lbs. | | Cabinet Width | 24 in | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Height To Top Of Door Hinge | 71 | cached support: appliancehomestore.com, canadianappliance.ca
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com
Retained specification excerpt: Depth Closed Excluding Handles = 27.813 in | th With Door Open 90 Degree | 49 in | | Height To Top O
Value used by ExactFit
27.813 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Closed Excluding Handles = 27.813 in | th With Door Open 90 Degree | 49 in | | Height To Top O Reviewed: 2026-09-04
Depth Closed Excluding Handles = 27.813 in | th With Door Open 90 Degree | 49 in | | Height To Top Of Door Hinge | 71 in | | Depth Closed Excluding Handles | 27.813 in | | Depth Closed Including Handles | 27.813 in | | Gross Weight | 160.5 lbs | |
Depth Closed Excluding Handles = 27.813 in | th With Door Open 90 Degree | 49 in | | Height To Top Of Door Hinge | 71 in | | Depth Closed Excluding Handles | 27.813 in | | Depth Closed Including Handles | 27.813 in | | Gross Weight | 160.5 lbs | |
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com
Retained specification excerpt: Depth Closed Including Handles = 27.813 in | To Top Of Door Hinge | 71 in | | Depth Closed Excluding
Value used by ExactFit
27.813 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Closed Including Handles = 27.813 in | To Top Of Door Hinge | 71 in | | Depth Closed Excluding Reviewed: 2026-09-04
Depth Closed Including Handles = 27.813 in | To Top Of Door Hinge | 71 in | | Depth Closed Excluding Handles | 27.813 in | | Depth Closed Including Handles | 27.813 in | | Gross Weight | 160.5 lbs | | Height To Top Of Cabinet | 68.5 in | | Net Wei
Depth Closed Including Handles = 27.813 in | To Top Of Door Hinge | 71 in | | Depth Closed Excluding Handles | 27.813 in | | Depth Closed Including Handles | 27.813 in | | Gross Weight | 160.5 lbs | | Height To Top Of Cabinet | 68.5 in | | Net Wei
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com
Retained specification excerpt: dth | 24 in | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Height
Value used by ExactFit
49 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: dth | 24 in | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Height Reviewed: 2026-09-04
dth | 24 in | | Depth Excluding Doors | 24 in | | Depth With Door Open 90 Degree | 49 in | | Height To Top Of Door Hinge | 71 in | | Depth
25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: 24.0 + 2 * 0.5
Confidence label: medium.
Primary evidence
Whirlpool WRB533CZJW Owners Manual appliancehomestore.com · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-04
Minimum opening derived from exact product width plus explicit symmetric side spacing: 24.0 + 2 * 0.5 = 25.0 in. Side evidence: To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side
Minimum opening derived from exact product width plus explicit symmetric side spacing: 24.0 + 2 * 0.5 = 25.0 in. Side evidence: To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side Calculation or inference: 24.0 + 2 * 0.5.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Whirlpool opening envelope: max(68.5, 71.0) + 1.5 = 72.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Minimum opening depth derived from case-only depth 24.0 in plus documented rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRB533CZJ***
Confidence label: high.
Primary evidence
Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202002/dimension-guide-w11440352.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
1/2" space on each side Calculation or inference: documented DOE model pattern WRB533CZJ***.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRB533CZJ***
Confidence label: high.
Primary evidence
Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202002/dimension-guide-w11440352.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
1/2" space on each side Calculation or inference: documented DOE model pattern WRB533CZJ***.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Whirlpool WRB533CZJW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser
Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. To ensure proper ventilation for your refrigerator, it is recommended to allow a 1/2" (1.27 cm) space on each side. Allow 1 1/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall (consider the condenser
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern WRB533CZJ***
Confidence label: medium.
Primary evidence
Whirlpool measurement source — https://www.whirlpool.com/content/dam/global/documents/202002/dimension-guide-w11440352.pdf Whirlpool · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
1" at the back Calculation or inference: documented DOE model pattern WRB533CZJ***.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRB533CZJW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
space at the back for the water line connections. | If you are installing your refrigerator next to a fixed wall, leave 2 1/4 (5.7 cm) on the hinge side | to allow the door to swing open.
space at the back for the water line connections. | If you are installing your refrigerator next to a fixed wall, leave 2 1/4 (5.7 cm) on the hinge side | to allow the door to swing open.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc appliancehomestore.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: | Length | 27.81 in. | | Weight | 160.5 lbs. | | Cabinet Width | 24 in | | Depth Excluding Doors | 2 Reviewed: 2026-09-04
| Length | 27.81 in. | | Weight | 160.5 lbs. | | Cabinet Width | 24 in | | Depth Excluding Doors | 24 in | | Depth With
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Whirlpool WRB533CZJW Owners Manual assets.skulytics.io · Owners Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-04
To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side
To ensure proper ventilation for your refrigerator, it is | recommended to allow a 1/2" (1.25 cm) space on each side. | Allow 1 1/2" (3.81 cm) of space between overhead cabinets and | deterministic pattern: space_each_side
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Whirlpool WRB533CZJW Bottom Freezer Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source · secondary model/source
Model numbers covered: WRB533CZJW. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
8 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.