Measurement evidence for Whirlpool WRB329DMBB

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Whirlpool WRB329DMBB fit check Check this model against your opening How ExactFit verifies measurements

Whirlpool WRB329DMBB

Bottom Freezer · Standard-depth
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Incomplete evidence

0exact-model manufacturer values

2verified equivalent/same-chassis values

10secondary-source-only values

4values with unresolved source details

Last reviewed: 2026-09-05. 6 retained source records. 0 unresolved conflicts. Not every fit-critical input is supported.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

ExactFit does not have sufficient evidence for every fit-critical measurement. The fit checker will return Uncertain unless a known measurement already proves that the model does not fit.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	29.625 in	✓ Secondary source only	Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 29.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 H x W x D) 67" x 29-5/8" x 33-3/8" Open original source ↗ Why this value was used H x W x D) 67" x 29-5/8" x 33-3/8" Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	65.5 in	✓ Conflicting sources — resolved	Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 65.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Popular-brand audit: exact endpoint for height_case_in is 65.5 in; replaces 67.0 in. Open original source ↗ Why this value was used Popular-brand audit: exact endpoint for height_case_in is 65.5 in; replaces 67.0 in. Other evidence found 67 in — superseded 105519256.pdf; page 1. Model scope: not separately recorded. Raw value: H x W x D) 67" x 29-5/8" x 33-3/8". The final reviewed registry supersedes this earlier audit value. Popular-brand audit: exact endpoint for height_case_in is 65.5 in; replaces 67.0 in. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	67 in	✓ Secondary source only	Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 67 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 H x W x D) 67" x 29-5/8" x 33-3/8" Open original source ↗ Why this value was used H x W x D) 67" x 29-5/8" x 33-3/8" Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	28.13 in	✓ Secondary source only	Whirlpool 30 in. 18.7 cu. ft. Bottom Freezer Refrigerator ... www.pcrichard.com	Retained specification excerpt: Depth Without Door = 28.13 in \| frigerator ... Width: 30 in \| Depth: 34 in \| Height: 67 in Quick … 3
Value used by ExactFit 28.13 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool 30 in. 18.7 cu. ft. Bottom Freezer Refrigerator ... www.pcrichard.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Without Door = 28.13 in \| frigerator ... Width: 30 in \| Depth: 34 in \| Height: 67 in Quick … 3 Reviewed: 2026-09-04 Depth Without Door = 28.13 in \| frigerator ... Width: 30 in \| Depth: 34 in \| Height: 67 in Quick … 33.38 Inches Depth Without Door (in.) 28.13 Inches Depth With Door Open (in.) 59 Inches Depth with Bump-Outs Open original source ↗ Why this value was used Depth Without Door = 28.13 in \| frigerator ... Width: 30 in \| Depth: 34 in \| Height: 67 in Quick … 33.38 Inches Depth Without Door (in.) 28.13 Inches Depth With Door Open (in.) 59 Inches Depth with Bump-Outs Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	30.875 in	✓ Conflicting sources — resolved	Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 30.875 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Popular-brand audit: exact endpoint for depth_less_handles_in is 30.875 in; replaces 33.375 in. Open original source ↗ Why this value was used Popular-brand audit: exact endpoint for depth_less_handles_in is 30.875 in; replaces 33.375 in. Other evidence found 33.375 in — superseded 105519256.pdf; page 1. Model scope: not separately recorded. Raw value: H x W x D) 67" x 29-5/8" x 33-3/8". The final reviewed registry supersedes this earlier audit value. Popular-brand audit: exact endpoint for depth_less_handles_in is 30.875 in; replaces 33.375 in. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	33.375 in	✓ Secondary source only	Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 33.375 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 H x W x D) 67" x 29-5/8" x 33-3/8" Open original source ↗ Why this value was used H x W x D) 67" x 29-5/8" x 33-3/8" Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	59 in	✓ Secondary source only	Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 59 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Depth with Door Open 90° 59" Open original source ↗ Why this value was used Depth with Door Open 90° 59" Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	Unknown	? Not found · Calculated/inferred	30-inches wide Bottom-Freezer Refrigerator with SpillGuard™ Glass Shelves - 18.7 cu. ft. Monochromatic Stainless Steel WRB329DMBM \| Whirlpool Whirlpool	Retained specification excerpt: Sibling-chassis propagation from WRB329DMBM, WRB329DMBW; model codes have the same numeric skeleton,
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: same-chassis variant propagation from WRB329DMBM, WRB329DMBW Confidence label: high. Primary evidence 30-inches wide Bottom-Freezer Refrigerator with SpillGuard™ Glass Shelves - 18.7 cu. ft. Monochromatic Stainless Steel WRB329DMBM \| Whirlpool Whirlpool · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Sibling-chassis propagation from WRB329DMBM, WRB329DMBW; model codes have the same numeric skeleton, Reviewed: 2026-09-04 Sibling-chassis propagation from WRB329DMBM, WRB329DMBW; model codes have the same numeric skeleton, at least four existing chassis dimensions match, and no structural dimensions conflict. Sibling evidence: Cutout Width: 30.0 in \| # Dimensions Cabinet Width 29.625 in Capacity 18.67 cu. ft. Cutout Height 67 in Cutout Width 30 in Depth 33.375 in Depth Closed Excluding Handles 30.875 in Depth Closed Including Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 30 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	67 in	✓ Secondary source only	Whirlpool WRB329DMBB 30-inches wide Bottom-Freezer ... ktappliance.com	Retained specification excerpt: Cutout Height 67 in
Value used by ExactFit 67 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRB329DMBB 30-inches wide Bottom-Freezer ... ktappliance.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Cutout Height 67 in Reviewed: 2026-09-05 Cutout Height 67 in Open original source ↗ Why this value was used Cutout Height 67 in Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	Unknown	? Not found · Calculated/inferred	Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com	Retained specification excerpt: Minimum opening depth derived from case-only depth 28.13 in plus propagated rear clearance 1.0 in.
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Minimum opening depth derived from case-only depth 28.13 in plus propagated rear clearance 1.0 in. Reviewed: 2026-09-05 Minimum opening depth derived from case-only depth 28.13 in plus propagated rear clearance 1.0 in. Open original source ↗ Why this value was used A required calculation input lacks defensible evidence. Retained research value: 29.13 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	0.5 in	✓ Verified — equivalent model · Calculated/inferred	Maytag MBF1958FEZ Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidence Maytag MBF1958FEZ Owners Manual assets.skulytics.io · Owners Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 1.25 cm) of space on each side Open original source ↗ Why this value was used 1.25 cm) of space on each side Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from MBF1958FEZ applies Target model: WRB329DMBB. Supporting model: MBF1958FEZ. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Left-side ventilation clearance. Relevant equivalence evidence: 1.25 cm) of space on each side. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	0.5 in	✓ Verified — equivalent model · Calculated/inferred	Maytag MBF1958FEZ Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidence Maytag MBF1958FEZ Owners Manual assets.skulytics.io · Owners Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 1.25 cm) of space on each side Open original source ↗ Why this value was used 1.25 cm) of space on each side Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from MBF1958FEZ applies Target model: WRB329DMBB. Supporting model: MBF1958FEZ. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Right-side ventilation clearance. Relevant equivalence evidence: 1.25 cm) of space on each side. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	Unknown	? Not found · Calculated/inferred	Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com	Retained specification excerpt: Conflict-free 5-character model-series consensus (WRB32) from 2 directly evidenced models; example W
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: model-series prefix WRB32; 2 direct seeds; unanimous value 0.5 Confidence label: medium. Primary evidence Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Conflict-free 5-character model-series consensus (WRB32) from 2 directly evidenced models; example W Reviewed: 2026-09-05 Conflict-free 5-character model-series consensus (WRB32) from 2 directly evidenced models; example Whirlpool WRB322DMBB: Top: 1/2" Open original source ↗ Why this value was used A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	Unknown	? Not found · Calculated/inferred	Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com	Retained specification excerpt: Conflict-free 5-character model-series consensus (WRB32) from 2 directly evidenced models; example W
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: model-series prefix WRB32; 2 direct seeds; unanimous value 1.0 Confidence label: medium. Primary evidence Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: Conflict-free 5-character model-series consensus (WRB32) from 2 directly evidenced models; example W Reviewed: 2026-09-05 Conflict-free 5-character model-series consensus (WRB32) from 2 directly evidenced models; example Whirlpool WRB322DMBB: Back: 1" Open original source ↗ Why this value was used A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 1 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	2.5 in	✓ Verified — equivalent model · Calculated/inferred	Maytag MBF1958FEZ Owners Manual assets.skulytics.io	Page 5
Value used by ExactFit 2.5 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidence Maytag MBF1958FEZ Owners Manual assets.skulytics.io · Owners Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 5 Reviewed: 2026-09-05 next to a fixed wall, leave 21/2" (6.3 cm Open original source ↗ Why this value was used next to a fixed wall, leave 21/2" (6.3 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from MBF1958FEZ applies Target model: WRB329DMBB. Supporting model: MBF1958FEZ. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: next to a fixed wall, leave 21/2" (6.3 cm. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	29.625 in	✓ Secondary source only	Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 29.625 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 H x W x D) 67" x 29-5/8" x 33-3/8" Open original source ↗ Why this value was used H x W x D) 67" x 29-5/8" x 33-3/8" Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	0.5 in	✓ Secondary source only	Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 0.5 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB329DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Cutout dimensions allow extra 1/2 in. on sides. Open original source ↗ Why this value was used Cutout dimensions allow extra 1/2 in. on sides. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Conflicting published measurements

Cabinet height

Selected: 65.5 in. Earlier retained values: 67 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Popular-brand audit: exact endpoint for height_case_in is 65.5 in; replaces 67.0 in.

View source scope, location, and impact on fit

Depth with door, without handles

Selected: 30.875 in. Earlier retained values: 33.375 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Popular-brand audit: exact endpoint for depth_less_handles_in is 30.875 in; replaces 33.375 in.

View source scope, location, and impact on fit

Measurements not established

Minimum cutout width

Not found for safe fit use. Sources retained: https://www.whirlpool.com/kitchen/refrigeration/refrigerators/bottom-freezer/p.30-inches-wide-bottom-freezer-refrigerator-with-spillguard-glass-shelves-18.7-cu.-ft.wrb329dmbm.html. Related-model record: WRB329DMBB.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Minimum cutout depth

Not found for safe fit use. Sources retained: https://www.ajmadison.com/cgi-bin/ajmadison/WRB322DMBB.html. Related-model record: WRB329DMBB.

A required calculation input lacks defensible evidence.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Top clearance

Not found for safe fit use. Sources retained: https://www.ajmadison.com/cgi-bin/ajmadison/WRB322DMBB.html. Related-model record: WRB329DMBB.

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Rear clearance

Not found for safe fit use. Sources retained: https://www.ajmadison.com/cgi-bin/ajmadison/WRB322DMBB.html. Related-model record: WRB329DMBB.

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Source documents and pages

Whirlpool WRB329DMBB Feature Sheet

assets.skulytics.io · Feature Sheet · secondary model/source

Model numbers covered: WRB329DMBB. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

8 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).