Measurement evidence for Whirlpool WRB322DMBW

Value used by ExactFit

32.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRB322DMBW Feature Sheet
assets.skulytics.io · Feature Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

H x W x D) 70" x 32-5/8" x 33-3/8"

Why this value was used

H x W x D) 70" x 32-5/8" x 33-3/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRB322DMBW Feature Sheet
assets.skulytics.io · Feature Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Popular-brand audit: exact endpoint for height_case_in is 68.5 in; replaces 70.0 in.

Why this value was used

Popular-brand audit: exact endpoint for height_case_in is 68.5 in; replaces 70.0 in.

Other evidence found

• 70 in — superseded

  105517247.pdf; page 1. Model scope: not separately recorded. Raw value: H x W x D) 70" x 32-5/8" x 33-3/8". The final reviewed registry supersedes this earlier audit value. Popular-brand audit: exact endpoint for height_case_in is 68.5 in; replaces 70.0 in.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRB322DMBW Feature Sheet
assets.skulytics.io · Feature Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

H x W x D) 70" x 32-5/8" x 33-3/8"

Why this value was used

H x W x D) 70" x 32-5/8" x 33-3/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool WRB322DMBW 33 Inch Bottom-Freezer Refrigerator with FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, SpillGuard Glass Shelves, Humidity Controlled Crispers, LED Lighting, Ice Maker and Energy Star Rated: White
www.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: reviewed cached consensus: Depth without Door = 28.125 in | Total Capacity: 22.07 Cu. Ft. Dimension
Reviewed: 2026-09-04

reviewed cached consensus: Depth without Door = 28.125 in | Total Capacity: 22.07 Cu. Ft. Dimensions Width: 32 5/8 Inch Depth: 33 3/8 Inch Depth without Door: 28 1/8 Inch Depth without Handles: 30 7/8 Inch Depth with Door at 90°: 62 Inch Height: 70 | supporting domains: ajmadison.com, reisappliance.ca

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 28.125 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

30.875 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRB322DMBW Feature Sheet
assets.skulytics.io · Feature Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Popular-brand audit: exact endpoint for depth_less_handles_in is 30.875 in; replaces 33.375 in.

Why this value was used

Popular-brand audit: exact endpoint for depth_less_handles_in is 30.875 in; replaces 33.375 in.

Other evidence found

• 33.375 in — superseded

  105517247.pdf; page 1. Model scope: not separately recorded. Raw value: H x W x D) 70" x 32-5/8" x 33-3/8". The final reviewed registry supersedes this earlier audit value. Popular-brand audit: exact endpoint for depth_less_handles_in is 30.875 in; replaces 33.375 in.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.375 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRB322DMBW Feature Sheet
assets.skulytics.io · Feature Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

H x W x D) 70" x 32-5/8" x 33-3/8"

Why this value was used

H x W x D) 70" x 32-5/8" x 33-3/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

62 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRB322DMBW Feature Sheet
assets.skulytics.io · Feature Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Depth with Door Open 90° 62"

Why this value was used

Depth with Door Open 90° 62"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool WRB322DMBW 33 Inch Bottom-Freezer Refrigerator with FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, SpillGuard Glass Shelves, Humidity Controlled Crispers, LED Lighting, Ice Maker and Energy Star Rated: White
www.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: reviewed cached consensus: Cutout Width = 33.0 in | th with Door at 90°: 62 Inch Height: 70 Inch Hei
Reviewed: 2026-09-04

reviewed cached consensus: Cutout Width = 33.0 in | th with Door at 90°: 62 Inch Height: 70 Inch Height without Hinges: 68 1/2 Inch Cutout Width: 33 Inch Cutout Height: 69 Inch Cabinet Depth: 28 1/8 Inch Shabbos Compliance Sabbath | supporting domains: ajmadison.com, reisappliance.ca

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 33 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Whirlpool WRB322DMBW 33 Inch Bottom-Freezer Refrigerator with FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, SpillGuard Glass Shelves, Humidity Controlled Crispers, LED Lighting, Ice Maker and Energy Star Rated: White
www.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 70.0 in plus documented top clearance
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 70.0 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 70.0 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Whirlpool WRB322DMBW 33 Inch Bottom-Freezer Refrigerator with FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, SpillGuard Glass Shelves, Humidity Controlled Crispers, LED Lighting, Ice Maker and Energy Star Rated: White
www.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening depth derived from case-only depth 28.125 in plus documented rear clearance 1.0 in.
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 28.125 in plus documented rear clearance 1.0 in.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 29.125 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Amana ABB1924BRB Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 6
Reviewed: 2026-09-05

1.25 cm) of space on each side

Why this value was used

1.25 cm) of space on each side Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Amana ABB1924BRB Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 6
Reviewed: 2026-09-05

1.25 cm) of space on each side

Why this value was used

1.25 cm) of space on each side Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool WRB322DMBW 33 Inch Bottom-Freezer Refrigerator with FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, SpillGuard Glass Shelves, Humidity Controlled Crispers, LED Lighting, Ice Maker and Energy Star Rated: White
www.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Top: 1/2"
Reviewed: 2026-09-05

Top: 1/2"

Why this value was used

Top: 1/2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Whirlpool WRB322DMBW 33 Inch Bottom-Freezer Refrigerator with FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, SpillGuard Glass Shelves, Humidity Controlled Crispers, LED Lighting, Ice Maker and Energy Star Rated: White
www.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Back: 1"
Reviewed: 2026-09-05

Back: 1"

Why this value was used

Back: 1"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.48 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool measurement source — https://assets.ajmadison.com/ajmadison/itemdocs/wrb322dmb_specs_sheet.pdf
assets.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

the back for the water line connections. | If you are installing your refrigerator next to a fixed wall, leave 21/2" (6.3 cm) minimum | on the hinge side (depending on your model) to allow for the door to swing open.

Why this value was used

the back for the water line connections. | If you are installing your refrigerator next to a fixed wall, leave 21/2" (6.3 cm) minimum | on the hinge side (depending on your model) to allow for the door to swing open.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.625 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRB322DMBW Feature Sheet
assets.skulytics.io · Feature Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

H x W x D) 70" x 32-5/8" x 33-3/8"

Why this value was used

H x W x D) 70" x 32-5/8" x 33-3/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

0.5 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Whirlpool WRB322DMBW Feature Sheet
assets.skulytics.io · Feature Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Cutout dimensions allow extra 1/2 in. on sides.

Why this value was used

Cutout dimensions allow extra 1/2 in. on sides.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.