Measurement evidence for Whirlpool WRB322DMBB

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Whirlpool WRB322DMBB fit check Check this model against your opening How ExactFit verifies measurements

Whirlpool WRB322DMBB

Bottom Freezer · Standard-depth
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Complete mixed evidence

0exact-model manufacturer values

1verified equivalent/same-chassis values

13secondary-source-only values

2values with unresolved source details

Last reviewed: 2026-09-05. 5 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	32.625 in	✓ Secondary source only	Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 32.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 H x W x D) 70" x 32-5/8" x 33-3/8" Open original source ↗ Why this value was used H x W x D) 70" x 32-5/8" x 33-3/8" Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	68.5 in	✓ Conflicting sources — resolved	Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 68.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Popular-brand audit: exact endpoint for height_case_in is 68.5 in; replaces 70.0 in. Open original source ↗ Why this value was used Popular-brand audit: exact endpoint for height_case_in is 68.5 in; replaces 70.0 in. Other evidence found 70 in — superseded 105517210.pdf; page 1. Model scope: not separately recorded. Raw value: H x W x D) 70" x 32-5/8" x 33-3/8". The final reviewed registry supersedes this earlier audit value. Popular-brand audit: exact endpoint for height_case_in is 68.5 in; replaces 70.0 in. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	70 in	✓ Secondary source only	Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 70 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 H x W x D) 70" x 32-5/8" x 33-3/8" Open original source ↗ Why this value was used H x W x D) 70" x 32-5/8" x 33-3/8" Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	28.125 in	✓ Secondary source only	Whirlpool Refrigerators WRB322DMBB (Bottom Freezer) from Harris Lumber & Hardware www.harrisappliances.com	Retained specification excerpt: Depth Excluding Doors = 28.125 in \| Depth (With Handles) \| 33.37 inch(es) / 84.77 cm \|. \| Additional
Value used by ExactFit 28.125 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool Refrigerators WRB322DMBB (Bottom Freezer) from Harris Lumber & Hardware www.harrisappliances.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Excluding Doors = 28.125 in \| Depth (With Handles) \| 33.37 inch(es) / 84.77 cm \|. \| Additional Reviewed: 2026-09-04 Depth Excluding Doors = 28.125 in \| Depth (With Handles) \| 33.37 inch(es) / 84.77 cm \|. \| Additional Dimensions \| • Depth Excluding Doors: 71.44 cm, 28-1/8 in • Depth With Door Open 90 Degrees: 157.48 cm, 62.0 in • Height To To \| cached support: harrisappliances.com, marocky.ca Open original source ↗ Why this value was used Depth Excluding Doors = 28.125 in \| Depth (With Handles) \| 33.37 inch(es) / 84.77 cm \|. \| Additional Dimensions \| • Depth Excluding Doors: 71.44 cm, 28-1/8 in • Depth With Door Open 90 Degrees: 157.48 cm, 62.0 in • Height To To \| cached support: harrisappliances.com, marocky.ca Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	30.875 in	✓ Conflicting sources — resolved	Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 30.875 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Popular-brand audit: exact endpoint for depth_less_handles_in is 30.875 in; replaces 33.375 in. Open original source ↗ Why this value was used Popular-brand audit: exact endpoint for depth_less_handles_in is 30.875 in; replaces 33.375 in. Other evidence found 33.375 in — superseded 105517210.pdf; page 1. Model scope: not separately recorded. Raw value: H x W x D) 70" x 32-5/8" x 33-3/8". The final reviewed registry supersedes this earlier audit value. Popular-brand audit: exact endpoint for depth_less_handles_in is 30.875 in; replaces 33.375 in. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	33.375 in	✓ Secondary source only	Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 33.375 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 H x W x D) 70" x 32-5/8" x 33-3/8" Open original source ↗ Why this value was used H x W x D) 70" x 32-5/8" x 33-3/8" Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	62 in	✓ Secondary source only	Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 62 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Depth with Door Open 90° 62" Open original source ↗ Why this value was used Depth with Door Open 90° 62" Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	Unknown	? Not found	Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com	Retained specification excerpt: reviewed cached consensus: Cutout Width = 33.0 in \| th with Door at 90°: 62 Inch Height: 70 Inch Hei
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com · Web source Model scope: Not established Publication/revision date: Not recorded Location: Retained specification excerpt: reviewed cached consensus: Cutout Width = 33.0 in \| th with Door at 90°: 62 Inch Height: 70 Inch Hei Reviewed: 2026-09-04 reviewed cached consensus: Cutout Width = 33.0 in \| th with Door at 90°: 62 Inch Height: 70 Inch Height without Hinges: 68 1/2 Inch Cutout Width: 33 Inch Cutout Height: 69 Inch Cabinet Depth: 28 1/8 Inch Shabbos Compliance Sabbath \| supporting domains: ajmadison.com, appliancehomestore.com, slymanbros.com Open original source ↗ Why this value was used A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement. Retained research value: 33 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	70.5 in	✓ Secondary source only · Calculated/inferred	Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com	Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 70.0 in plus documented top clearance
Value used by ExactFit 70.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 70.0 in plus documented top clearance Reviewed: 2026-09-05 Minimum opening height derived from highest appliance endpoint 70.0 in plus documented top clearance 0.5 in. Open original source ↗ Why this value was used Minimum opening height derived from highest appliance endpoint 70.0 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	29.125 in	✓ Secondary source only · Calculated/inferred	Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com	Retained specification excerpt: Minimum opening depth derived from case-only depth 28.125 in plus documented rear clearance 1.0 in.
Value used by ExactFit 29.125 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Minimum opening depth derived from case-only depth 28.125 in plus documented rear clearance 1.0 in. Reviewed: 2026-09-05 Minimum opening depth derived from case-only depth 28.125 in plus documented rear clearance 1.0 in. Open original source ↗ Why this value was used Minimum opening depth derived from case-only depth 28.125 in plus documented rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	0.5 in	✓ Verified — equivalent model · Calculated/inferred	Amana ABB1924BRB Owners Manual assets.skulytics.io	Page 6
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidence Amana ABB1924BRB Owners Manual assets.skulytics.io · Owners Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 6 Reviewed: 2026-09-05 1.25 cm) of space on each side Open original source ↗ Why this value was used 1.25 cm) of space on each side Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from ABB1924BRB applies Target model: WRB322DMBB. Supporting model: ABB1924BRB. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Left-side ventilation clearance. Relevant equivalence evidence: 1.25 cm) of space on each side. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	0.5 in	✓ Verified — equivalent model · Calculated/inferred	Amana ABB1924BRB Owners Manual assets.skulytics.io	Page 6
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidence Amana ABB1924BRB Owners Manual assets.skulytics.io · Owners Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 6 Reviewed: 2026-09-05 1.25 cm) of space on each side Open original source ↗ Why this value was used 1.25 cm) of space on each side Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Why evidence from ABB1924BRB applies Target model: WRB322DMBB. Supporting model: ABB1924BRB. Manufacturer: Whirlpool. Product family and measurement relationship: cached document family mapping: generic_or_unscoped_shared_document. Measurement transferred: Right-side ventilation clearance. Relevant equivalence evidence: 1.25 cm) of space on each side. Known differences: not separately recorded. Review decision: local cached pdf native text; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	0.5 in	✓ Secondary source only	Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com	Retained specification excerpt: Top: 1/2"
Value used by ExactFit 0.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Top: 1/2" Reviewed: 2026-09-05 Top: 1/2" Open original source ↗ Why this value was used Top: 1/2" Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	1 in	✓ Secondary source only	Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com	Retained specification excerpt: Back: 1"
Value used by ExactFit 1 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Whirlpool WRB322DMBB 33 Inch Freestanding Bottom-Freezer Refrigerator with SpillGuard Glass Shelves, Humidity Controlled Crispers, FreshFlow Preserver, Accu-Chill System, Adaptive Defrost, LED Lighting, Ice Maker and ENERGY STAR®: Black www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Back: 1" Reviewed: 2026-09-05 Back: 1" Open original source ↗ Why this value was used Back: 1" Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	Unknown	? Not found · Calculated/inferred	Whirlpool measurement source — https://assets.ajmadison.com/ajmadison/itemdocs/wrb322dmb_specs_sheet.pdf assets.ajmadison.com	Page 1
Value used by ExactFit Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: identical 8-dimension chassis signature; propagated from WRB322DMBW Confidence label: medium. Primary evidence Whirlpool measurement source — https://assets.ajmadison.com/ajmadison/itemdocs/wrb322dmb_specs_sheet.pdf assets.ajmadison.com · Web source Model scope: Not established Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05 Conflict-free identical-chassis propagation from Whirlpool WRB322DMBW: hinge_side_wall_clearance_in=2.48 in. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 2.48 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	32.625 in	✓ Secondary source only	Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 32.625 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 H x W x D) 70" x 32-5/8" x 33-3/8" Open original source ↗ Why this value was used H x W x D) 70" x 32-5/8" x 33-3/8" Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	0.5 in	✓ Secondary source only	Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io	Page 1
Value used by ExactFit 0.5 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Whirlpool WRB322DMBB Feature Sheet assets.skulytics.io · Feature Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Cutout dimensions allow extra 1/2 in. on sides. Open original source ↗ Why this value was used Cutout dimensions allow extra 1/2 in. on sides. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Conflicting published measurements

Cabinet height

Selected: 68.5 in. Earlier retained values: 70 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Popular-brand audit: exact endpoint for height_case_in is 68.5 in; replaces 70.0 in.

View source scope, location, and impact on fit

Depth with door, without handles

Selected: 30.875 in. Earlier retained values: 33.375 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Popular-brand audit: exact endpoint for depth_less_handles_in is 30.875 in; replaces 33.375 in.

View source scope, location, and impact on fit

Measurements not established

Minimum cutout width

Not found for safe fit use. Sources retained: https://www.ajmadison.com/cgi-bin/ajmadison/WRB322DMBB.html. Related-model record: WRB322DMBB.

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Hinge-side wall clearance

Not found for safe fit use. Sources retained: https://assets.ajmadison.com/ajmadison/itemdocs/wrb322dmb_specs_sheet.pdf. Related-model record: WRB322DMBB.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Source documents and pages

Whirlpool WRB322DMBB Feature Sheet

assets.skulytics.io · Feature Sheet · secondary model/source

Model numbers covered: WRB322DMBB. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

8 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).