Measurement evidence for Midea MRT21D3BWW

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Midea MRT21D3BBB User Manual
assets.skulytics.io · User Manual
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-04

Exact-model or explicitly covered Midea dimensional source.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 29.7244 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

• 29.7 in — superseded

  https://www.midea.com/us/refrigerators/Top-Mount/midea-21-c-f-top-mount-refrigerator.mrt21d3bst; location not retained. Model scope: not separately recorded. Raw value: l Physical Dimensions Product Depth (in.) 32.7 in Product Width (in.) 29.7 in Product Height (in.) 66.6 in Product Weight (lbs). The final reviewed registry supersedes this earlier audit value. Exact-model or explicitly covered Midea dimensional source.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Midea MRT21D3BBB User Manual
assets.skulytics.io · User Manual
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-04

Exact-model or explicitly covered Midea dimensional source.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 66.6142 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Midea MRT21D3BBB User Manual
assets.skulytics.io · User Manual
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-04

Exact-model or explicitly covered Midea dimensional source.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 66.6142 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

• 66.6 in — superseded

  https://www.midea.com/us/refrigerators/Top-Mount/midea-21-c-f-top-mount-refrigerator.mrt21d3bst; location not retained. Model scope: not separately recorded. Raw value: t Depth (in.) 32.7 in Product Width (in.) 29.7 in Product Height (in.) 66.6 in Product Weight (lbs) 158.7 lbs Features [...] Fea. The final reviewed registry supersedes this earlier audit value. Exact-model or explicitly covered Midea dimensional source.

  Open alternative source ↗

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Midea MRT21D3BBB User Manual
assets.skulytics.io · User Manual
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-04

Exact-model or explicitly covered Midea dimensional source.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 28.8976 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

• 28.9 in — superseded

  https://www.ajmadison.com/cgi-bin/ajmadison/MRT21D3BWW.html; location not retained. Model scope: not separately recorded. Raw value: Cabinet Depth = 28.9 in | hts. Product Depth: 32 7/10". Product Width: 29 7/10". Product Height: 66 3/5". Cabinet Depth: 28 9/10". Product Weight . The final reviewed registry supersedes this earlier audit value. Exact-model or explicitly covered Midea dimensional source.

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Midea MRT21D3BBB User Manual
assets.skulytics.io · User Manual
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-04

Exact-model or explicitly covered Midea dimensional source.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 32.6772 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

• 32.7 in — superseded

  https://www.midea.com/content/dam/midea-aem/us/refrigerators/top-mount-refrigerators/mrt21d3bst/REF25-031-MRT21D3BST-SPEC-Sheet-030326.pdf; location not retained. Model scope: not separately recorded. Raw value: Overall depth 32.7 in and Handle Type: Pocket; no projecting handle. The final reviewed registry supersedes this earlier audit value. Exact-model or explicitly covered Midea dimensional source.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Midea MRT21D3BBB User Manual
assets.skulytics.io · User Manual
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-04

Exact-model or explicitly covered Midea dimensional source.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 32.6772 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

• 32.7 in — superseded

  https://www.midea.com/us/refrigerators/Top-Mount/midea-21-c-f-top-mount-refrigerator.mrt21d3bst; location not retained. Model scope: not separately recorded. Raw value: 6505236 Color Stainless Steel Physical Dimensions Product Depth (in.) 32.7 in Product Width (in.) 29.7 in Product Height (in.) . The final reviewed registry supersedes this earlier audit value. Exact-model or explicitly covered Midea dimensional source.

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 28.8976 + 29.7244

Confidence label: medium.

Primary evidence

Midea MRT21D3BBB User Manual
assets.skulytics.io · User Manual
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-04

Single-door 90-degree geometric envelope from exact A and C1 dimensions.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 58.622 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 29.7244 + 2 * 3.937

Confidence label: medium.

Primary evidence

Midea MRT21D3BBB User Manual
assets.skulytics.io · User Manual
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-04

Width plus documented >100 mm clearance on each side.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 37.5984 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Midea MRT21D3BBB User Manual
assets.skulytics.io · User Manual
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Minimum opening height is the verified highest appliance endpoint plus the documented top clearance.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 70.5517 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Midea MRT21D3BBB User Manual
assets.skulytics.io · User Manual
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Minimum opening depth is the verified cabinet depth plus the documented rear clearance.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 32.8351 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.9375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Midea MRU21C7BST

Confidence label: medium.

Primary evidence

Refrigerator MIDEA MRU21C7BST - User manual and instructions
www.notice-facile.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to Midea MRU21C7BST; original evidenc
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to Midea MRU21C7BST; original evidence: full-page adjudication=3.9375; parser candidates=[3.938, 0.0]; 100 mm of clearance at both sides

Why this value was used

Conflict-free corporate-family exact 8-dimension chassis match to Midea MRU21C7BST; original evidence: full-page adjudication=3.9375; parser candidates=[3.938, 0.0]; 100 mm of clearance at both sides Calculation or inference: exact 8-dimension chassis signature; source model Midea MRU21C7BST.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.9375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Midea MRU21C7BST

Confidence label: medium.

Primary evidence

Refrigerator MIDEA MRU21C7BST - User manual and instructions
www.notice-facile.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to Midea MRU21C7BST; original evidenc
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to Midea MRU21C7BST; original evidence: full-page adjudication=3.9375; parser candidates=[3.938, 0.0]; 100 mm of clearance at both sides

Why this value was used

Conflict-free corporate-family exact 8-dimension chassis match to Midea MRU21C7BST; original evidence: full-page adjudication=3.9375; parser candidates=[3.938, 0.0]; 100 mm of clearance at both sides Calculation or inference: exact 8-dimension chassis signature; source model Midea MRU21C7BST.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.9375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Midea MRT21D3BBB User Manual
assets.skulytics.io · User Manual
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Manufacturer family manual requires over 100 mm from each adjacent wall.

Why this value was used

Manufacturer family manual requires over 100 mm from each adjacent wall. Calculation or inference: cached documented shared chassis propagation.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.9375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Midea MRT21D3BBB User Manual
assets.skulytics.io · User Manual
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Manufacturer family manual requires over 100 mm from each adjacent wall.

Why this value was used

Manufacturer family manual requires over 100 mm from each adjacent wall. Calculation or inference: cached documented shared chassis propagation.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

3.937 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Midea MRT21D3BWW User Manual
assets.skulytics.io · User Manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

• Too small of a distance from adjacent items may result in the degradation of | freezing capability and increased electricity costs. Allow over 100 mm of clearance | from each adjacent wall when installing the appliance.

Why this value was used

• Too small of a distance from adjacent items may result in the degradation of | freezing capability and increased electricity costs. Allow over 100 mm of clearance | from each adjacent wall when installing the appliance.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Midea MRT21D3BBB User Manual
assets.skulytics.io · User Manual
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-04

Exact-model or explicitly covered Midea dimensional source.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 29.7244 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Midea MRT21D3BBB User Manual
assets.skulytics.io · User Manual
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-04

Exact-model or explicitly covered Midea dimensional source.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 3.937 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.