Measurement evidence for Midea MRT14D3BWW

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Midea MRT14D3BWW fit check Check this model against your opening How ExactFit verifies measurements

Midea MRT14D3BWW

Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Incomplete evidence

0exact-model manufacturer values

3verified equivalent/same-chassis values

1secondary-source-only values

12values with unresolved source details

Last reviewed: 2026-09-05. 2 retained source records. 0 unresolved conflicts. Not every fit-critical input is supported.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

ExactFit does not have sufficient evidence for every fit-critical measurement. The fit checker will return Uncertain unless a known measurement already proves that the model does not fit.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	Unknown	? Not found	Midea MRT14D2BST User Manual assets.skulytics.io	Page 8
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Not established Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-04 Exact-model or explicitly covered Midea dimensional source. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 27.5591 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found 27.5 in — superseded https://www.midea.com/us/refrigerators/Top-Mount/midea-counter-depth-top-freezer-refrigerator.mrt14d3bww; location not retained. Model scope: not separately recorded. Raw value: r White Physical Dimensions Product Depth 28.8 in Product Width 27.5 in Product Height 60.6 in Product Weight 139 lbs Fea. The final reviewed registry supersedes this earlier audit value. Exact-model or explicitly covered Midea dimensional source. Open alternative source ↗ Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	Unknown	? Not found	Midea MRT14D2BST User Manual assets.skulytics.io	Page 8
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Not established Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-04 Exact-model or explicitly covered Midea dimensional source. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 60.6299 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	Unknown	? Not found	Midea MRT14D2BST User Manual assets.skulytics.io	Page 8
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Not established Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-04 Exact-model or explicitly covered Midea dimensional source. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 60.6299 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found 1 in — superseded https://www.notice-facile.com/en/manual/1504029/midea+mrt14d3bww; location not retained. Model scope: not separately recorded. Raw value: overall height : C1 D E . The final reviewed registry supersedes this earlier audit value. Exact-model or explicitly covered Midea dimensional source. Open alternative source ↗ 60.6 in — superseded https://www.midea.com/us/refrigerators/Top-Mount/midea-counter-depth-top-freezer-refrigerator.mrt14d3bww; location not retained. Model scope: not separately recorded. Raw value: Product Height: 60.6 in \| 151 Color White Physical Dimensions Product Depth 28.8 in Product Width 27.5 in Product Height 60.6 in Product Weight 139 lbs Features [...] Features Capacity 14.2 cu. ft. Refrigerat. The final reviewed registry supersedes this earlier audit value. Exact-model or explicitly covered Midea dimensional source. Open alternative source ↗ Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	Unknown	? Not found	Midea MRT14D2BST User Manual assets.skulytics.io	Page 8
Value used by ExactFit Unknown · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Not established Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-04 Exact-model or explicitly covered Midea dimensional source. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 25.5906 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	Unknown	? Not found	Midea MRT14D2BST User Manual assets.skulytics.io	Page 8
Value used by ExactFit Unknown · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Not established Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-04 Exact-model or explicitly covered Midea dimensional source. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 28.7795 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	Unknown	? Not found	Midea MRT14D2BST User Manual assets.skulytics.io	Page 8
Value used by ExactFit Unknown · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Not established Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-04 Exact-model or explicitly covered Midea dimensional source. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 28.7795 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found 28.8 in — superseded https://www.midea.com/us/refrigerators/Top-Mount/midea-counter-depth-top-freezer-refrigerator.mrt14d3bww; location not retained. Model scope: not separately recorded. Raw value: UPC 840296505151 Color White Physical Dimensions Product Depth 28.8 in Product Width 27.5 in Product Height 60.6 in Prod. The final reviewed registry supersedes this earlier audit value. Exact-model or explicitly covered Midea dimensional source. Open alternative source ↗ Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	Unknown	? Not found · Calculated/inferred	Midea MRT14D2BST User Manual assets.skulytics.io	Page 8
Value used by ExactFit Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: 25.5906 + 27.5591 Confidence label: medium. Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Not established Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-04 Single-door 90-degree geometric envelope from exact A and C1 dimensions. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 53.1497 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	Unknown	? Not found · Calculated/inferred	Midea MRT14D2BST User Manual assets.skulytics.io	Page 7
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: 27.5591 + 2 * 3.937 Confidence label: medium. Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Not established Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-04 Width plus documented >100 mm clearance on each side. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 35.4331 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	Unknown	? Not found · Calculated/inferred	Midea MRT14D2BST User Manual assets.skulytics.io	Page 7
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Not established Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-05 Minimum opening height is the verified highest appliance endpoint plus the documented top clearance. Open original source ↗ Why this value was used A required calculation input lacks defensible evidence. Retained research value: 64.5669 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	Unknown	? Not found · Calculated/inferred	Midea MRT14D2BST User Manual assets.skulytics.io	Page 7
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Not established Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-05 Minimum opening depth is the verified cabinet depth plus the documented rear clearance. Open original source ↗ Why this value was used A required calculation input lacks defensible evidence. Retained research value: 29.5276 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	3.937 in	✓ Verified — equivalent model · Calculated/inferred	Midea MRT14D2BST User Manual assets.skulytics.io	Page 7
Value used by ExactFit 3.937 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-05 Manufacturer family manual requires over 100 mm from each adjacent wall. Open original source ↗ Why this value was used Manufacturer family manual requires over 100 mm from each adjacent wall. Calculation or inference: cached documented shared chassis propagation. Why evidence from MRT14D2BST applies Target model: MRT14D3BWW. Supporting model: MRT14D2BST. Manufacturer: Midea. Product family and measurement relationship: Manufacturer family manual requires over 100 mm from each adjacent wall.. Measurement transferred: Left-side ventilation clearance. Relevant equivalence evidence: Manufacturer family manual requires over 100 mm from each adjacent wall.. Known differences: not separately recorded. Review decision: cached documented shared chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	3.937 in	✓ Verified — equivalent model · Calculated/inferred	Midea MRT14D2BST User Manual assets.skulytics.io	Page 7
Value used by ExactFit 3.937 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-05 Manufacturer family manual requires over 100 mm from each adjacent wall. Open original source ↗ Why this value was used Manufacturer family manual requires over 100 mm from each adjacent wall. Calculation or inference: cached documented shared chassis propagation. Why evidence from MRT14D2BST applies Target model: MRT14D3BWW. Supporting model: MRT14D2BST. Manufacturer: Midea. Product family and measurement relationship: Manufacturer family manual requires over 100 mm from each adjacent wall.. Measurement transferred: Right-side ventilation clearance. Relevant equivalence evidence: Manufacturer family manual requires over 100 mm from each adjacent wall.. Known differences: not separately recorded. Review decision: cached documented shared chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	3.937 in	✓ Verified — equivalent model · Calculated/inferred	Midea MRT14D2BST User Manual assets.skulytics.io	Page 7
Value used by ExactFit 3.937 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-05 Manufacturer family manual requires over 100 mm from each adjacent wall. Open original source ↗ Why this value was used Manufacturer family manual requires over 100 mm from each adjacent wall. Calculation or inference: cached documented shared chassis propagation. Why evidence from MRT14D2BST applies Target model: MRT14D3BWW. Supporting model: MRT14D2BST. Manufacturer: Midea. Product family and measurement relationship: Manufacturer family manual requires over 100 mm from each adjacent wall.. Measurement transferred: Top clearance. Relevant equivalence evidence: Manufacturer family manual requires over 100 mm from each adjacent wall.. Known differences: not separately recorded. Review decision: cached documented shared chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	3.937 in	✓ Verified — equivalent model · Calculated/inferred	Midea MRT14D2BST User Manual assets.skulytics.io	Page 7
Value used by ExactFit 3.937 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-05 Manufacturer family manual requires over 100 mm from each adjacent wall. Open original source ↗ Why this value was used Manufacturer family manual requires over 100 mm from each adjacent wall. Calculation or inference: cached documented shared chassis propagation. Why evidence from MRT14D2BST applies Target model: MRT14D3BWW. Supporting model: MRT14D2BST. Manufacturer: Midea. Product family and measurement relationship: Manufacturer family manual requires over 100 mm from each adjacent wall.. Measurement transferred: Rear clearance. Relevant equivalence evidence: Manufacturer family manual requires over 100 mm from each adjacent wall.. Known differences: not separately recorded. Review decision: cached documented shared chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	3.937 in	✓ Secondary source only	Midea MRT14D3BWW User Manual assets.skulytics.io	Page 7
Value used by ExactFit 3.937 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Midea MRT14D3BWW User Manual assets.skulytics.io · User Manual Model scope: Secondary source Publication/revision date: Not recorded Location: Page 7 Reviewed: 2026-09-05 Too small of a distance from adjacent items may result in the degradation \| of freezing capability and increased electricity costs. Allow over 100 mm of \| clearance from each adjacent wall when installing the appliance. Open original source ↗ Why this value was used Too small of a distance from adjacent items may result in the degradation \| of freezing capability and increased electricity costs. Allow over 100 mm of \| clearance from each adjacent wall when installing the appliance. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	Unknown	? Not found	Midea MRT14D2BST User Manual assets.skulytics.io	Page 8
Value used by ExactFit Unknown · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Not established Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-04 Exact-model or explicitly covered Midea dimensional source. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 27.5591 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	Unknown	? Not found	Midea MRT14D2BST User Manual assets.skulytics.io	Page 8
Value used by ExactFit Unknown · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Midea MRT14D2BST User Manual assets.skulytics.io · User Manual Model scope: Not established Publication/revision date: Not recorded Location: Page 8 Reviewed: 2026-09-04 Exact-model or explicitly covered Midea dimensional source. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 3.937 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Conflicting published measurements

Overall width

Selected: Unknown. Earlier retained values: 27.5 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

View source scope, location, and impact on fit

Height with hinge / controlling height

Selected: Unknown. Earlier retained values: 1 in, 60.6 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

View source scope, location, and impact on fit

Depth with handle

Selected: Unknown. Earlier retained values: 28.8 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

View source scope, location, and impact on fit

Measurements not established

Overall width

Not found for safe fit use. Sources retained: 105608406.pdf. Related-model record: MRT14D2BST.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Cabinet height

Not found for safe fit use. Sources retained: 105608406.pdf. Related-model record: MRT14D2BST.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Height with hinge / controlling height

Not found for safe fit use. Sources retained: 105608406.pdf. Related-model record: MRT14D2BST.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Depth without door

Not found for safe fit use. Sources retained: 105608406.pdf. Related-model record: MRT14D2BST.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Depth with door, without handles

Not found for safe fit use. Sources retained: 105608406.pdf. Related-model record: MRT14D2BST.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Depth with handle

Not found for safe fit use. Sources retained: 105608406.pdf. Related-model record: MRT14D2BST.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Depth with doors open at 90°

Not found for safe fit use. Sources retained: 105608406.pdf. Related-model record: MRT14D2BST.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Minimum cutout width

Not found for safe fit use. Sources retained: 105608406.pdf. Related-model record: MRT14D2BST.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Minimum cutout height

Not found for safe fit use. Sources retained: 105608406.pdf. Related-model record: MRT14D2BST.

A required calculation input lacks defensible evidence.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Minimum cutout depth

Not found for safe fit use. Sources retained: 105608406.pdf. Related-model record: MRT14D2BST.

A required calculation input lacks defensible evidence.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Cabinet case width

Not found for safe fit use. Sources retained: 105608406.pdf. Related-model record: MRT14D2BST.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Adjoining-wall clearance (reviewed endpoint)

Not found for safe fit use. Sources retained: 105608406.pdf. Related-model record: MRT14D2BST.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Verify this operating or informational measurement separately. Confirm the current exact-model installation document before purchase.

Source documents and pages

Midea MRT14D2BST User Manual

assets.skulytics.io · User Manual · Scope not established

Model numbers covered: MRT14D2BST. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

16 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Minimum cutout width; Minimum cutout height; Minimum cutout depth; Left-side ventilation clearance; Right-side ventilation clearance; Top clearance; Rear clearance; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

Midea MRT14D3BWW User Manual

assets.skulytics.io · User Manual · secondary model/source

Model numbers covered: MRT14D3BWW. Publication/revision date: Not recorded. Reviewed: 2026-09-05.

1 displayed measurements supported: Hinge-side wall clearance.

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

Report a problem with this model Check whether MRT14D3BWW fits your opening Back to Midea MRT14D3BWW Read the full verification methodology

Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.

Evidence summary

Incomplete evidence

Measurements and supporting evidence

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Why evidence from MRT14D2BST applies

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Why evidence from MRT14D2BST applies

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Why evidence from MRT14D2BST applies

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Why evidence from MRT14D2BST applies

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used