Measurement evidence for Maytag MRTX5121TB

Value used by ExactFit

32.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

33-Inch Wide Top-Freezer Refrigerator with Garage Mode—21 Cu. Ft. Black MRTX5121TB | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: net Width: 32.5 in | dle Type External Handle Hidden Hinge No Reversible Door Yes ### Dimensions Cab
Reviewed: 2026-09-04

net Width: 32.5 in | dle Type External Handle Hidden Hinge No Reversible Door Yes ### Dimensions Cabinet Width 32.5 in Depth 34.125 in Depth Closed Excluding Handles 31.875 in Depth Closed Including

Why this value was used

net Width: 32.5 in | dle Type External Handle Hidden Hinge No Reversible Door Yes ### Dimensions Cabinet Width 32.5 in Depth 34.125 in Depth Closed Excluding Handles 31.875 in Depth Closed Including

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65.31 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

33-Inch Wide Top-Freezer Refrigerator with Garage Mode—21 Cu. Ft. Black MRTX5121TB | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Cabinet: 65.31 in | th-Drawer Open 61.875 in Freezer Capacity Volume 6.07 cu. ft. H
Reviewed: 2026-09-04

Height To Top Of Cabinet: 65.31 in | th-Drawer Open 61.875 in Freezer Capacity Volume 6.07 cu. ft. Height 66.0625 in Height To Top Of Cabinet 65.313 in Height To Top Of Door Hinge 66 in Height To Top Of Door Trim 66.063 in Maximum

Why this value was used

Height To Top Of Cabinet: 65.31 in | th-Drawer Open 61.875 in Freezer Capacity Volume 6.07 cu. ft. Height 66.0625 in Height To Top Of Cabinet 65.313 in Height To Top Of Door Hinge 66 in Height To Top Of Door Trim 66.063 in Maximum

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

33-Inch Wide Top-Freezer Refrigerator with Garage Mode—21 Cu. Ft. Black MRTX5121TB | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Door Hinge: 66.0 in | pacity Volume 6.07 cu. ft. Height 66.0625 in Height To Top Of
Reviewed: 2026-09-04

Height To Top Of Door Hinge: 66.0 in | pacity Volume 6.07 cu. ft. Height 66.0625 in Height To Top Of Cabinet 65.313 in Height To Top Of Door Hinge 66 in Height To Top Of Door Trim 66.063 in Maximum Height 66.0625 in Minimum Height 6

Why this value was used

Height To Top Of Door Hinge: 66.0 in | pacity Volume 6.07 cu. ft. Height 66.0625 in Height To Top Of Cabinet 65.313 in Height To Top Of Door Hinge 66 in Height To Top Of Door Trim 66.063 in Maximum Height 66.0625 in Minimum Height 6

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

27.81 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

33-Inch Wide Top-Freezer Refrigerator with Garage Mode—21 Cu. Ft. Black MRTX5121TB | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors: 27.81 in | pth Closed Excluding Handles 31.875 in Depth Closed Including Hand
Reviewed: 2026-09-04

Depth Excluding Doors: 27.81 in | pth Closed Excluding Handles 31.875 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 27.813 in Depth With Door Open 90 Degree 61.875 in Depth-Drawer Open 61.875 in Freezer Ca

Why this value was used

Depth Excluding Doors: 27.81 in | pth Closed Excluding Handles 31.875 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 27.813 in Depth With Door Open 90 Degree 61.875 in Depth-Drawer Open 61.875 in Freezer Ca

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.88 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

33-Inch Wide Top-Freezer Refrigerator with Garage Mode—21 Cu. Ft. Black MRTX5121TB | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Excluding Handles: 31.88 in | nge No Reversible Door Yes ### Dimensions Cabinet Width 3
Reviewed: 2026-09-04

Depth Closed Excluding Handles: 31.88 in | nge No Reversible Door Yes ### Dimensions Cabinet Width 32.5 in Depth 34.125 in Depth Closed Excluding Handles 31.875 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 27.813 in Depth

Why this value was used

Depth Closed Excluding Handles: 31.88 in | nge No Reversible Door Yes ### Dimensions Cabinet Width 32.5 in Depth 34.125 in Depth Closed Excluding Handles 31.875 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 27.813 in Depth

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.12 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

33-Inch Wide Top-Freezer Refrigerator with Garage Mode—21 Cu. Ft. Black MRTX5121TB | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Including Handles: 34.12 in | Cabinet Width 32.5 in Depth 34.125 in Depth Closed Exclu
Reviewed: 2026-09-04

Depth Closed Including Handles: 34.12 in | Cabinet Width 32.5 in Depth 34.125 in Depth Closed Excluding Handles 31.875 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 27.813 in Depth With Door Open 90 Degree 61.875 in Depth-

Why this value was used

Depth Closed Including Handles: 34.12 in | Cabinet Width 32.5 in Depth 34.125 in Depth Closed Excluding Handles 31.875 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 27.813 in Depth With Door Open 90 Degree 61.875 in Depth-

Other evidence found

• 90 in — superseded

  https://www.townappliance.com/products/maytag-mrtx5121tb-top-freezer-freestanding-refrigerator; location not retained. Model scope: not separately recorded. Raw value: **product depth** : **Depth With Door Open 90 Degree** . The final reviewed registry supersedes this earlier audit value. Depth Closed Including Handles: 34.12 in | Cabinet Width 32.5 in Depth 34.125 in Depth Closed Excluding Handles 31.875 in Depth Closed Including Handles 34.125 in Depth Excluding Doors 27.813 in Depth With Door Open 90 Degree 61.875 in Depth-

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

61.88 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

33-Inch Wide Top-Freezer Refrigerator with Garage Mode—21 Cu. Ft. Black MRTX5121TB | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth With Door Open 90: 61.88 in | .. Depth Closed Including Handles. 34.125 in. Depth Excluding Do
Reviewed: 2026-09-04

Depth With Door Open 90: 61.88 in | .. Depth Closed Including Handles. 34.125 in. Depth Excluding Doors. 27.813 in. Depth With Door Open 90 Degree. 61.875 in. Depth-Drawer Open. 61.875 in. Freezer ...Read more

Why this value was used

Depth With Door Open 90: 61.88 in | .. Depth Closed Including Handles. 34.125 in. Depth Excluding Doors. 27.813 in. Depth With Door Open 90 Degree. 61.875 in. Depth-Drawer Open. 61.875 in. Freezer ...Read more

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 32.5 + 2 * 0.5

Confidence label: medium.

Primary evidence

Maytag measurement source — https://www.maytag.com/content/dam/global/documents/202605/dimension-guide-w11821764-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 32.5
Reviewed: 2026-09-04

Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 32.5 + 2 * 0.5 = 33.5 in

Why this value was used

Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 32.5 + 2 * 0.5 = 33.5 in Calculation or inference: 32.5 + 2 * 0.5.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in, height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Maytag measurement source — https://www.maytag.com/content/dam/global/documents/202605/dimension-guide-w11821764-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Installation envelope: max(case 65.31, hinge 66) + 0.5 in top = 66.5 in.

Why this value was used

Installation envelope: max(case 65.31, hinge 66) + 0.5 in top = 66.5 in. Calculation or inference: max(height_case_in, height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.81 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Maytag measurement source — https://www.maytag.com/content/dam/global/documents/202605/dimension-guide-w11821764-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Installation envelope: 27.81 in case depth + 1 in rear = 28.81 in.

Why this value was used

Installation envelope: 27.81 in case depth + 1 in rear = 28.81 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRTX5121T***

Confidence label: medium.

Primary evidence

Maytag measurement source — https://www.maytag.com/content/dam/global/documents/202605/dimension-guide-w11821764-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern MRTX5121T***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern MRTX5121T***

Confidence label: medium.

Primary evidence

Maytag measurement source — https://www.maytag.com/content/dam/global/documents/202605/dimension-guide-w11821764-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern MRTX5121T***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — https://www.maytag.com/content/dam/global/documents/202605/dimension-guide-w11821764-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Exact MRTX5121 family guide: allow 1/2" between refrigerator top and overhead cabinets.

Why this value was used

Exact MRTX5121 family guide: allow 1/2" between refrigerator top and overhead cabinets.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — https://www.maytag.com/content/dam/global/documents/202605/dimension-guide-w11821764-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Exact MRTX5121 family guide: allow at least 1" between back of cabinet and wall.

Why this value was used

Exact MRTX5121 family guide: allow at least 1" between back of cabinet and wall.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — https://www.maytag.com/content/dam/global/documents/202605/dimension-guide-w11821764-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official family dimension guide: next to a fixed wall, leave 2 in minimum on hinge side
Reviewed: 2026-09-05

Official family dimension guide: next to a fixed wall, leave 2 in minimum on hinge side

Why this value was used

Official family dimension guide: next to a fixed wall, leave 2 in minimum on hinge side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.5 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

33-Inch Wide Top-Freezer Refrigerator with Garage Mode—21 Cu. Ft. Black MRTX5121TB | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width = 32.5 in | Handle Type External Handle Hidden Hinge No Reversible Door Yes ### Dimen
Reviewed: 2026-09-04

Cabinet Width = 32.5 in | Handle Type External Handle Hidden Hinge No Reversible Door Yes ### Dimensions Cabinet Width 32.5 in Depth 34.125 in Depth Closed Excluding Handles 31.875 in Depth Closed Including

Why this value was used

Cabinet Width = 32.5 in | Handle Type External Handle Hidden Hinge No Reversible Door Yes ### Dimensions Cabinet Width 32.5 in Depth 34.125 in Depth Closed Excluding Handles 31.875 in Depth Closed Including

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — https://www.maytag.com/content/dam/global/documents/202605/dimension-guide-w11821764-reva.pdf
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official family dimension guide: next to a fixed wall, leave 2 in minimum on hinge side
Reviewed: 2026-09-04

Official family dimension guide: next to a fixed wall, leave 2 in minimum on hinge side

Why this value was used

Official family dimension guide: next to a fixed wall, leave 2 in minimum on hinge side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.