Measurement evidence for Maytag MRSF4036PW

Value used by ExactFit

35.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. White MRSF4036PW | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: net Width = 35.5 in | 36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. - Maytag Dimensions Cabine
Reviewed: 2026-09-04

net Width = 35.5 in | 36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. - Maytag Dimensions Cabinet Width 35.5 in Capacity 24.5 cu. ft. Depth 34.125 in Depth Closed … 28 in Depth With Door Open | cached support: maytag.com

Why this value was used

net Width = 35.5 in | 36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. - Maytag Dimensions Cabinet Width 35.5 in Capacity 24.5 cu. ft. Depth 34.125 in Depth Closed … 28 in Depth With Door Open | cached support: maytag.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRSF4036PW 36 Inch Freestanding Side-by-Side Refrigerator with 24.5 cu. ft. Capacity, 4 Shelves, Gallon Bins, FreshLock Crisper, External Ice/Water Dispenser, and ADA Compliant: White
www.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: reviewed cached consensus: Height without Hinge = 68.625 in | t Handles: 31 5/8 Inch Depth with Door
Reviewed: 2026-09-04

reviewed cached consensus: Height without Hinge = 68.625 in | t Handles: 31 5/8 Inch Depth with Door at 90°: 49 5/16 Inch Height: 69 5/8 Inch Height without Hinges: 68 5/8 Inch Shabbos Compliance Sabbath Mode: No Certification: None Smart WiFi: No Featur | supporting domains: ajmadison.com, appliances.westcoastfurniture.ca

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 68.625 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag 36 in. 25 cu. ft. Standard Depth Side-by-Side Refrigerator in ...
www.homedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height to Top of Door Hinge = 69.625 in | Maytag 36 in. 25 cu. ft. Standard Depth Side-by- ... Heigh
Reviewed: 2026-09-04

Height to Top of Door Hinge = 69.625 in | Maytag 36 in. 25 cu. ft. Standard Depth Side-by- ... Height to Top of Door Hinge (in.) 69.625 in. Height to Top of Refrigerator Case (in.) 68.5 in. Height to Top of Refrigerator

Why this value was used

Height to Top of Door Hinge = 69.625 in | Maytag 36 in. 25 cu. ft. Standard Depth Side-by- ... Height to Top of Door Hinge (in.) 69.625 in. Height to Top of Refrigerator Case (in.) 68.5 in. Height to Top of Refrigerator

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRSF4036PW 36 Inch Freestanding Side-by-Side Refrigerator with 24.5 cu. ft. Capacity, 4 Shelves, Gallon Bins, FreshLock Crisper, External Ice/Water Dispenser, and ADA Compliant: White
www.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: reviewed cached consensus: Depth without Door = 28.0 in | . Total Capacity: 24.5 Cu. Ft. Dimensions
Reviewed: 2026-09-04

reviewed cached consensus: Depth without Door = 28.0 in | . Total Capacity: 24.5 Cu. Ft. Dimensions Width: 35 1/2 Inch Depth: 33 5/8 Inch Depth without Door: 28 Inch Depth without Handles: 31 5/8 Inch Depth with Door at 90°: 49 5/16 Inch Heigh | supporting domains: ajmadison.com, appliances.westcoastfurniture.ca

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 28 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.63 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

MRSF4036PW Maytag Refrigerators
www.lebonappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth (Without Handles) = 31.63 in | 5 inch(es). Height (With Hinge), 69.63 inch(es). Overall Depth,
Reviewed: 2026-09-04

Depth (Without Handles) = 31.63 in | 5 inch(es). Height (With Hinge), 69.63 inch(es). Overall Depth, 34.13 inch(es). Depth (Without Handles), 31.63 inch(es).

Why this value was used

Depth (Without Handles) = 31.63 in | 5 inch(es). Height (With Hinge), 69.63 inch(es). Overall Depth, 34.13 inch(es). Depth (Without Handles), 31.63 inch(es).

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.13 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

MRSF4036PW Maytag Refrigerators
www.lebonappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Overall Depth = 34.13 in | tag Refrigerators Class Height, 65"
Reviewed: 2026-09-04

Plain exact-model specification row: Overall Depth = 34.13 in | tag Refrigerators Class Height, 65" - 70". Width, 35.5 inch(es). Height (With Hinge), 69.63 inch(es). Overall Depth, 34.13 inch(es). Depth (Without Handles), 31.63 inch(es).

Why this value was used

Plain exact-model specification row: Overall Depth = 34.13 in | tag Refrigerators Class Height, 65" - 70". Width, 35.5 inch(es). Height (With Hinge), 69.63 inch(es). Overall Depth, 34.13 inch(es). Depth (Without Handles), 31.63 inch(es).

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49.31 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. White MRSF4036PW | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed … 28 in Depth With Door Open 90: 49.31 in | - Maytag Dimensions Cabinet Width 35.5 in C
Reviewed: 2026-09-04

Depth Closed … 28 in Depth With Door Open 90: 49.31 in | - Maytag Dimensions Cabinet Width 35.5 in Capacity 24.5 cu. ft. Depth 34.125 in Depth Closed … 28 in Depth With Door Open 90 Degree 49.313 in Depth-Drawer

Why this value was used

Depth Closed … 28 in Depth With Door Open 90: 49.31 in | - Maytag Dimensions Cabinet Width 35.5 in Capacity 24.5 cu. ft. Depth 34.125 in Depth Closed … 28 in Depth With Door Open 90 Degree 49.313 in Depth-Drawer

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Understanding The Ideal Cutout Width For Your Refrigerator Installation | CyCookery
cycookery.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: o your initial measurement to determine the total cutout width needed. For example, if the space mea
Reviewed: 2026-09-04

o your initial measurement to determine the total cutout width needed. For example, if the space measures 36 inches wide, the cutout width should be at least 36.5 in

Why this value was used

o your initial measurement to determine the total cutout width needed. For example, if the space measures 36 inches wide, the cutout width should be at least 36.5 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Fridge MAYTAG MRSF4036PW - User manual and instructions
www.notice-facile.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 69.625 in plus documented top clearan
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 69.625 in plus documented top clearance 0.5 in.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 70.125 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Maytag measurement source — 588fbc22d4055dd87a2888e60df87bf08b4a149ad0514e0a160a8a1a557d75c5.pdf
assets.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Installation envelope: 28 in case depth + 1 in documented rear space = 29 in.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 29 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-05

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-05

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Fridge MAYTAG MRSF4036PW - User manual and instructions
www.notice-facile.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: 1.27 cm) of space on each side and at the top
Reviewed: 2026-09-05

1.27 cm) of space on each side and at the top

Why this value was used

1.27 cm) of space on each side and at the top

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag installation document — 588fbc22d4055dd87a2888e60df87bf08b4a149ad0514e0a160a8a1a557d75c5.pdf
assets.ajmadison.com · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Family owner manual: remove rear moulding/baseboards and allow 1" (2.54 cm) of space behind the refrigerator.

Why this value was used

Family owner manual: remove rear moulding/baseboards and allow 1" (2.54 cm) of space behind the refrigerator.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Fridge MAYTAG MRSF4036PW - User manual and instructions
www.notice-facile.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: next to a fixed wall, leave a 2" (5.08 cm
Reviewed: 2026-09-05

next to a fixed wall, leave a 2" (5.08 cm

Why this value was used

next to a fixed wall, leave a 2" (5.08 cm

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.5 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. White MRSF4036PW | Maytag
Maytag · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width: 35.5 in | 36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. - Maytag Dimensions Cab
Reviewed: 2026-09-04

Cabinet Width: 35.5 in | 36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. - Maytag Dimensions Cabinet Width 35.5 in Capacity 24.5 cu. ft. Depth 34.125 in Depth Closed … 28 in Depth With Door Open

Why this value was used

Cabinet Width: 35.5 in | 36-Inch Wide Side-by-Side Refrigerator - 25 Cu. Ft. - Maytag Dimensions Cabinet Width 35.5 in Capacity 24.5 cu. ft. Depth 34.125 in Depth Closed … 28 in Depth With Door Open

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Whirlpool-platform freestanding family installation clearance

Confidence label: low.

Primary evidence

Maytag measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-04

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.