Measurement evidence for Maytag MRSF4036PB

Value used by ExactFit

35.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRSF4036PB Side-by-Side Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: net Width = 35.5 in | Weight | 264 lbs | | Total Refrigerator Capacity Volume | 24.5 cu. ft. | | Ca
Reviewed: 2026-09-04

net Width = 35.5 in | Weight | 264 lbs | | Total Refrigerator Capacity Volume | 24.5 cu. ft. | | Cabinet Width | 35.5 in | | Depth | 34.125 in | | Depth Closed Excluding Handles | 31.625 in | | Depth | cached support: appliancehomestore.com, groveappliance.com

Why this value was used

net Width = 35.5 in | Weight | 264 lbs | | Total Refrigerator Capacity Volume | 24.5 cu. ft. | | Cabinet Width | 35.5 in | | Depth | 34.125 in | | Depth Closed Excluding Handles | 31.625 in | | Depth | cached support: appliancehomestore.com, groveappliance.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRSF4036PB 36 Inch Freestanding Side-by-Side Refrigerator with 24.5 cu. ft. Capacity, 4 Shelves, Gallon Bins, FreshLock Crisper, External Ice/Water Dispenser, and ADA Compliant: Black
www.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Cabinet = 68.625 in | tanding Side-by- ... Depth With Door Open 90 Degree: 49 5/16"
Reviewed: 2026-09-04

Height To Top Of Cabinet = 68.625 in | tanding Side-by- ... Depth With Door Open 90 Degree: 49 5/16". Height: 69 5/8". Height To Top Of Cabinet: 68 5/8". Height To Top Of Door Hinge: 69 1/4". Width: 35 1/2". Gross Weight | independent cached support: ajmadison.com, appliancehomestore.com, groveappliance.com

Why this value was used

Height To Top Of Cabinet = 68.625 in | tanding Side-by- ... Depth With Door Open 90 Degree: 49 5/16". Height: 69 5/8". Height To Top Of Cabinet: 68 5/8". Height To Top Of Door Hinge: 69 1/4". Width: 35 1/2". Gross Weight | independent cached support: ajmadison.com, appliancehomestore.com, groveappliance.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRSF4036PB 36 Inch Freestanding Side-by-Side Refrigerator with 24.5 cu. ft. Capacity, 4 Shelves, Gallon Bins, FreshLock Crisper, External Ice/Water Dispenser, and ADA Compliant: Black
www.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Door Hinge = 69.25 in | r Open 90 Degree: 49 5/16". Height: 69 5/8". Height To Top
Reviewed: 2026-09-04

Height To Top Of Door Hinge = 69.25 in | r Open 90 Degree: 49 5/16". Height: 69 5/8". Height To Top Of Cabinet: 68 5/8". Height To Top Of Door Hinge: 69 1/4". Width: 35 1/2". Gross Weight | independent cached support: ajmadison.com, appliancehomestore.com, groveappliance.com

Why this value was used

Height To Top Of Door Hinge = 69.25 in | r Open 90 Degree: 49 5/16". Height: 69 5/8". Height To Top Of Cabinet: 68 5/8". Height To Top Of Door Hinge: 69 1/4". Width: 35 1/2". Gross Weight | independent cached support: ajmadison.com, appliancehomestore.com, groveappliance.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRSF4036PB Side-by-Side Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors = 28.0 in | | Height To Top Of Cabinet(IN,inches) | 68.6250 | | Capacity | 24.
Reviewed: 2026-09-04

Depth Excluding Doors = 28.0 in | | Height To Top Of Cabinet(IN,inches) | 68.6250 | | Capacity | 24.5 cu. ft. | | Depth Excluding Doors | 28 in | | Freezer Capacity Volume | 9.11 cu. ft. | | Gross Weight | 270 lbs | | Net W | cached support: appliancehomestore.com, groveappliance.com

Why this value was used

Depth Excluding Doors = 28.0 in | | Height To Top Of Cabinet(IN,inches) | 68.6250 | | Capacity | 24.5 cu. ft. | | Depth Excluding Doors | 28 in | | Freezer Capacity Volume | 9.11 cu. ft. | | Gross Weight | 270 lbs | | Net W | cached support: appliancehomestore.com, groveappliance.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.625 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRSF4036PB Side-by-Side Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Excluding Handles = 31.625 in | ity Volume | 24.5 cu. ft. | | Cabinet Width | 35.5 in |
Reviewed: 2026-09-04

Depth Closed Excluding Handles = 31.625 in | ity Volume | 24.5 cu. ft. | | Cabinet Width | 35.5 in | | Depth | 34.125 in | | Depth Closed Excluding Handles | 31.625 in | | Depth Closed Including Handles | 34.125 in | | Depth With Door Open 90 Degr | cached support: appliancehomestore.com, groveappliance.com

Why this value was used

Depth Closed Excluding Handles = 31.625 in | ity Volume | 24.5 cu. ft. | | Cabinet Width | 35.5 in | | Depth | 34.125 in | | Depth Closed Excluding Handles | 31.625 in | | Depth Closed Including Handles | 34.125 in | | Depth With Door Open 90 Degr | cached support: appliancehomestore.com, groveappliance.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRSF4036PB Side-by-Side Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Including Handles = 34.125 in | 5.5 in | | Depth | 34.125 in | | Depth Closed Excluding
Reviewed: 2026-09-04

Depth Closed Including Handles = 34.125 in | 5.5 in | | Depth | 34.125 in | | Depth Closed Excluding Handles | 31.625 in | | Depth Closed Including Handles | 34.125 in | | Depth With Door Open 90 Degree | 49.313 in | | Depth-Drawer Open | 42.125 i | cached support: appliancehomestore.com, groveappliance.com

Why this value was used

Depth Closed Including Handles = 34.125 in | 5.5 in | | Depth | 34.125 in | | Depth Closed Excluding Handles | 31.625 in | | Depth Closed Including Handles | 34.125 in | | Depth With Door Open 90 Degree | 49.313 in | | Depth-Drawer Open | 42.125 i | cached support: appliancehomestore.com, groveappliance.com

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49.313 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRSF4036PB Side-by-Side Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: | Depth Closed Including Handles | 34.125 in | | Depth With Door Open 90 Degree | 49.313 in | | Dept
Reviewed: 2026-09-04

| Depth Closed Including Handles | 34.125 in | | Depth With Door Open 90 Degree | 49.313 in | | Depth-Drawer Open | 42.125 in | | Height | 69

Why this value was used

| Depth Closed Including Handles | 34.125 in | | Depth With Door Open 90 Degree | 49.313 in | | Depth-Drawer Open | 42.125 in | | Height | 69

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — https://www.bedienungsanleitu.ng/maytag/mrsf4036pb/anleitung?p=7
www.bedienungsanleitu.ng · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-04

Normal minimum cabinet cut-out width required for product installation is 36 in. A total 54 in opening is only recommended beside a fixed wall for full door swing/crisper removal.

Why this value was used

Normal minimum cabinet cut-out width required for product installation is 36 in. A total 54 in opening is only recommended beside a fixed wall for full door swing/crisper removal.

Other evidence found

• 54 in — superseded

  https://www.notice-facile.com/en/manual/657219/maytag+mrsf4036pb; location not retained. Model scope: not separately recorded. Raw value: opening width = 54.0 in | ual and instructions MAYTAG in PDF. (36-inch model, Open the doors 90°. cabinet opening width of 54" (137.16 cm) is recommended. For Counter-Depth Side-by-Side Installation: . The final reviewed registry supersedes this earlier audit value. Normal minimum cabinet cut-out width required for product installation is 36 in. A total 54 in opening is only recommended beside a fixed wall for full door swing/crisper removal.

  Open alternative source ↗

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

MAYTAG MRSF4036PB - User manual and instructions
www.notice-facile.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening height derived from highest appliance endpoint 69.25 in plus documented top clearanc
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 69.25 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 69.25 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Maytag measurement source — 588fbc22d4055dd87a2888e60df87bf08b4a149ad0514e0a160a8a1a557d75c5.pdf
assets.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Installation envelope: 28 in case depth + 1 in documented rear space = 29 in.

Why this value was used

Installation envelope: 28 in case depth + 1 in documented rear space = 29 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-05

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-05

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

MAYTAG MRSF4036PB - User manual and instructions
www.notice-facile.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: 1.27 cm) of space on each side and at the top
Reviewed: 2026-09-05

1.27 cm) of space on each side and at the top

Why this value was used

1.27 cm) of space on each side and at the top

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Maytag installation document — 588fbc22d4055dd87a2888e60df87bf08b4a149ad0514e0a160a8a1a557d75c5.pdf
assets.ajmadison.com · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Family owner manual: remove rear moulding/baseboards and allow 1" (2.54 cm) of space behind the refrigerator.

Why this value was used

Family owner manual: remove rear moulding/baseboards and allow 1" (2.54 cm) of space behind the refrigerator.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

MAYTAG MRSF4036PB - User manual and instructions
www.notice-facile.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: next to a fixed wall, leave a 2" (5.08 cm
Reviewed: 2026-09-05

next to a fixed wall, leave a 2" (5.08 cm

Why this value was used

next to a fixed wall, leave a 2" (5.08 cm

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.5 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Maytag MRSF4036PB Side-by-Side Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: l Refrigerator Capacity Volume | 24.5 cu. ft. | | Cabinet Width | 35.5 in | | Depth | 34.125 in | |
Reviewed: 2026-09-04

l Refrigerator Capacity Volume | 24.5 cu. ft. | | Cabinet Width | 35.5 in | | Depth | 34.125 in | | Depth Closed Excluding

Why this value was used

l Refrigerator Capacity Volume | 24.5 cu. ft. | | Cabinet Width | 35.5 in | | Depth | 34.125 in | | Depth Closed Excluding

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Whirlpool-platform freestanding family installation clearance

Confidence label: low.

Primary evidence

Maytag measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-04

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.