Measurement evidence for LG LTCS20020W

Value used by ExactFit

30 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

LG 20 Cu. Ft. Top Freezer Refrigerator LTCS20020W | All Make Appliance
www.allmakeappliances.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Width = 30.0 in | Freezer Refrigerator Model: LTCS20020W | | |
Reviewed: 2026-09-04

Plain exact-model specification row: Width = 30.0 in | Freezer Refrigerator Model: LTCS20020W | | | | --- | --- | | Brand | LG | | Model # | LTCS20020W | | Width | 30 in. | | Height | 68.5 in. | | Depth | 35.6 in. | $745.00 $949.00You save $204.00 (21%) or$63/mo suggested payments with 12-

Why this value was used

Plain exact-model specification row: Width = 30.0 in | Freezer Refrigerator Model: LTCS20020W | | | | --- | --- | | Brand | LG | | Model # | LTCS20020W | | Width | 30 in. | | Height | 68.5 in. | | Depth | 35.6 in. | $745.00 $949.00You save $204.00 (21%) or$63/mo suggested payments with 12-

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — https://media.us.lg.com/m/b2bf5bfcced4eea/original/LTCS20020_-LG-Builder-Spec-Sheet.pdf
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Exact-model official builder sheet: Height to Top of Case 65.6 in (1,666.9 mm); 1,666.9 mm = 65.62598 in, confirming 65 5/8 in and rejecting the malformed OCR fraction 65 11/22.

Why this value was used

Exact-model official builder sheet: Height to Top of Case 65.6 in (1,666.9 mm); 1,666.9 mm = 65.62598 in, confirming 65 5/8 in and rejecting the malformed OCR fraction 65 11/22.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

TOP FREEZER REFRIGERATOR
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: op of Case 65.6 " (1,666.9 mm) 68" (1,727.2 mm) D Height to Top of Hinge 66.1" (1,679 mm) 69” (1,752
Reviewed: 2026-09-04

op of Case 65.6 " (1,666.9 mm) 68" (1,727.2 mm) D Height to Top of Hinge 66.1" (1,679 mm) 69” (1,752.6 mm) E Cabinet Back / Side

Why this value was used

op of Case 65.6 " (1,666.9 mm) 68" (1,727.2 mm) D Height to Top of Hinge 66.1" (1,679 mm) 69” (1,752.6 mm) E Cabinet Back / Side

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

20 cu. ft. Top Freezer Refrigerator - LTCS20020W | LG USA
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth without Door = 29.0 in | Counter Depth No Depth (Total with Door Open) 60.25" Depth with Hand
Reviewed: 2026-09-04

Depth without Door = 29.0 in | Counter Depth No Depth (Total with Door Open) 60.25" Depth with Handles 33.75" Depth without Door 29" Depth without

Why this value was used

Depth without Door = 29.0 in | Counter Depth No Depth (Total with Door Open) 60.25" Depth with Handles 33.75" Depth without Door 29" Depth without

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

33.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

LG 20 Cu. Ft. Top Freezer Refrigerator LTCS20020W | All Make Appliance
www.allmakeappliances.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Without Handles = 33.75 in | LTCS20020W | All Make Appliance Depth With Handles33.75" Depth W
Reviewed: 2026-09-04

Depth Without Handles = 33.75 in | LTCS20020W | All Make Appliance Depth With Handles33.75" Depth Without Door29" Depth Without Handles33.75" ## Similar Refrigerators 29 Cu. Ft. Smart Standard-depth Max™ 4-door French Doo

Why this value was used

Depth Without Handles = 33.75 in | LTCS20020W | All Make Appliance Depth With Handles33.75" Depth Without Door29" Depth Without Handles33.75" ## Similar Refrigerators 29 Cu. Ft. Smart Standard-depth Max™ 4-door French Doo

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

20 cu. ft. Top Freezer Refrigerator - LTCS20020W | LG USA
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth with Handles = 33.75 in | HxD) 31.8" x 68.5" x 35.6" Counter Depth No Depth (Total with Door O
Reviewed: 2026-09-04

Depth with Handles = 33.75 in | HxD) 31.8" x 68.5" x 35.6" Counter Depth No Depth (Total with Door Open) 60.25" Depth with Handles 33.75" Depth without Door 29" Depth without

Why this value was used

Depth with Handles = 33.75 in | HxD) 31.8" x 68.5" x 35.6" Counter Depth No Depth (Total with Door Open) 60.25" Depth with Handles 33.75" Depth without Door 29" Depth without

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

60.3 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — https://media.us.lg.com/m/b2bf5bfcced4eea/original/LTCS20020_-LG-Builder-Spec-Sheet.pdf
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Exact family LG Builder sheet page 2 diagram: H Depth (Total with Door Open 90°) = 60.3 in

Why this value was used

Exact family LG Builder sheet page 2 diagram: H Depth (Total with Door Open 90°) = 60.3 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in + 2 * exact-model installation side clearance

Confidence label: medium.

Calculation inputs: Overall width;

Primary evidence

LG measurement source — https://media.us.lg.com/m/b2bf5bfcced4eea/original/LTCS20020_-LG-Builder-Spec-Sheet.pdf + https://www.bandjappliance.com/en/product/637163-lg-ltcs20020w
LG · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Derived minimum opening width: 30 + 2 x 2 = 34 in. Exact-model clearance evidence: Back, Top and Side Clearance 2"; Installation Clearance Sides 2"; Installation Clearance Sides: 2"

Why this value was used

Derived minimum opening width: 30 + 2 x 2 = 34 in. Exact-model clearance evidence: Back, Top and Side Clearance 2"; Installation Clearance Sides 2"; Installation Clearance Sides: 2" Calculation or inference: width_doors_closed_in + 2 * exact-model installation side clearance.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

LG measurement source — https://media.us.lg.com/m/b2bf5bfcced4eea/original/LTCS20020_-LG-Builder-Spec-Sheet.pdf
LG · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 66.1 in plus documented top clearance 2.0 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 66.1 in plus documented top clearance 2.0 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

LG LTCS20020B Owner’s Manual
assets.skulytics.io · Owner’s Manual
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 13
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.0 in plus propagated rear clearance 2.0 in.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 31 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

TOP FREEZER REFRIGERATOR
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: 6.1" (1,679 mm) 69” (1,752.6 mm) E Cabinet Back / Side Clearance 2" (50.8 mm) 2” (50.8 mm) F Depth w
Reviewed: 2026-09-05

6.1" (1,679 mm) 69” (1,752.6 mm) E Cabinet Back / Side Clearance 2" (50.8 mm) 2” (50.8 mm) F Depth without Door 29.5"

Why this value was used

6.1" (1,679 mm) 69” (1,752.6 mm) E Cabinet Back / Side Clearance 2" (50.8 mm) 2” (50.8 mm) F Depth without Door 29.5"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

TOP FREEZER REFRIGERATOR
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: 6.1" (1,679 mm) 69” (1,752.6 mm) E Cabinet Back / Side Clearance 2" (50.8 mm) 2” (50.8 mm) F Depth w
Reviewed: 2026-09-05

6.1" (1,679 mm) 69” (1,752.6 mm) E Cabinet Back / Side Clearance 2" (50.8 mm) 2” (50.8 mm) F Depth without Door 29.5"

Why this value was used

6.1" (1,679 mm) 69” (1,752.6 mm) E Cabinet Back / Side Clearance 2" (50.8 mm) 2” (50.8 mm) F Depth without Door 29.5"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

LG measurement source — https://media.us.lg.com/m/b2bf5bfcced4eea/original/LTCS20020_-LG-Builder-Spec-Sheet.pdf
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

without Handle | 2" | Installation Clearance Sides 2", Top 2", Back 2"

Why this value was used

without Handle | 2" | Installation Clearance Sides 2", Top 2", Back 2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: model-series prefix LTCS200; 2 direct seeds; unanimous value 2.0

Confidence label: medium.

Primary evidence

LG LTCS20020B Owner’s Manual
assets.skulytics.io · Owner’s Manual
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 13
Reviewed: 2026-09-05

Conflict-free 7-character model-series consensus (LTCS200) from 2 directly evidenced models; example LG LTCS20020B: Back Clearance | 2'' (50.8 mm) | 2'' (50.8 mm)

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 2 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG specification record — popular_lg_named_cache_hinge_evidence.json
Publisher not recorded · Specification sheet
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact finish-family specification: Door Edge Clearance with Handle 2".
Reviewed: 2026-09-05

Exact finish-family specification: Door Edge Clearance with Handle 2".

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 2 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in mapped from populated width_doors_closed_in; doors do not materially change closed product width

Confidence label: low.

Primary evidence

LG 20 Cu. Ft. Top Freezer Refrigerator LTCS20020W | All Make Appliance
www.allmakeappliances.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Low-confidence same-appliance width mapping: case_width_in=30.0 in from width_doors_closed_in.
Reviewed: 2026-09-04

Low-confidence same-appliance width mapping: case_width_in=30.0 in from width_doors_closed_in.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 30 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

TOP FREEZER REFRIGERATOR
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: 6.1" (1,679 mm) 69” (1,752.6 mm) E Cabinet Back / Side Clearance 2" (50.8 mm) 2” (50.8 mm) F Depth w
Reviewed: 2026-09-04

6.1" (1,679 mm) 69” (1,752.6 mm) E Cabinet Back / Side Clearance 2" (50.8 mm) 2” (50.8 mm) F Depth without Door 29.5"

Why this value was used

6.1" (1,679 mm) 69” (1,752.6 mm) E Cabinet Back / Side Clearance 2" (50.8 mm) 2” (50.8 mm) F Depth without Door 29.5"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.