Measurement evidence for LG LT18S2100W

Value used by ExactFit

27.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LT18S2100W Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Width 27 1/2"

Why this value was used

Width 27 1/2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

64 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LT18S2100W Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Height to Top of Case 64"

Why this value was used

Height to Top of Case 64"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LT18S2100W Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Height to Top of Door Hinge 65"

Why this value was used

Height to Top of Door Hinge 65"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LT18S2100W Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Depth without Door 29 3/4"

Why this value was used

Depth without Door 29 3/4"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

33.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LT18S2100W Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Depth without Handles 33 3/4"

Why this value was used

Depth without Handles 33 3/4"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

33.75 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(documented closed depths 33.5, 33.75)

Confidence label: medium.

Primary evidence

LG measurement source — https://www.lg.com/us/business/download/resources/CT00021979/LT18S2100_LG_Builder_Spec_Sheet%5B20240124_011922%5D.pdf
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official sheet contradicts itself: with handles 33 1/2 in and without handles 33 3/4 in. Conservativ
Reviewed: 2026-09-04

Official sheet contradicts itself: with handles 33 1/2 in and without handles 33 3/4 in. Conservative fit value uses the larger documented closed depth 33 3/4 in.

Why this value was used

Official sheet contradicts itself: with handles 33 1/2 in and without handles 33 3/4 in. Conservative fit value uses the larger documented closed depth 33 3/4 in. Calculation or inference: max(documented closed depths 33.5, 33.75).

Other evidence found

• 33.5 in — superseded

  90111427.pdf; page 2. Model scope: not separately recorded. Raw value: DIMENSIONS / CLEARANCES DIMENSIONS / CLEARANCES / WEIGHTS Depth with Handles 33 1/2". The final reviewed registry supersedes this earlier audit value. Official sheet contradicts itself: with handles 33 1/2 in and without handles 33 3/4 in. Conservative fit value uses the larger documented closed depth 33 3/4 in.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

58.25 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LT18S2100W Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Depth (Total with Door Open) 58 1/4"

Why this value was used

Depth (Total with Door Open) 58 1/4"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

31.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in + 2 * exact-model installation side clearance

Confidence label: medium.

Calculation inputs: Overall width;

Primary evidence

28" 18 cu. ft. ENERGY STAR® Certified Top Freezer Refrigerator - LT18S2100W | LG Canada
LG · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Derived minimum opening width: 27.5 + 2 x 2 = 31.5 in. Exact-model clearance evidence: Installation Clearance Sides 2"; Installation Clearance | Sides 2"

Why this value was used

Derived minimum opening width: 27.5 + 2 x 2 = 31.5 in. Exact-model clearance evidence: Installation Clearance Sides 2"; Installation Clearance | Sides 2" Calculation or inference: width_doors_closed_in + 2 * exact-model installation side clearance.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

67 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

LG LT18S2100W Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 65.0 in plus documented top clearance 2.0 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 65.0 in plus documented top clearance 2.0 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

LG LT18S2100S Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening depth derived from case-only depth 29.75 in plus propagated rear clearance 2.0 in.
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.75 in plus propagated rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 29.75 in plus propagated rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

28" 18 cu. ft. ENERGY STAR® Certified Top Freezer Refrigerator - LT18S2100W | LG Canada
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Corrected prior semantic mismatch 1.75 in (Door Edge Clearance with Handle 1 3/4"). Exact-model installation-side evidence: Installation Clearance Sides 2"; Installation Clearance | Sides 2"

Why this value was used

Corrected prior semantic mismatch 1.75 in (Door Edge Clearance with Handle 1 3/4"). Exact-model installation-side evidence: Installation Clearance Sides 2"; Installation Clearance | Sides 2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

28" 18 cu. ft. ENERGY STAR® Certified Top Freezer Refrigerator - LT18S2100W | LG Canada
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Corrected prior semantic mismatch 1.75 in (Door Edge Clearance with Handle 1 3/4"). Exact-model installation-side evidence: Installation Clearance Sides 2"; Installation Clearance | Sides 2"

Why this value was used

Corrected prior semantic mismatch 1.75 in (Door Edge Clearance with Handle 1 3/4"). Exact-model installation-side evidence: Installation Clearance Sides 2"; Installation Clearance | Sides 2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

LG LT18S2100W Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Installation Clearance | Sides 2", Top 2", Back 2" | Approx. Weight (Product /

Why this value was used

Installation Clearance | Sides 2", Top 2", Back 2" | Approx. Weight (Product /

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model LG LT18S2100S

Confidence label: medium.

Primary evidence

LG LT18S2100S Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Conflict-free corporate-family exact 8-dimension chassis match to LG LT18S2100S; original evidence:
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to LG LT18S2100S; original evidence: Back Clearance | 2" (50 mm) | F

Why this value was used

Conflict-free corporate-family exact 8-dimension chassis match to LG LT18S2100S; original evidence: Back Clearance | 2" (50 mm) | F Calculation or inference: exact 8-dimension chassis signature; source model LG LT18S2100S.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1.75 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LT18S2100W Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Door Edge Clearance with Handle 1 3/4"

Why this value was used

Door Edge Clearance with Handle 1 3/4"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

27.5 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LT18S2100W Spec Sheet
assets.skulytics.io · Spec Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Width 27 1/2"

Why this value was used

Width 27 1/2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

28" 18 cu. ft. ENERGY STAR® Certified Top Freezer Refrigerator - LT18S2100W | LG Canada
LG · Installation manual
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Corrected prior semantic mismatch 1.75 in (Door Edge Clearance with Handle 1 3/4"). Exact-model installation-side evidence: Installation Clearance Sides 2"; Installation Clearance | Sides 2"

Why this value was used

Corrected prior semantic mismatch 1.75 in (Door Edge Clearance with Handle 1 3/4"). Exact-model installation-side evidence: Installation Clearance Sides 2"; Installation Clearance | Sides 2"

Other evidence found

• 1.75 in — superseded

  90111427.pdf; page 2. Model scope: not separately recorded. Raw value: Door Edge Clearance with Handle 1 3/4". The final reviewed registry supersedes this earlier audit value. Corrected prior semantic mismatch 1.75 in (Door Edge Clearance with Handle 1 3/4"). Exact-model installation-side evidence: Installation Clearance Sides 2"; Installation Clearance | Sides 2"

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.