Measurement evidence for LG LRDCS2603D

Value used by ExactFit

32.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG measurement source — https://www.us-appliance.com/content/pdf/c/LRDCS2603S_Specs.pdf
www.us-appliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Exact printed family scope includes LRDCS2603D; page 1 Width = 32 3/4 in

Why this value was used

Exact printed family scope includes LRDCS2603D; page 1 Width = 32 3/4 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

[PDF] LRDCS2603_ - LG Electronics
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height to Top of Case: 68.5 in | CLEARANCES A Depth without Handles 33 5/8" (854 mm) B Width 32 3/4
Reviewed: 2026-09-04

Height to Top of Case: 68.5 in | CLEARANCES A Depth without Handles 33 5/8" (854 mm) B Width 32 3/4" (831 mm) C Height to Top of Case 68 1/2" (1740 mm) D Height to Top of Hinge 69 7/8" (1774 mm) E Back Clearance 2" (50 mm

Why this value was used

Height to Top of Case: 68.5 in | CLEARANCES A Depth without Handles 33 5/8" (854 mm) B Width 32 3/4" (831 mm) C Height to Top of Case 68 1/2" (1740 mm) D Height to Top of Hinge 69 7/8" (1774 mm) E Back Clearance 2" (50 mm

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.88 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

[PDF] LRDCS2603_ - LG Electronics
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height to Top of Hinge: 69.88 in | " (854 mm) B Width 32 3/4" (831 mm) C Height to Top of Case 68 1/
Reviewed: 2026-09-04

Height to Top of Hinge: 69.88 in | " (854 mm) B Width 32 3/4" (831 mm) C Height to Top of Case 68 1/2" (1740 mm) D Height to Top of Hinge 69 7/8" (1774 mm) E Back Clearance 2" (50 mm) F Depth without Door 29 1/2" (748 mm) G D

Why this value was used

Height to Top of Hinge: 69.88 in | " (854 mm) B Width 32 3/4" (831 mm) C Height to Top of Case 68 1/2" (1740 mm) D Height to Top of Hinge 69 7/8" (1774 mm) E Back Clearance 2" (50 mm) F Depth without Door 29 1/2" (748 mm) G D

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG 33-inch, 26 cu. ft. Bottom Freezer Refrigerator with Door Cooling+
www.merlinstv.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: exact labeled manufacturer evidence overrides the current endpoint
Reviewed: 2026-09-04

exact labeled manufacturer evidence overrides the current endpoint

Why this value was used

exact labeled manufacturer evidence overrides the current endpoint

Other evidence found

• 29 in — superseded

  https://www.merlinstv.com/products/lg-33-inch-26-cu-ft-bottom-freezer-refrigerator-with-door-cooling-lrdcs2603d; location not retained. Model scope: not separately recorded. Raw value: ght 226 lb(s) / 102.51 kg Additional Dimensions • Depth without door: 29" • Depth (total with door open): 62-3/4" • Height . The final reviewed registry supersedes this earlier audit value. exact labeled manufacturer evidence overrides the current endpoint

  Open alternative source ↗

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

33.625 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

[PDF] LRDCS2603S
images.thdstatic.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: exact labeled manufacturer evidence overrides the current endpoint
Reviewed: 2026-09-04

exact labeled manufacturer evidence overrides the current endpoint

Why this value was used

exact labeled manufacturer evidence overrides the current endpoint

Other evidence found

• 33 in — superseded

  https://images.thdstatic.com/catalog/pdfImages/9c/9cf98339-4e24-453f-aef7-00fbcf3e34ee.pdf; location not retained. Model scope: not separately recorded. Raw value: ONS/CLEARANCES/WEIGHTS Depth with Handles 34 7/8" Depth without Handles 33" Depth without Door 29 1/2" Depth (Total with Door. The final reviewed registry supersedes this earlier audit value. exact labeled manufacturer evidence overrides the current endpoint

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

[PDF] LRDCS2603_ - LG Electronics
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth with Handle = 35.0 in | " (1774 mm) E Back Clearance 2" (50 mm) F Depth without Door 29 1/2" (
Reviewed: 2026-09-04

Depth with Handle = 35.0 in | " (1774 mm) E Back Clearance 2" (50 mm) F Depth without Door 29 1/2" (748 mm) G Depth with Handle 35" (889 mm) H Depth (Total with Freezer Drawer Open) 55 5/8" (1412 mm) I Depth (To

Why this value was used

Depth with Handle = 35.0 in | " (1774 mm) E Back Clearance 2" (50 mm) F Depth without Door 29 1/2" (748 mm) G Depth with Handle 35" (889 mm) H Depth (Total with Freezer Drawer Open) 55 5/8" (1412 mm) I Depth (To

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

63.25 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

[PDF] LRDCS2603_ - LG Electronics
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth (Total with Door Open 90°: 63.25 in | andle 35" (889 mm) H Depth (Total with Freezer Drawer Op
Reviewed: 2026-09-04

Depth (Total with Door Open 90°: 63.25 in | andle 35" (889 mm) H Depth (Total with Freezer Drawer Open) 55 5/8" (1412 mm) I Depth (Total with Door Open 90°) 63 1/4" (1606 mm) INSTALLATION NOTES •  The installation location chosen for the refri

Why this value was used

Depth (Total with Door Open 90°: 63.25 in | andle 35" (889 mm) H Depth (Total with Freezer Drawer Open) 55 5/8" (1412 mm) I Depth (Total with Door Open 90°) 63 1/4" (1606 mm) INSTALLATION NOTES •  The installation location chosen for the refri

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 32.75 + 2 * 2 = 36.75 inches

Confidence label: medium.

Primary evidence

[PDF] LRDCS2603_ - LG Electronics
LG · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Exact current LRDCS2603 family builder sheet: Width 32 3/4"; Installation Clearance Sides 2".

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 36.75 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

71.88 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

[PDF] LRDCS2603_ - LG Electronics
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening height derived from highest stored appliance endpoint 69.88 in plus documented top c
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 69.88 in plus documented top clearance 2.0 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 69.88 in plus documented top clearance 2.0 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

[PDF] LRDCS2603_ - LG Electronics
LG · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.5 in plus documented rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 29.5 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

[PDF] LRDCS2603_ - LG Electronics
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Installation Clearance Sides = 2.0 in | 4" Door Edge Clearance with Handle 4 1/4" Door Edge Clearanc
Reviewed: 2026-09-05

Installation Clearance Sides = 2.0 in | 4" Door Edge Clearance with Handle 4 1/4" Door Edge Clearance without Handle 2" Installation Clearance Sides 2", Top 2", Back 2" Approx. Weight (Product / Carton) 226 lbs. / 250 lbs. Carton D

Why this value was used

Installation Clearance Sides = 2.0 in | 4" Door Edge Clearance with Handle 4 1/4" Door Edge Clearance without Handle 2" Installation Clearance Sides 2", Top 2", Back 2" Approx. Weight (Product / Carton) 226 lbs. / 250 lbs. Carton D

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

[PDF] LRDCS2603_ - LG Electronics
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Installation Clearance Sides = 2.0 in | 4" Door Edge Clearance with Handle 4 1/4" Door Edge Clearanc
Reviewed: 2026-09-05

Installation Clearance Sides = 2.0 in | 4" Door Edge Clearance with Handle 4 1/4" Door Edge Clearance without Handle 2" Installation Clearance Sides 2", Top 2", Back 2" Approx. Weight (Product / Carton) 226 lbs. / 250 lbs. Carton D

Why this value was used

Installation Clearance Sides = 2.0 in | 4" Door Edge Clearance with Handle 4 1/4" Door Edge Clearance without Handle 2" Installation Clearance Sides 2", Top 2", Back 2" Approx. Weight (Product / Carton) 226 lbs. / 250 lbs. Carton D

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

[PDF] LRDCS2603_ - LG Electronics
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Installation Clearance Sides = 2.0 in | 4" Door Edge Clearance with Handle 4 1/4" Door Edge Clearanc
Reviewed: 2026-09-05

Installation Clearance Sides = 2.0 in | 4" Door Edge Clearance with Handle 4 1/4" Door Edge Clearance without Handle 2" Installation Clearance Sides 2", Top 2", Back 2" Approx. Weight (Product / Carton) 226 lbs. / 250 lbs. Carton D

Why this value was used

Installation Clearance Sides = 2.0 in | 4" Door Edge Clearance with Handle 4 1/4" Door Edge Clearance without Handle 2" Installation Clearance Sides 2", Top 2", Back 2" Approx. Weight (Product / Carton) 226 lbs. / 250 lbs. Carton D

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

[PDF] LRDCS2603_ - LG Electronics
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

C Height to Top of Case 68 11/22" (1740 mm) | D Height to Top of Hinge 69 77/88" (1774 mm) | E Back Clearance 2" (50 mm)

Why this value was used

C Height to Top of Case 68 11/22" (1740 mm) | D Height to Top of Hinge 69 77/88" (1774 mm) | E Back Clearance 2" (50 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG specification record — LG__LRDCS2603D.json
Publisher not recorded · Specification sheet
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model LG specification: Door Edge Clearance with Handle 4 1/4".
Reviewed: 2026-09-05

Exact-model LG specification: Door Edge Clearance with Handle 4 1/4".

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 4.25 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in mapped from populated width_doors_closed_in; doors do not materially change closed product width

Confidence label: low.

Primary evidence

LG measurement source — https://www.us-appliance.com/content/pdf/c/LRDCS2603S_Specs.pdf
www.us-appliance.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Low-confidence same-appliance width mapping: case_width_in=32.75 in from width_doors_closed_in.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 32.75 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

2 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

[PDF] LRDCS2603_ - LG Electronics
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Installation Clearance Sides = 2.0 in | 4" Door Edge Clearance with Handle 4 1/4" Door Edge Clearanc
Reviewed: 2026-09-04

Installation Clearance Sides = 2.0 in | 4" Door Edge Clearance with Handle 4 1/4" Door Edge Clearance without Handle 2" Installation Clearance Sides 2", Top 2", Back 2" Approx. Weight (Product / Carton) 226 lbs. / 250 lbs. Carton D

Why this value was used

Installation Clearance Sides = 2.0 in | 4" Door Edge Clearance with Handle 4 1/4" Door Edge Clearance without Handle 2" Installation Clearance Sides 2", Top 2", Back 2" Approx. Weight (Product / Carton) 226 lbs. / 250 lbs. Carton D

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.