Measurement evidence for LG LF29H8330D

Value used by ExactFit

35.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LF29H8330D Specifications
assets.skulytics.io · Specifications
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Width 35 3/4"

Why this value was used

Width 35 3/4"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

29 cu. ft. Standard-Depth 4-Door French Door Refrigerator | LG USA
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Height to Top of Case = 69.0 in. Context: Door Edge
Reviewed: 2026-09-04

Reviewed cached exact-model manufacturer label: Height to Top of Case = 69.0 in. Context: Door Edge Clearance with Handle 4.25" Door Edge Clearance without Handle 2.25" Height to Top of Case 69" Height to Top of Door Hinge 70.37" Installation Clearance Sides 1/8", Top 1", B

Why this value was used

Reviewed cached exact-model manufacturer label: Height to Top of Case = 69.0 in. Context: Door Edge Clearance with Handle 4.25" Door Edge Clearance without Handle 2.25" Height to Top of Case 69" Height to Top of Door Hinge 70.37" Installation Clearance Sides 1/8", Top 1", B

Other evidence found

• 70.375 in — superseded

  77836515.pdf; page 1. Model scope: not separately recorded. Raw value: W x H x D) 35 3/4" x 70 3/8" x 34 3/8". The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Height to Top of Case = 69.0 in. Context: Door Edge Clearance with Handle 4.25" Door Edge Clearance without Handle 2.25" Height to Top of Case 69" Height to Top of Door Hinge 70.37" Installation Clearance Sides 1/8", Top 1", B

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LF29H8330D Specifications
assets.skulytics.io · Specifications
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

W x H x D) 35 3/4" x 70 3/8" x 34 3/8"

Why this value was used

W x H x D) 35 3/4" x 70 3/8" x 34 3/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

30 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LF29H8330D Specifications
assets.skulytics.io · Specifications
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Depth without Door 30"

Why this value was used

Depth without Door 30"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

34.375 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LF29H8330D Specifications
assets.skulytics.io · Specifications
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Depth without Handles 34 3/8

Why this value was used

Depth without Handles 34 3/8

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.87 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

29 cu. ft. Standard-Depth 4-Door French Door Refrigerator | LG USA
LG · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Depth with Handles = 36.87 in. Context: epth (Draw O
Reviewed: 2026-09-04

Reviewed cached exact-model manufacturer label: Depth with Handles = 36.87 in. Context: epth (Draw Open Fully without Handle) 55.37" Depth (Total with Door Open) 48.5" Depth with Handles 36.87" Depth without Door 30" Depth without Handles 34.37" Dimensions (W case x H top

Why this value was used

Reviewed cached exact-model manufacturer label: Depth with Handles = 36.87 in. Context: epth (Draw Open Fully without Handle) 55.37" Depth (Total with Door Open) 48.5" Depth with Handles 36.87" Depth without Door 30" Depth without Handles 34.37" Dimensions (W case x H top

Other evidence found

• 34.375 in — superseded

  77836515.pdf; page 1. Model scope: not separately recorded. Raw value: W x H x D) 35 3/4" x 70 3/8" x 34 3/8". The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Depth with Handles = 36.87 in. Context: epth (Draw Open Fully without Handle) 55.37" Depth (Total with Door Open) 48.5" Depth with Handles 36.87" Depth without Door 30" Depth without Handles 34.37" Dimensions (W case x H top

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

48.5 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LF29H8330D Specifications
assets.skulytics.io · Specifications
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Depth (Total with Door Open) 48 1/2

Why this value was used

Depth (Total with Door Open) 48 1/2

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in + 2 * exact-model installation side clearance

Confidence label: medium.

Calculation inputs: Overall width;

Primary evidence

LG LF29H8330D
www.abcwarehouse.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Derived minimum opening width: 35.75 + 2 x 0.125 = 36 in. Exact-model clearance evidence: Installation Clearance Sides 1/8"; Installation Clearance | Sides 1/8"

Why this value was used

Derived minimum opening width: 35.75 + 2 x 0.125 = 36 in. Exact-model clearance evidence: Installation Clearance Sides 1/8"; Installation Clearance | Sides 1/8" Calculation or inference: width_doors_closed_in + 2 * exact-model installation side clearance.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

71.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

LG LF29H8330D Specifications
assets.skulytics.io · Specifications
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 70.375 in plus documented top clearance 1.0 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 70.375 in plus documented top clearance 1.0 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

32 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

LG LF29H8330D Specifications
assets.skulytics.io · Specifications
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

LG opening envelope: 30.0 + 2.0 = 32.0 in.

Why this value was used

LG opening envelope: 30.0 + 2.0 = 32.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LF29H8330D
www.abcwarehouse.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Corrected prior semantic mismatch 4.25 in (Door Edge Clearance with Handle 4 1/4"). Exact-model installation-side evidence: Installation Clearance Sides 1/8"; Installation Clearance | Sides 1/8"

Why this value was used

Corrected prior semantic mismatch 4.25 in (Door Edge Clearance with Handle 4 1/4"). Exact-model installation-side evidence: Installation Clearance Sides 1/8"; Installation Clearance | Sides 1/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LF29H8330D
www.abcwarehouse.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Corrected prior semantic mismatch 4.25 in (Door Edge Clearance with Handle 4 1/4"). Exact-model installation-side evidence: Installation Clearance Sides 1/8"; Installation Clearance | Sides 1/8"

Why this value was used

Corrected prior semantic mismatch 4.25 in (Door Edge Clearance with Handle 4 1/4"). Exact-model installation-side evidence: Installation Clearance Sides 1/8"; Installation Clearance | Sides 1/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

LG LF29H8330D Specifications
assets.skulytics.io · Specifications
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Installation Clearance | Sides 1/8", Top 1", Back 2" | Carton Dimensions (WxHxD)

Why this value was used

Installation Clearance | Sides 1/8", Top 1", Back 2" | Carton Dimensions (WxHxD)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LF29H8330D Specifications
assets.skulytics.io · Specifications
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Installation Clearance Sides 1/8", Top 1", Back 2"

Why this value was used

Installation Clearance Sides 1/8", Top 1", Back 2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

4.25 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LF29H8330D Specifications
assets.skulytics.io · Specifications
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Door Edge Clearance with Handle 4 1/4"

Why this value was used

Door Edge Clearance with Handle 4 1/4"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.75 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LF29H8330D Specifications
assets.skulytics.io · Specifications
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Width 35 3/4"

Why this value was used

Width 35 3/4"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

0.125 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

LG LF29H8330D
www.abcwarehouse.com · Installation manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Corrected prior semantic mismatch 4.25 in (Door Edge Clearance with Handle 4 1/4"). Exact-model installation-side evidence: Installation Clearance Sides 1/8"; Installation Clearance | Sides 1/8"

Why this value was used

Corrected prior semantic mismatch 4.25 in (Door Edge Clearance with Handle 4 1/4"). Exact-model installation-side evidence: Installation Clearance Sides 1/8"; Installation Clearance | Sides 1/8"

Other evidence found

• 4.25 in — superseded

  77836515.pdf; page 1. Model scope: not separately recorded. Raw value: Door Edge Clearance with Handle 4 1/4". The final reviewed registry supersedes this earlier audit value. Corrected prior semantic mismatch 4.25 in (Door Edge Clearance with Handle 4 1/4"). Exact-model installation-side evidence: Installation Clearance Sides 1/8"; Installation Clearance | Sides 1/8"

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.