Measurement evidence for KitchenAid KRFF436SBE

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-chassis variant propagation from KRFF436SJP

Confidence label: high.

Primary evidence

30 Cu. Ft. 36-Inch French Door Refrigerator with Exterior Water and Ice Dispenser and Wood-Look Sliding Tray in Juniper Juniper KRFF436SJP | KitchenAid
KitchenAid · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Sibling-chassis propagation from KRFF436SJP; model codes have the same numeric skeleton, at least fo
Reviewed: 2026-09-04

Sibling-chassis propagation from KRFF436SJP; model codes have the same numeric skeleton, at least four existing chassis dimensions match, and no structural dimensions conflict. Sibling evidence: net Width: 35.94 in | on of Home Appliance Manufacturers) Sustainability Standards ### Dimensions Cabinet Width 35.938 in Capacity 29.51 cu. ft. Common Size 36 in Cutout Height 70.188 in Cutout Width 3

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 35.94 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

KitchenAid 30 cu. ft. French Door Refrigerator KRFF436SBE | Shop Appliances
www.shopappliances.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: r-Depth | No | | Height | | Height | 70 1/15" | | Height without Hinges | 69" | ## KitchenAid KRFF43
Reviewed: 2026-09-04

r-Depth | No | | Height | | Height | 70 1/15" | | Height without Hinges | 69" | ## KitchenAid KRFF436SBE Overview 30 cu. ft. Fr

Why this value was used

r-Depth | No | | Height | | Height | 70 1/15" | | Height without Hinges | 69" | ## KitchenAid KRFF436SBE Overview 30 cu. ft. Fr

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.0625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

36 in. 30 cu. ft. Standard Depth French Door Refrigerator in ...
www.homedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height to Top of Door Hinge = 70.0625 in | 36 in. 30 cu. ft. Standard Depth French Door Refrigerator
Reviewed: 2026-09-04

Height to Top of Door Hinge = 70.0625 in | 36 in. 30 cu. ft. Standard Depth French Door Refrigerator in ... Height to Top of Door Hinge (in.) 70.0625 in. Height to Top of Refrigerator Case (in.) 69 in. Height to Top of Refrigerator D

Why this value was used

Height to Top of Door Hinge = 70.0625 in | 36 in. 30 cu. ft. Standard Depth French Door Refrigerator in ... Height to Top of Door Hinge (in.) 70.0625 in. Height to Top of Refrigerator Case (in.) 69 in. Height to Top of Refrigerator D

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KRFF436SBE Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

F Depth without doors -> 297/8" (758.8 mm)

Why this value was used

F Depth without doors -> 297/8" (758.8 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

34.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KRFF436SBE Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

E Depth with doors -> 34 3/4" (882.3 mm)

Why this value was used

E Depth with doors -> 34 3/4" (882.3 mm)

Other evidence found

• 90 in — superseded

  https://www.shopappliances.com/products/kitchenaid-krff436sbe; location not retained. Model scope: not separately recorded. Raw value: depth without handles : Depth with Door Opened at 90 Degrees . The final reviewed registry supersedes this earlier audit value. E Depth with doors -> 34 3/4" (882.3 mm)

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

37.4375 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KRFF436SBE Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Depth with door handle -> 377/16"(951.3 mm)

Why this value was used

Depth with door handle -> 377/16"(951.3 mm)

Other evidence found

• 90 in — superseded

  https://www.abcwarehouse.com/kitchenaid-krff436sbe; location not retained. Model scope: not separately recorded. Raw value: product depth : Depth With Door Open 90 Degree . The final reviewed registry supersedes this earlier audit value. Depth with door handle -> 377/16"(951.3 mm)

  Open alternative source ↗
• 90 in — superseded

  https://www.abcwarehouse.com/kitchenaid-krff436sbe; location not retained. Model scope: not separately recorded. Raw value: product depth : Depth With Door Open 90 Degree . The final reviewed registry supersedes this earlier audit value. Depth with door handle -> 377/16"(951.3 mm)

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

KitchenAid KRFF436SBE French Door Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: /500 in | | Depth Excluding Doors | 29-7/8 in | | Depth With Door Open 90 Degree | 49 in | | Freezer
Reviewed: 2026-09-04

/500 in | | Depth Excluding Doors | 29-7/8 in | | Depth With Door Open 90 Degree | 49 in | | Freezer Capacity Volume | 9.01 cu. ft. | | Gr

Why this value was used

/500 in | | Depth Excluding Doors | 29-7/8 in | | Depth With Door Open 90 Degree | 49 in | | Freezer Capacity Volume | 9.01 cu. ft. | | Gr

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36.1875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

KitchenAid French Door Refrigeration KRFF436SBE | Voss TV & Appliance in Pittsburgh, PA
www.vosstv.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact model specification table: Cutout Width 36.188 in; normalized to 36 3/16 in
Reviewed: 2026-09-04

Exact model specification table: Cutout Width 36.188 in; normalized to 36 3/16 in

Why this value was used

Exact model specification table: Cutout Width 36.188 in; normalized to 36 3/16 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.5625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

KitchenAid KRFF436SBE Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 70.0625 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 70.0625 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

KRFF436SBE KitchenAid French Door Refrigerator 36 inch 30 cu. ft. Canada - Sale! Best Price, Reviews and Specs
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening depth derived from case-only depth 29.875 in plus documented rear clearance 2.0 in.
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 29.875 in plus documented rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 29.875 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KRFF436SBE KitchenAid French Door Refrigerator 36 inch 30 cu. ft. Canada - Sale! Best Price, Reviews and Specs
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached specification: Side Clearance = 0.5 in | en fully extended | | Rear Clearance for
Reviewed: 2026-09-05

Exact-model cached specification: Side Clearance = 0.5 in | en fully extended | | Rear Clearance for Water Line / Power Cord | 2 inches | | Side Clearance | 1/2 inch | | Top Clearance | 1/2 inch | | Back Clearance | 2 inches | | Minimum Cleara

Why this value was used

Exact-model cached specification: Side Clearance = 0.5 in | en fully extended | | Rear Clearance for Water Line / Power Cord | 2 inches | | Side Clearance | 1/2 inch | | Top Clearance | 1/2 inch | | Back Clearance | 2 inches | | Minimum Cleara

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KRFF436SBE KitchenAid French Door Refrigerator 36 inch 30 cu. ft. Canada - Sale! Best Price, Reviews and Specs
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached specification: Side Clearance = 0.5 in | en fully extended | | Rear Clearance for
Reviewed: 2026-09-05

Exact-model cached specification: Side Clearance = 0.5 in | en fully extended | | Rear Clearance for Water Line / Power Cord | 2 inches | | Side Clearance | 1/2 inch | | Top Clearance | 1/2 inch | | Back Clearance | 2 inches | | Minimum Cleara

Why this value was used

Exact-model cached specification: Side Clearance = 0.5 in | en fully extended | | Rear Clearance for Water Line / Power Cord | 2 inches | | Side Clearance | 1/2 inch | | Top Clearance | 1/2 inch | | Back Clearance | 2 inches | | Minimum Cleara

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: resolved fraction/unit/scenario semantics from cached full-page evidence

Confidence label: high.

Primary evidence

KitchenAid KRFF436SBE Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

full-page adjudication=0.5; parser candidates=[0.492, 0.098]; 12.5 mm) space on each side and at the top

Why this value was used

full-page adjudication=0.5; parser candidates=[0.492, 0.098]; 12.5 mm) space on each side and at the top

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

KRFF436SBE KitchenAid French Door Refrigerator 36 inch 30 cu. ft. Canada - Sale! Best Price, Reviews and Specs
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Back Clearance 2 inches
Reviewed: 2026-09-05

Back Clearance 2 inches

Why this value was used

Back Clearance 2 inches

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: resolved fraction/unit/scenario semantics from cached full-page evidence

Confidence label: high.

Primary evidence

KitchenAid KRFF336SPS Owner's Manual
assets.skulytics.io · Owner's Manual
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

full-page adjudication=3.75; parser candidates=[3.74, 3.75]; next to a fixed wall, leave a 3 3/4" (9.5 cm

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 3.75 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: same-chassis variant propagation from KRFF436SJP

Confidence label: high.

Primary evidence

30 Cu. Ft. 36-Inch French Door Refrigerator with Exterior Water and Ice Dispenser and Wood-Look Sliding Tray in Juniper Juniper KRFF436SJP | KitchenAid
KitchenAid · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Sibling-chassis propagation from KRFF436SJP; model codes have the same numeric skeleton, at least fo
Reviewed: 2026-09-04

Sibling-chassis propagation from KRFF436SJP; model codes have the same numeric skeleton, at least four existing chassis dimensions match, and no structural dimensions conflict. Sibling evidence: Cabinet Width: 35.94 in | iation of Home Appliance Manufacturers) Sustainability Standards ### Dimensions Cabinet Width 35.938 in Capacity 29.51 cu. ft. Common Size 36 in Cutout Height 70.188 in Cutout Width 3

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 35.94 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

0.5 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

KRFF436SBE KitchenAid French Door Refrigerator 36 inch 30 cu. ft. Canada - Sale! Best Price, Reviews and Specs
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached specification: Side Clearance = 0.5 in | en fully extended | | Rear Clearance for
Reviewed: 2026-09-04

Exact-model cached specification: Side Clearance = 0.5 in | en fully extended | | Rear Clearance for Water Line / Power Cord | 2 inches | | Side Clearance | 1/2 inch | | Top Clearance | 1/2 inch | | Back Clearance | 2 inches | | Minimum Cleara

Why this value was used

Exact-model cached specification: Side Clearance = 0.5 in | en fully extended | | Rear Clearance for Water Line / Power Cord | 2 inches | | Side Clearance | 1/2 inch | | Top Clearance | 1/2 inch | | Back Clearance | 2 inches | | Minimum Cleara

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.