Measurement evidence for KitchenAid KRFC336SBE

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to KitchenAid KRFC336SBE fit check Check this model against your opening How ExactFit verifies measurements

KitchenAid KRFC336SBE

Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Incomplete evidence

0exact-model manufacturer values

0verified equivalent/same-chassis values

11secondary-source-only values

5values with unresolved source details

Last reviewed: 2026-09-05. 3 retained source records. 0 unresolved conflicts. Not every fit-critical input is supported.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

ExactFit does not have sufficient evidence for every fit-critical measurement. The fit checker will return Uncertain unless a known measurement already proves that the model does not fit.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location	Details
Overall width	35.625 in	✓ Secondary source only	KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 35.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Aligned with case_width_in (35.625") Open original source ↗ Why this value was used Aligned with case_width_in (35.625") Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	70.875 in	✓ Secondary source only	KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 70.875 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Height to top of cabinet 707/8" (180 cm) Open original source ↗ Why this value was used Height to top of cabinet 707/8" (180 cm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	71.875 in	✓ Secondary source only	KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 71.875 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Overall Height 717/8" (182.6 cm) Open original source ↗ Why this value was used Overall Height 717/8" (182.6 cm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	25 in	✓ Secondary source only	KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 25 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Depth without doors 25" (63.5 cm) Open original source ↗ Why this value was used Depth without doors 25" (63.5 cm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	29.4375 in	✓ Secondary source only	KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 29.4375 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Depth without handles 297/16" (74.85 cm) Open original source ↗ Why this value was used Depth without handles 297/16" (74.85 cm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	32.1875 in	✓ Secondary source only	KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 32.1875 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Depth with handles 323/16" (81.74 cm) Open original source ↗ Why this value was used Depth with handles 323/16" (81.74 cm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	44.25 in	✓ Secondary source only	KitchenAid-Black-French KRFC336SBE \| Appliance Canada www.appliancecanada.com	Retained specification excerpt: Depth With Door Open 90° = 44.25 in \| or Higher \| Popular Width: 36" Wide \| Depth Closed Excluding
Value used by ExactFit 44.25 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence KitchenAid-Black-French KRFC336SBE \| Appliance Canada www.appliancecanada.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth With Door Open 90° = 44.25 in \| or Higher \| Popular Width: 36" Wide \| Depth Closed Excluding Reviewed: 2026-09-04 Depth With Door Open 90° = 44.25 in \| or Higher \| Popular Width: 36" Wide \| Depth Closed Excluding Handles: 29.44" \| Depth With Door Open 90°: 44.25" \| Cabinet Width: 35.63" \| Cutout Width: 36.0" \| \| independent cached support: appliancecanada.com, handyappliances.ca Open original source ↗ Why this value was used Depth With Door Open 90° = 44.25 in \| or Higher \| Popular Width: 36" Wide \| Depth Closed Excluding Handles: 29.44" \| Depth With Door Open 90°: 44.25" \| Cabinet Width: 35.63" \| Cutout Width: 36.0" \| \| independent cached support: appliancecanada.com, handyappliances.ca Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	36 in	✓ Secondary source only	KitchenAid-Black-French KRFC336SBE \| Appliance Canada www.appliancecanada.com	Retained specification excerpt: Exact model specification table: Cutout Width 36.0 in
Value used by ExactFit 36 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence KitchenAid-Black-French KRFC336SBE \| Appliance Canada www.appliancecanada.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Exact model specification table: Cutout Width 36.0 in Reviewed: 2026-09-04 Exact model specification table: Cutout Width 36.0 in Open original source ↗ Why this value was used Exact model specification table: Cutout Width 36.0 in Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	Unknown	? Not found · Calculated/inferred	KitchenAid measurement source — https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf KitchenAid	Page 2
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence KitchenAid measurement source — https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf KitchenAid · Web source Model scope: Not established Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Minimum opening height derived from highest stored appliance endpoint 71.875 in plus documented top clearance 0.25 in. Open original source ↗ Why this value was used A required calculation input lacks defensible evidence. Retained research value: 72.125 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	Unknown	? Not found · Calculated/inferred	KitchenAid measurement source — https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf KitchenAid	Page 2
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence KitchenAid measurement source — https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf KitchenAid · Web source Model scope: Not established Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Minimum opening depth derived from case-only depth 25.0 in plus documented rear clearance 1.0 in. Open original source ↗ Why this value was used A required calculation input lacks defensible evidence. Retained research value: 26 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	Unknown	? Not found · Calculated/inferred	KitchenAid measurement source — https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf KitchenAid	Page 2
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: identical 8-dimension chassis signature; propagated from KRFC736SPS Confidence label: medium. Primary evidence KitchenAid measurement source — https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf KitchenAid · Web source Model scope: Not established Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Conflict-free identical-chassis propagation from KitchenAid KRFC736SPS: side_ventilation_clearance_in=0.1875 in. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 0.1875 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	Unknown	? Not found · Calculated/inferred	KitchenAid measurement source — https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf KitchenAid	Page 2
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: identical 8-dimension chassis signature; propagated from KRFC736SPS Confidence label: medium. Primary evidence KitchenAid measurement source — https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf KitchenAid · Web source Model scope: Not established Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Conflict-free identical-chassis propagation from KitchenAid KRFC736SPS: side_ventilation_clearance_in=0.1875 in. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 0.1875 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	Unknown	? Not found · Calculated/inferred	KitchenAid measurement source — https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf KitchenAid	Page 2
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: identical 8-dimension chassis signature; propagated from KRFC736SPS Confidence label: medium. Primary evidence KitchenAid measurement source — https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf KitchenAid · Web source Model scope: Not established Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Conflict-free identical-chassis propagation from KitchenAid KRFC736SPS: top_clearance_in=0.25 in. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 0.25 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	Unknown	? Not found · Calculated/inferred	KitchenAid measurement source — https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf KitchenAid	Page 2
Value used by ExactFit Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: identical 8-dimension chassis signature; propagated from KRFC736SPS Confidence label: medium. Primary evidence KitchenAid measurement source — https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf KitchenAid · Web source Model scope: Not established Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 Conflict-free identical-chassis propagation from KitchenAid KRFC736SPS: rear_clearance_in=1.0 in. Open original source ↗ Why this value was used The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning. Retained research value: 1 in. It is preserved for audit but not accepted as a safe fit input. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	3.75 in	✓ Secondary source only · Calculated/inferred	KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io	Page 2
Value used by ExactFit 3.75 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document Confidence label: medium. Primary evidence KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05 next to a fixed wall, leave a 33/4" (9.5 cm Open original source ↗ Why this value was used next to a fixed wall, leave a 33/4" (9.5 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	35.625 in	✓ Secondary source only	KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io	Page 1
Value used by ExactFit 35.625 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04 Width of cabinet 355/8" (90.5 cm) Open original source ↗ Why this value was used Width of cabinet 355/8" (90.5 cm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	0.1875 in	✓ Secondary source only	KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io	Page 2
Value used by ExactFit 0.1875 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence KitchenAid KRFC336SBE Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04 allow for 3/16" (0.48 cm) space on each side Open original source ↗ Why this value was used allow for 3/16" (0.48 cm) space on each side Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Measurements not established

Minimum cutout height

Not found for safe fit use. Sources retained: https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf. Related-model record: KRFC336SBE.

A required calculation input lacks defensible evidence.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Minimum cutout depth

Not found for safe fit use. Sources retained: https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf. Related-model record: KRFC336SBE.

A required calculation input lacks defensible evidence.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Left-side ventilation clearance

Not found for safe fit use. Sources retained: https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf. Related-model record: KRFC336SBE.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Right-side ventilation clearance

Not found for safe fit use. Sources retained: https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf. Related-model record: KRFC336SBE.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Top clearance

Not found for safe fit use. Sources retained: https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf. Related-model record: KRFC336SBE.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Rear clearance

Not found for safe fit use. Sources retained: https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf. Related-model record: KRFC336SBE.

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

An unknown required input can make the fit result Uncertain. Confirm the current exact-model installation document before purchase.

Source documents and pages

KitchenAid KRFC336SBE Dimension Guide

assets.skulytics.io · Dimension Guide · secondary model/source

Model numbers covered: KRFC336SBE. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

9 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle; Hinge-side wall clearance; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

KitchenAid-Black-French KRFC336SBE | Appliance Canada

www.appliancecanada.com · Web source · secondary model/source

Model numbers covered: KRFC336SBE. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

2 displayed measurements supported: Depth with doors open at 90°; Minimum cutout width.

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

KitchenAid measurement source — https://www.kitchenaid.com/content/dam/global/documents/202505/dimension-guide-w11778216-reva.pdf

KitchenAid · Web source · Scope not established

Model numbers covered: KRFC336SBE. Publication/revision date: Not recorded. Reviewed: 2026-09-05.

6 displayed measurements supported: Minimum cutout height; Minimum cutout depth; Left-side ventilation clearance; Right-side ventilation clearance; Top clearance; Rear clearance.

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

Report a problem with this model Check whether KRFC336SBE fits your opening Back to KitchenAid KRFC336SBE Read the full verification methodology

Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.