Measurement evidence for KitchenAid KBSN748SBE

Value used by ExactFit

47.1875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KBSN748SBE Installation Instructions
assets.skulytics.io · Installation Instructions
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-04

Overall Width -> 473∕16" (1199 mm)

Why this value was used

Overall Width -> 473∕16" (1199 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KBSN748SPS Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 4
Reviewed: 2026-09-04

Visual side-view table: Cabinet Height = 74 3/8 in.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 74.375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

• 83.25 in — superseded

  106162500.pdf (p.8); page 8. Model scope: not separately recorded. Raw value: Overall Height -> 831∕4" (2115 mm). The final reviewed registry supersedes this earlier audit value. Visual side-view table: Cabinet Height = 74 3/8 in.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

83.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KBSN748SBE Installation Instructions
assets.skulytics.io · Installation Instructions
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-04

Overall Height -> 831∕4" (2115 mm)

Why this value was used

Overall Height -> 831∕4" (2115 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

22.4 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

KBSN748SBE KitchenAid Refrigerators | Jordan's
www.jordanswarehousedivision.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors = 22.4 in | KBSN748SBE KitchenAid Refrigerators | Jordan's Cutout Width: 47.5"
Reviewed: 2026-09-04

Depth Excluding Doors = 22.4 in | KBSN748SBE KitchenAid Refrigerators | Jordan's Cutout Width: 47.5" • Depth Excluding Doors: 22.4" • Height To Top Of Cabinet: 74.5" • Depth With Door Open 90 Degree: 50.69". Shi

Why this value was used

Depth Excluding Doors = 22.4 in | KBSN748SBE KitchenAid Refrigerators | Jordan's Cutout Width: 47.5" • Depth Excluding Doors: 22.4" • Height To Top Of Cabinet: 74.5" • Depth With Door Open 90 Degree: 50.69". Shi

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

25.8125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KBSN748SBE Installation Instructions
assets.skulytics.io · Installation Instructions
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-04

Depth without Handle -> 2513∕16" (655 mm)

Why this value was used

Depth without Handle -> 2513∕16" (655 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

27.8125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KBSN748SBE Installation Instructions
assets.skulytics.io · Installation Instructions
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-04

Depth with Handle -> 2713∕16" (706 mm)

Why this value was used

Depth with Handle -> 2713∕16" (706 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

50.69 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

KBSN748SBE KitchenAid Refrigerators | Jordan's
www.jordanswarehousedivision.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth With Door Open 90 = 50.69 in | Width: 47.5" • Depth Excluding Doors: 22.4" • Height To Top Of
Reviewed: 2026-09-04

Depth With Door Open 90 = 50.69 in | Width: 47.5" • Depth Excluding Doors: 22.4" • Height To Top Of Cabinet: 74.5" • Depth With Door Open 90 Degree: 50.69". Shipping Dimensions. Width

Why this value was used

Depth With Door Open 90 = 50.69 in | Width: 47.5" • Depth Excluding Doors: 22.4" • Height To Top Of Cabinet: 74.5" • Depth With Door Open 90 Degree: 50.69". Shipping Dimensions. Width

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KBSN748SBE Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-04

Model Total Opening Width (W) Width Between Cleats (X) -> 48" 491/4" to 491/2" (1251 mm to 1257 mm) 471/2" to 473/4" (1207 mm to 1213 mm)

Why this value was used

Model Total Opening Width (W) Width Between Cleats (X) -> 48" 491/4" to 491/2" (1251 mm to 1257 mm) 471/2" to 473/4" (1207 mm to 1213 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

83.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

KitchenAid KBSN748SBE Side-by-Side Refrigerators
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cutout Height 83-1/2 in
Reviewed: 2026-09-05

Cutout Height 83-1/2 in

Why this value was used

Cutout Height 83-1/2 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

KitchenAid KBSN748SBE Side-by-Side Refrigerators
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cutout Depth 25 in
Reviewed: 2026-09-05

Cutout Depth 25 in

Why this value was used

Cutout Depth 25 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p
Reviewed: 2026-09-05

Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.188 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p
Reviewed: 2026-09-05

Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.188 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KBSN748SBE Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 6
Reviewed: 2026-09-05

Exact-model installation guide: A clearance of 3/4" (19 mm) must be maintained above the top grille.

Why this value was used

Exact-model installation guide: A clearance of 3/4" (19 mm) must be maintained above the top grille.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.6 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: min_cutout_depth_in - depth_case_only_in

Confidence label: medium.

Calculation inputs: Depth without door; Minimum cutout depth;

Primary evidence

KitchenAid KBSN748SBE Side-by-Side Refrigerators
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: KitchenAid built-in opening residual: 25.0 - 22.4 = 2.6 in behind the case within the accepted openi
Reviewed: 2026-09-05

KitchenAid built-in opening residual: 25.0 - 22.4 = 2.6 in behind the case within the accepted opening.

Why this value was used

KitchenAid built-in opening residual: 25.0 - 22.4 = 2.6 in behind the case within the accepted opening. Calculation or inference: min_cutout_depth_in - depth_case_only_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: full-size KitchenAid built-in hinge platform minimum

Confidence label: medium.

Primary evidence

KitchenAid KBSN748TPA Installation Instruction
assets.skulytics.io · Installation Instruction
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

KitchenAid built-in door-swing guide: allow 4 1/2" minimum between the refrigerator side and a corner wall; more may be needed for custom panels or extended handles.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 4.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

47.1875 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KBSN748SBE Installation Instructions
assets.skulytics.io · Installation Instructions
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 8
Reviewed: 2026-09-04

Overall Width -> 473∕16" (1199 mm)

Why this value was used

Overall Width -> 473∕16" (1199 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Tall built-in family side clearance

Confidence label: low.

Primary evidence

KitchenAid measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p
Reviewed: 2026-09-04

Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 0.1875 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.