Measurement evidence for KitchenAid KBFN542SBE

Value used by ExactFit

41.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

24.2 Cu. Ft. 42-Inch Built-In French Door Bottom Mount Refrigerator with Signature Platinum Interior in Black Ore Black Ore KBFN542SBE | KitchenAid
KitchenAid · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: net Width = 41.5 in. Context: guration Refrigerator
Reviewed: 2026-09-04

Reviewed cached exact-model manufacturer label: net Width = 41.5 in. Context: guration Refrigerator Refrigerator Type Built-In French Door ### Dimensions Cabinet Width 41.5 in Capacity 24.2 cu. ft. Cutout Depth 24 in Cutout Height 83.5 in Cutout Width 41.

Why this value was used

Reviewed cached exact-model manufacturer label: net Width = 41.5 in. Context: guration Refrigerator Refrigerator Type Built-In French Door ### Dimensions Cabinet Width 41.5 in Capacity 24.2 cu. ft. Cutout Depth 24 in Cutout Height 83.5 in Cutout Width 41.

Other evidence found

• 41.1875 in — superseded

  106162549.pdf (p.2); page 2. Model scope: not separately recorded. Raw value: Overall Width -> 413∕16" (1046.7 mm). The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: net Width = 41.5 in. Context: guration Refrigerator Refrigerator Type Built-In French Door ### Dimensions Cabinet Width 41.5 in Capacity 24.2 cu. ft. Cutout Depth 24 in Cutout Height 83.5 in Cutout Width 41.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KBFN542SPS Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 4
Reviewed: 2026-09-04

Visual side-view table: Cabinet Height = 74 1/4 in.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 74.25 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

• 83.1875 in — superseded

  106162549.pdf (p.2); page 2. Model scope: not separately recorded. Raw value: Overall Height -> 833∕16" (2113.5 mm). The final reviewed registry supersedes this earlier audit value. Visual side-view table: Cabinet Height = 74 1/4 in.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

83.1875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KBFN542SBE Quick Start Guide
assets.skulytics.io · Quick Start Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Overall Height -> 833∕16" (2113.5 mm)

Why this value was used

Overall Height -> 833∕16" (2113.5 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

23.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

24.2 Cu. Ft. 42-Inch Built-In French Door Bottom Mount Refrigerator with Signature Platinum Interior in Black Ore Black Ore KBFN542SBE | KitchenAid
KitchenAid · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors 23.375 in
Reviewed: 2026-09-04

Depth Excluding Doors 23.375 in

Why this value was used

Depth Excluding Doors 23.375 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

25.75 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KBFN542SBE Quick Start Guide
assets.skulytics.io · Quick Start Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Depth without Handle -> 253∕4" (654.7 mm)

Why this value was used

Depth without Handle -> 253∕4" (654.7 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

27.8125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KBFN542SBE Quick Start Guide
assets.skulytics.io · Quick Start Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-04

Depth with Handle -> 2713∕16" (706 mm)

Why this value was used

Depth with Handle -> 2713∕16" (706 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

44.25 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

24.2 Cu. Ft. 42-Inch Built-In French Door Bottom Mount Refrigerator with Signature Platinum Interior in Black Ore Black Ore KBFN542SBE | KitchenAid
KitchenAid · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth With Door Open 90 Degree 44.25 in
Reviewed: 2026-09-04

Depth With Door Open 90 Degree 44.25 in

Why this value was used

Depth With Door Open 90 Degree 44.25 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

43.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KBFN542SBE Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-04

Model Total Opening Width (W) Width Between Cleats (X) -> 42" 431/4" to 431/2" (1098 mm to 1105 mm) 411/2" to 413/4" (1054 mm to 1061 mm)

Why this value was used

Model Total Opening Width (W) Width Between Cleats (X) -> 42" 431/4" to 431/2" (1098 mm to 1105 mm) 411/2" to 413/4" (1054 mm to 1061 mm)

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

83.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

24.2 Cu. Ft. 42-Inch Built-In French Door Bottom Mount Refrigerator with Signature Platinum Interior in Black Ore Black Ore KBFN542SBE | KitchenAid
KitchenAid · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cutout Height 83.5 in
Reviewed: 2026-09-05

Cutout Height 83.5 in

Why this value was used

Cutout Height 83.5 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

24.2 Cu. Ft. 42-Inch Built-In French Door Bottom Mount Refrigerator with Signature Platinum Interior in Black Ore Black Ore KBFN542SBE | KitchenAid
KitchenAid · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cutout Depth 24 in
Reviewed: 2026-09-05

Cutout Depth 24 in

Why this value was used

Cutout Depth 24 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p
Reviewed: 2026-09-05

Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.188 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p
Reviewed: 2026-09-05

Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.188 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.75 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid KBFN542SBE Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 6
Reviewed: 2026-09-05

Exact-model installation guide: A clearance of 3/4" (19 mm) must be maintained above the top grille.

Why this value was used

Exact-model installation guide: A clearance of 3/4" (19 mm) must be maintained above the top grille.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: min_cutout_depth_in - depth_case_only_in

Confidence label: medium.

Calculation inputs: Depth without door; Minimum cutout depth;

Primary evidence

24.2 Cu. Ft. 42-Inch Built-In French Door Bottom Mount Refrigerator with Signature Platinum Interior in Black Ore Black Ore KBFN542SBE | KitchenAid
KitchenAid · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: KitchenAid built-in opening residual: 24.0 - 23.375 = 0.625 in behind the case within the accepted o
Reviewed: 2026-09-05

KitchenAid built-in opening residual: 24.0 - 23.375 = 0.625 in behind the case within the accepted opening.

Why this value was used

KitchenAid built-in opening residual: 24.0 - 23.375 = 0.625 in behind the case within the accepted opening. Calculation or inference: min_cutout_depth_in - depth_case_only_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: full-size KitchenAid built-in hinge platform minimum

Confidence label: medium.

Primary evidence

KitchenAid KBSN748TPA Installation Instruction
assets.skulytics.io · Installation Instruction
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

KitchenAid built-in door-swing guide: allow 4 1/2" minimum between the refrigerator side and a corner wall; more may be needed for custom panels or extended handles.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 4.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

41.5 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

KitchenAid measurement source — https://www.kitchenaid.com/
KitchenAid · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Official exact-model page: Cabinet Width 41.5 in.
Reviewed: 2026-09-04

Official exact-model page: Cabinet Width 41.5 in.

Why this value was used

Official exact-model page: Cabinet Width 41.5 in.

Other evidence found

• 41.1875 in — superseded

  106162549.pdf (p.2); page 2. Model scope: not separately recorded. Raw value: Overall Width -> 413∕16" (1046.7 mm). The final reviewed registry supersedes this earlier audit value. Official exact-model page: Cabinet Width 41.5 in.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Tall built-in family side clearance

Confidence label: low.

Primary evidence

KitchenAid measurement source — local-cache manufacturer-family consensus
Publisher not recorded · Retained document
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification p
Reviewed: 2026-09-04

Inferred 0.1875 in per-side installation clearance from dominant manufacturer-family specification pattern.

The original source link has not yet been recovered from the retained records. This is a link-recovery gap, not a missing measurement. The final registry-verified value and audit text remain available above.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 0.1875 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.