This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)
Last reviewed: 2026-09-05. 2 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
| Measurement | Value used | Evidence status | Primary source | Location | Details |
|---|---|---|---|---|---|
| Overall width | 36 in | ✓ Verified — exact model | Kenmore measurement source — 51805.html Kenmore | Retained specification excerpt: Official Kenmore structured product specification. | |
Value used by ExactFit36 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKenmore measurement source — 51805.html Official Kenmore structured product specification.Open original source ↗ Why this value was usedOfficial Kenmore structured product specification. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Cabinet height | 68.97 in | ✓ Verified — exact model | Kenmore measurement source — 51805.html Kenmore | Retained specification excerpt: Official Kenmore structured product specification. | |
Value used by ExactFit68.97 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKenmore measurement source — 51805.html Official Kenmore structured product specification.Open original source ↗ Why this value was usedOfficial Kenmore structured product specification. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Height with hinge / controlling height | 70 in | ✓ Conflicting sources — resolved | Kenmore measurement source — 51805.html Kenmore | Retained specification excerpt: Official Kenmore structured product specification. | |
Value used by ExactFit70 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKenmore measurement source — 51805.html Official Kenmore structured product specification.Open original source ↗ Why this value was usedOfficial Kenmore structured product specification. Other evidence found
Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth without door | 24.02 in | ✓ Verified — exact model | Kenmore measurement source — 51805.html Kenmore | Retained specification excerpt: Official Kenmore structured product specification. | |
Value used by ExactFit24.02 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKenmore measurement source — 51805.html Official Kenmore structured product specification.Open original source ↗ Why this value was usedOfficial Kenmore structured product specification. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth with door, without handles | 27.64 in | ✓ Verified — exact model | Kenmore measurement source — 51805.html Kenmore | Retained specification excerpt: Official Kenmore structured product specification. | |
Value used by ExactFit27.64 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKenmore measurement source — 51805.html Official Kenmore structured product specification.Open original source ↗ Why this value was usedOfficial Kenmore structured product specification. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with handle | 30.24 in | ✓ Verified — exact model | Kenmore measurement source — 51805.html Kenmore | Retained specification excerpt: Official Kenmore structured product specification. | |
Value used by ExactFit30.24 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKenmore measurement source — 51805.html Official Kenmore structured product specification.Open original source ↗ Why this value was usedOfficial Kenmore structured product specification. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with doors open at 90° | 45.74 in | ✓ Conflicting sources — resolved | Kenmore measurement source — 51805.html Kenmore | Retained specification excerpt: Official Kenmore structured product specification. | |
Value used by ExactFit45.74 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKenmore measurement source — 51805.html Official Kenmore structured product specification.Open original source ↗ Why this value was usedOfficial Kenmore structured product specification. Other evidence found
Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Minimum cutout width | 44 in | ✓ Secondary source only · Calculated/inferred | Kenmore A123384796 User Manual assets.skulytics.io | Page 10 | |
Value used by ExactFit44 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: 36.0 + 2 * 4.0 Confidence label: medium. Primary evidenceKenmore A123384796 User Manual Exact width plus the manual's required 4-in clearance on both sides.Open original source ↗ Why this value was usedExact width plus the manual's required 4-in clearance on both sides. Calculation or inference: 36.0 + 2 * 4.0. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout height | 74 in | ✓ Secondary source only · Calculated/inferred | Kenmore A123384796 User Manual assets.skulytics.io | Page 10 | |
Value used by ExactFit74 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidenceKenmore A123384796 User Manual Minimum opening height is the verified highest appliance endpoint plus the documented top clearance.Open original source ↗ Why this value was usedMinimum opening height is the verified highest appliance endpoint plus the documented top clearance. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout depth | 28.02 in | ✓ Secondary source only · Calculated/inferred | Kenmore A123384796 User Manual assets.skulytics.io | Page 10 | |
Value used by ExactFit28.02 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidenceKenmore A123384796 User Manual Minimum opening depth is the verified cabinet depth plus the documented rear clearance.Open original source ↗ Why this value was usedMinimum opening depth is the verified cabinet depth plus the documented rear clearance. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Left-side ventilation clearance | 4 in | ✓ Secondary source only | Kenmore A123384796 User Manual assets.skulytics.io | Page 10 | |
Value used by ExactFit4 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: Migrated from side_clearance_wall_in by documented endpoint semantics Confidence label: high. Primary evidenceKenmore A123384796 User Manual Legacy reviewed field migration; endpoint indicators=['both sides']; Diagram requires 4 in on both sides.Open original source ↗ Why this value was usedLegacy reviewed field migration; endpoint indicators=['both sides']; Diagram requires 4 in on both sides. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Right-side ventilation clearance | 4 in | ✓ Secondary source only | Kenmore A123384796 User Manual assets.skulytics.io | Page 10 | |
Value used by ExactFit4 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: Migrated from side_clearance_wall_in by documented endpoint semantics Confidence label: high. Primary evidenceKenmore A123384796 User Manual Legacy reviewed field migration; endpoint indicators=['both sides']; Diagram requires 4 in on both sides.Open original source ↗ Why this value was usedLegacy reviewed field migration; endpoint indicators=['both sides']; Diagram requires 4 in on both sides. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Top clearance | 4 in | ✓ Secondary source only | Kenmore A123384796 User Manual assets.skulytics.io | Page 10 | |
Value used by ExactFit4 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKenmore A123384796 User Manual Exact-model manufacturer installation diagram specifies 4 in surrounding clearance.Open original source ↗ Why this value was usedExact-model manufacturer installation diagram specifies 4 in surrounding clearance. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Rear clearance | 4 in | ✓ Secondary source only | Kenmore A123384796 User Manual assets.skulytics.io | Page 10 | |
Value used by ExactFit4 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKenmore A123384796 User Manual Exact-model manufacturer installation diagram specifies 4 in surrounding clearance.Open original source ↗ Why this value was usedExact-model manufacturer installation diagram specifies 4 in surrounding clearance. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Hinge-side wall clearance | 4 in | ✓ Secondary source only | Kenmore A123384796 User Manual assets.skulytics.io | Page 10 | |
Value used by ExactFit4 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKenmore A123384796 User Manual Exact-model manufacturer installation diagram specifies 4 in surrounding clearance.Open original source ↗ Why this value was usedExact-model manufacturer installation diagram specifies 4 in surrounding clearance. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Cabinet case width | 36 in | ✓ Verified — exact model · Calculated/inferred | Kenmore measurement source — 51805.html Kenmore | Retained specification excerpt: No side projections; standardized case width to official closed-door width. | |
Value used by ExactFit36 in · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: case width = exact closed-door width Confidence label: medium. Primary evidenceKenmore measurement source — 51805.html No side projections; standardized case width to official closed-door width.Open original source ↗ Why this value was usedNo side projections; standardized case width to official closed-door width. Calculation or inference: case width = exact closed-door width. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Adjoining-wall clearance (reviewed endpoint) | 4 in | ✓ Secondary source only | Kenmore A123384796 User Manual assets.skulytics.io | Page 10 | |
Value used by ExactFit4 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceKenmore A123384796 User Manual Diagram requires 4 in on both sides.Open original source ↗ Why this value was usedDiagram requires 4 in on both sides. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
Selected: 70 in. Earlier retained values: 90 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Official Kenmore structured product specification.
View source scope, location, and impact on fitSelected: 45.74 in. Earlier retained values: 90 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Official Kenmore structured product specification.
View source scope, location, and impact on fitKenmore · Web source · exact model/source
Model numbers covered: A123384796. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
8 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with door, without handles; Depth with handle; Depth with doors open at 90°; Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · User Manual · secondary model/source
Model numbers covered: A123384796. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
9 displayed measurements supported: Minimum cutout width; Minimum cutout height; Minimum cutout depth; Left-side ventilation clearance; Right-side ventilation clearance; Top clearance; Rear clearance; Hinge-side wall clearance; Adjoining-wall clearance (reviewed endpoint).
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.