Measurement evidence for Electrolux GRSC2352AD

Value used by ExactFit

36.125 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Electrolux GRSC2352AD Product Specifications Sheet
assets.skulytics.io · Product Specifications Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Width 36 1/8"

Why this value was used

Width 36 1/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Electrolux GRSC2352AD Product Specifications Sheet
assets.skulytics.io · Product Specifications Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Height Without Hinge 68 5/8"

Why this value was used

Height Without Hinge 68 5/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Electrolux GRSC2352AD Product Specifications Sheet
assets.skulytics.io · Product Specifications Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Height With Hinge 69 7/8"

Why this value was used

Height With Hinge 69 7/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

23.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Electrolux GRSC2352AD Product Specifications Sheet
assets.skulytics.io · Product Specifications Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Depth of Cabinet 23 7/8"

Why this value was used

Depth of Cabinet 23 7/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.5 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Electrolux GRSC2352AD Product Specifications Sheet
assets.skulytics.io · Product Specifications Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Depth With Door 28 1/2"

Why this value was used

Depth With Door 28 1/2"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

31 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Electrolux GRSC2352AD Product Specifications Sheet
assets.skulytics.io · Product Specifications Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Depth With Door and Handle 31"

Why this value was used

Depth With Door and Handle 31"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

45 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Electrolux GRSC2352AD Product Specifications Sheet
assets.skulytics.io · Product Specifications Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Depth With Door 90° Open 45"

Why this value was used

Depth With Door 90° Open 45"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.875 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Electrolux measurement source — https://www.brandsmartusa.com/products/appliances-refrigerators-counter-depth-grsc2352ad-bs
www.brandsmartusa.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model retailer specification: Cutout Width 35.875 in.
Reviewed: 2026-09-04

Exact-model retailer specification: Cutout Width 35.875 in.

Why this value was used

Exact-model retailer specification: Cutout Width 35.875 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

70.25 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Electrolux GRSC2352AF Complete Owner's Guide
assets.skulytics.io · Complete Owner's Guide
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 69.875 in plus documented top clearance 0.375 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 69.875 in plus documented top clearance 0.375 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24.875 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Frigidaire Professional PRSC2222AF Installation Instructions
assets.skulytics.io · Installation Instructions
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 23.875 in plus propagated rear clearance 1.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 23.875 in plus propagated rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Electrolux GRSC2352AF Complete Owner's Guide
assets.skulytics.io · Complete Owner's Guide
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Manufacturer shared-chassis installation guide: Sides & Top clearance 3/8".

Why this value was used

Manufacturer shared-chassis installation guide: Sides & Top clearance 3/8".

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Electrolux GRSC2352AF Complete Owner's Guide
assets.skulytics.io · Complete Owner's Guide
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Manufacturer shared-chassis installation guide: Sides & Top clearance 3/8".

Why this value was used

Manufacturer shared-chassis installation guide: Sides & Top clearance 3/8".

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Electrolux GRSC2352AF Complete Owner's Guide
assets.skulytics.io · Complete Owner's Guide
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Manufacturer shared-chassis installation guide: Sides & Top clearance 3/8".

Why this value was used

Manufacturer shared-chassis installation guide: Sides & Top clearance 3/8".

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Frigidaire_Professional PRSC2222AF

Confidence label: medium.

Primary evidence

Frigidaire Professional PRSC2222AF Installation Instructions
assets.skulytics.io · Installation Instructions
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

Conflict-free corporate-family exact 8-dimension chassis match to Frigidaire_Professional PRSC2222AF; original evidence: installation, proper air circulation, and plumbing and electrical connections: | Sides & Top: 3/8 in. / Rear: 1 in. | 2 Transporting to Refrigerator Site | deterministic pattern: installation_sides

Why this value was used

Conflict-free corporate-family exact 8-dimension chassis match to Frigidaire_Professional PRSC2222AF; original evidence: installation, proper air circulation, and plumbing and electrical connections: | Sides & Top: 3/8 in. / Rear: 1 in. | 2 Transporting to Refrigerator Site | deterministic pattern: installation_sides Calculation or inference: exact 8-dimension chassis signature; source model Frigidaire_Professional PRSC2222AF.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Electrolux GRSC2352AF Complete Owner's Guide
assets.skulytics.io · Complete Owner's Guide
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Manufacturer manual documents 0.375 in side installation clearance. The hinge-wall note is conditional and gives no separate numeric minimum; the documented side baseline is retained.

Why this value was used

The stored transfer does not identify both a supporting model and measurement-specific equivalence reasoning.

Retained research value: 0.375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.875 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Electrolux GRSC2352AD Product Specifications Sheet
assets.skulytics.io · Product Specifications Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Width of Cabinet 35 7/8"

Why this value was used

Width of Cabinet 35 7/8"

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

0.375 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Electrolux GRSC2352AF Complete Owner's Guide
assets.skulytics.io · Complete Owner's Guide
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-04

Manufacturer shared-chassis installation guide: Sides & Top clearance 3/8".

Why this value was used

Manufacturer shared-chassis installation guide: Sides & Top clearance 3/8".

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.