This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-09-05. 3 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
Measurements and supporting evidence
Measurement
Value used
Evidence status
Primary source
Location
Details
Overall width
35.625 in
✓ Secondary source only
Bosch B36CL81ENW 36 Inch Freestanding French Door Smart Refrigerator with 20.5 cu. ft. Total Capacity, Internal Water Dispenser, UltraClarityPro® Water Filter, and Ice Maker www.ajmadison.com
Retained specification excerpt: Plain exact-model specification row: Width = 35.625 in | ode: Yes Refrigerator Capacity: 14.5 Cu. Ft
Value used by ExactFit
35.625 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Bosch B36CL81ENW 36 Inch Freestanding French Door Smart Refrigerator with 20.5 cu. ft. Total Capacity, Internal Water Dispenser, UltraClarityPro® Water Filter, and Ice Maker www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Plain exact-model specification row: Width = 35.625 in | ode: Yes Refrigerator Capacity: 14.5 Cu. Ft Reviewed: 2026-09-04
Plain exact-model specification row: Width = 35.625 in | ode: Yes Refrigerator Capacity: 14.5 Cu. Ft. Freezer Capacity: 6 Cu. Ft. Total Capacity: 20.5 Cu. Ft. Width: 35 5/8 Inch Depth: 29 Inch Depth with Door at 90°: 43 3/8 Inch Height: 72 Inch WiFi: Yes Smart Accessory Required: No Stainless S
Plain exact-model specification row: Width = 35.625 in | ode: Yes Refrigerator Capacity: 14.5 Cu. Ft. Freezer Capacity: 6 Cu. Ft. Total Capacity: 20.5 Cu. Ft. Width: 35 5/8 Inch Depth: 29 Inch Depth with Door at 90°: 43 3/8 Inch Height: 72 Inch WiFi: Yes Smart Accessory Required: No Stainless S
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Bosch B36CL81ENW 36 Inch Freestanding French Door Smart Refrigerator with 20.5 cu. ft. Total Capacity, Internal Water Dispenser, UltraClarityPro® Water Filter, and Ice Maker www.ajmadison.com
Retained specification excerpt: Height without Hinge = 71.5 in | : BORPLFTR55 90 Degree Door Stopper: 10012733 ## Features [...] Hei
Value used by ExactFit
71.5 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Bosch B36CL81ENW 36 Inch Freestanding French Door Smart Refrigerator with 20.5 cu. ft. Total Capacity, Internal Water Dispenser, UltraClarityPro® Water Filter, and Ice Maker www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Height without Hinge = 71.5 in | : BORPLFTR55 90 Degree Door Stopper: 10012733 ## Features [...] Hei Reviewed: 2026-09-04
Height without Hinge = 71.5 in | : BORPLFTR55 90 Degree Door Stopper: 10012733 ## Features [...] Height: 72 Inch Height without Hinges: 71 1/2 Inch Cutout Width: 36 Inch Cutout Depth: 25 Inch Cutout Height: 72 Inch Cabinet De
Height without Hinge = 71.5 in | : BORPLFTR55 90 Degree Door Stopper: 10012733 ## Features [...] Height: 72 Inch Height without Hinges: 71 1/2 Inch Cutout Width: 36 Inch Cutout Depth: 25 Inch Cutout Height: 72 Inch Cabinet De
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Appliance dimensions with hinges and doors: 72 x 35 5/8 x 29 in
Value used by ExactFit
72 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Bosch measurement source — https://content.abt.com/documents/155840/bosch-800-series-36-fridge-B36CL81ENW-specs.pdf content.abt.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Appliance dimensions with hinges and doors: 72 x 35 5/8 x 29 in Reviewed: 2026-09-04
Appliance dimensions with hinges and doors: 72 x 35 5/8 x 29 in
Appliance dimensions with hinges and doors: 72 x 35 5/8 x 29 in
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Bosch B36CL81ENW 36 Inch Freestanding French Door Smart Refrigerator with 20.5 cu. ft. Total Capacity, Internal Water Dispenser, UltraClarityPro® Water Filter, and Ice Maker www.ajmadison.com
Retained specification excerpt: Inch Cutout Depth: 25 Inch Cutout Height: 72 Inch Cabinet Depth: 24 Inch Shabbos Compliance Sabbath
Value used by ExactFit
24 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Bosch B36CL81ENW 36 Inch Freestanding French Door Smart Refrigerator with 20.5 cu. ft. Total Capacity, Internal Water Dispenser, UltraClarityPro® Water Filter, and Ice Maker www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Inch Cutout Depth: 25 Inch Cutout Height: 72 Inch Cabinet Depth: 24 Inch Shabbos Compliance Sabbath Reviewed: 2026-09-04
Inch Cutout Depth: 25 Inch Cutout Height: 72 Inch Cabinet Depth: 24 Inch Shabbos Compliance Sabbath Mode: Yes Certificat
Inch Cutout Depth: 25 Inch Cutout Height: 72 Inch Cabinet Depth: 24 Inch Shabbos Compliance Sabbath Mode: Yes Certificat
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Bosch B36CL81ENW 36 Inch Freestanding French Door Smart Refrigerator with 20.5 cu. ft. Total Capacity, Internal Water Dispenser, UltraClarityPro® Water Filter, and Ice Maker www.ajmadison.com
Retained specification excerpt: : 24 Inch Depth without Door and Handles: 24 Inch Depth without Handles: 29 Inch Depth with Door at
Value used by ExactFit
29 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Bosch B36CL81ENW 36 Inch Freestanding French Door Smart Refrigerator with 20.5 cu. ft. Total Capacity, Internal Water Dispenser, UltraClarityPro® Water Filter, and Ice Maker www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: : 24 Inch Depth without Door and Handles: 24 Inch Depth without Handles: 29 Inch Depth with Door at Reviewed: 2026-09-04
: 24 Inch Depth without Door and Handles: 24 Inch Depth without Handles: 29 Inch Depth with Door at 90°: 43 3/8 Inch Height: 72
Retained specification excerpt: Appliance dimensions with hinges and doors: 72 x 35 5/8 x 29 in
Value used by ExactFit
29 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Bosch measurement source — https://content.abt.com/documents/155840/bosch-800-series-36-fridge-B36CL81ENW-specs.pdf content.abt.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Appliance dimensions with hinges and doors: 72 x 35 5/8 x 29 in Reviewed: 2026-09-04
Appliance dimensions with hinges and doors: 72 x 35 5/8 x 29 in
Bosch B36CL81ENW 36 Inch Freestanding French Door Smart Refrigerator with 20.5 cu. ft. Total Capacity, Internal Water Dispenser, UltraClarityPro® Water Filter, and Ice Maker www.ajmadison.com
Retained specification excerpt: Depth with Door at 90° = 43.375 in | 24 Inch Depth without Door and Handles: 24 Inch Depth without
Value used by ExactFit
43.375 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Bosch B36CL81ENW 36 Inch Freestanding French Door Smart Refrigerator with 20.5 cu. ft. Total Capacity, Internal Water Dispenser, UltraClarityPro® Water Filter, and Ice Maker www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Depth with Door at 90° = 43.375 in | 24 Inch Depth without Door and Handles: 24 Inch Depth without Reviewed: 2026-09-04
Depth with Door at 90° = 43.375 in | 24 Inch Depth without Door and Handles: 24 Inch Depth without Handles: 29 Inch Depth with Door at 90°: 43 3/8 Inch Height: 72 Inch Height without Hinges: 71 1/2 Inch Please note: This website | independent cached support: ajmadison.com, homedepot.com
Depth with Door at 90° = 43.375 in | 24 Inch Depth without Door and Handles: 24 Inch Depth without Handles: 29 Inch Depth with Door at 90°: 43 3/8 Inch Height: 72 Inch Height without Hinges: 71 1/2 Inch Please note: This website | independent cached support: ajmadison.com, homedepot.com
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Bosch B36CL81ENW 36 Inch Freestanding French Door Smart Refrigerator with 20.5 cu. ft. Total Capacity, Internal Water Dispenser, UltraClarityPro® Water Filter, and Ice Maker www.ajmadison.com
Retained specification excerpt: eight: 72 Inch Height without Hinges: 71 1/2 Inch Cutout Width: 36 Inch Cutout Depth: 25 Inch Cutout
Value used by ExactFit
36 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: medium.
Primary evidence
Bosch B36CL81ENW 36 Inch Freestanding French Door Smart Refrigerator with 20.5 cu. ft. Total Capacity, Internal Water Dispenser, UltraClarityPro® Water Filter, and Ice Maker www.ajmadison.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: eight: 72 Inch Height without Hinges: 71 1/2 Inch Cutout Width: 36 Inch Cutout Depth: 25 Inch Cutout Reviewed: 2026-09-04
eight: 72 Inch Height without Hinges: 71 1/2 Inch Cutout Width: 36 Inch Cutout Depth: 25 Inch Cutout Height: 72 Inch Ca
eight: 72 Inch Height without Hinges: 71 1/2 Inch Cutout Width: 36 Inch Cutout Depth: 25 Inch Cutout Height: 72 Inch Ca
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
72 in standard appliance height plus documented 1/2 in top ventilation = 72 1/2 in opening. Calculation or inference: height_hinge_in + top_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Bosch B36CL81ENW Product Specification Sheet assets.skulytics.io · Product Specification Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-05
* When leveling legs are fully extended, add 5/8" to overall height, total 72 5/8". | ** The cutout depth of 25" includes the required 1" airflow. The electrical covers on the back of unit do not require additional depth.
* When leveling legs are fully extended, add 5/8" to overall height, total 72 5/8". | ** The cutout depth of 25" includes the required 1" airflow. The electrical covers on the back of unit do not require additional depth.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Legacy reviewed field migration; endpoint indicators=['each side']; Dimension diagram shows 1/8 in a
Value used by ExactFit
0.125 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: Migrated from side_clearance_wall_in by documented endpoint semantics
Confidence label: high.
Primary evidence
Bosch measurement source — https://content.abt.com/documents/155840/bosch-800-series-36-fridge-B36CL81ENW-specs.pdf content.abt.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Legacy reviewed field migration; endpoint indicators=['each side']; Dimension diagram shows 1/8 in a Reviewed: 2026-09-05
Legacy reviewed field migration; endpoint indicators=['each side']; Dimension diagram shows 1/8 in at each side
Legacy reviewed field migration; endpoint indicators=['each side']; Dimension diagram shows 1/8 in at each side
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Retained specification excerpt: Legacy reviewed field migration; endpoint indicators=['each side']; Dimension diagram shows 1/8 in a
Value used by ExactFit
0.125 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: Migrated from side_clearance_wall_in by documented endpoint semantics
Confidence label: high.
Primary evidence
Bosch measurement source — https://content.abt.com/documents/155840/bosch-800-series-36-fridge-B36CL81ENW-specs.pdf content.abt.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Legacy reviewed field migration; endpoint indicators=['each side']; Dimension diagram shows 1/8 in a Reviewed: 2026-09-05
Legacy reviewed field migration; endpoint indicators=['each side']; Dimension diagram shows 1/8 in at each side
Legacy reviewed field migration; endpoint indicators=['each side']; Dimension diagram shows 1/8 in at each side
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Bosch B36CL81ENW Product Specification Sheet assets.skulytics.io · Product Specification Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
Exact Bosch manual: leave 1/2 in gap at the top for proper ventilation.
Exact Bosch manual: leave 1/2 in gap at the top for proper ventilation.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Bosch B36CL81ENW Product Specification Sheet assets.skulytics.io · Product Specification Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
Exact Bosch manual: leave 1 in behind for proper ventilation.
Exact Bosch manual: leave 1 in behind for proper ventilation.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Bosch diagram documents 1/8 in side spacing; no separate larger numeric wall offset is stated, so this is the controlling baseline. Calculation or inference: hinge wall baseline = documented side spacing.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Retained specification excerpt: Appliance dimensions without hinges and doors: 71 1/2 x 35 5/8 x 24 in
Value used by ExactFit
35.625 in · Fit role: Informational only.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Bosch measurement source — https://content.abt.com/documents/155840/bosch-800-series-36-fridge-B36CL81ENW-specs.pdf content.abt.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Appliance dimensions without hinges and doors: 71 1/2 x 35 5/8 x 24 in Reviewed: 2026-09-04
Appliance dimensions without hinges and doors: 71 1/2 x 35 5/8 x 24 in
Retained specification excerpt: Dimension diagram shows 1/8 in at each side
Value used by ExactFit
0.125 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Bosch measurement source — https://content.abt.com/documents/155840/bosch-800-series-36-fridge-B36CL81ENW-specs.pdf content.abt.com · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Dimension diagram shows 1/8 in at each side Reviewed: 2026-09-04
Bosch B36CL81ENW 36 Inch Freestanding French Door Smart Refrigerator with 20.5 cu. ft. Total Capacity, Internal Water Dispenser, UltraClarityPro® Water Filter, and Ice Maker
www.ajmadison.com · Web source · secondary model/source
Model numbers covered: B36CL81ENW. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
6 displayed measurements supported: Overall width; Cabinet height; Depth without door; Depth with door, without handles; Depth with doors open at 90°; Minimum cutout width.
Availability: retained review record; original URL retained (current availability not rechecked).
Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.