Measurement evidence for Bosch B24CB80ESB

Value used by ExactFit

23.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Bosch B24CB80ESB 800 Series, free-standing fridge- ...
www.absoluteappliances.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Width = 23.625 in | Bosch B24CB80ESB 800 Series, free-standing
Reviewed: 2026-09-04

Plain exact-model specification row: Width = 23.625 in | Bosch B24CB80ESB 800 Series, free-standing fridge- ... Width: 23.625" Height: 79.938" Depth: 26.188" Energy Star : Yes Refrigerator Size: 12.8 (cu. ft.) Fresh Food Capacity: 9.2 (cu. ft.) F

Why this value was used

Plain exact-model specification row: Width = 23.625 in | Bosch B24CB80ESB 800 Series, free-standing fridge- ... Width: 23.625" Height: 79.938" Depth: 26.188" Energy Star : Yes Refrigerator Size: 12.8 (cu. ft.) Fresh Food Capacity: 9.2 (cu. ft.) F

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

79.9375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch B24CB80ESB Product Specification Sheet
assets.skulytics.io · Product Specification Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-04

Manufacturer appliance height is 79 15/16"; retailer case and hinge endpoints both report 79.93 inches.

Why this value was used

Manufacturer appliance height is 79 15/16"; retailer case and hinge endpoints both report 79.93 inches.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

79.9375 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

800 Series 24 in. 12.8 cu. ft. Bottom Freezer Refrigerator in ...
www.homedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height to Top of Door Hinge = 79.9375 in | 800 Series 24 in. 12.8 cu. ft. Bottom Freezer Refrigerato
Reviewed: 2026-09-04

Height to Top of Door Hinge = 79.9375 in | 800 Series 24 in. 12.8 cu. ft. Bottom Freezer Refrigerator in ... Height to Top of Door Hinge (in.) 79.9375 in. Height to Top of Refrigerator Case (in.) 79.92 in. Height to Top of Refrigerato

Why this value was used

Height to Top of Door Hinge = 79.9375 in | 800 Series 24 in. 12.8 cu. ft. Bottom Freezer Refrigerator in ... Height to Top of Door Hinge (in.) 79.9375 in. Height to Top of Refrigerator Case (in.) 79.92 in. Height to Top of Refrigerato

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

23.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — https://www.homedepot.com/p/325607943
www.homedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: B24 chassis exact specification: Depth (Less Door) 23.625 in; manufacturer drawing also prints 23 5/
Reviewed: 2026-09-04

B24 chassis exact specification: Depth (Less Door) 23.625 in; manufacturer drawing also prints 23 5/8".

Why this value was used

B24 chassis exact specification: Depth (Less Door) 23.625 in; manufacturer drawing also prints 23 5/8".

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26.1875 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — https://www.homedepot.com/p/325607943
www.homedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: B24 chassis exact specification: Depth (Excluding Handles) 26.1875 in.
Reviewed: 2026-09-04

B24 chassis exact specification: Depth (Excluding Handles) 26.1875 in.

Why this value was used

B24 chassis exact specification: Depth (Excluding Handles) 26.1875 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Bosch B24CB80ESS/B24CB80ESW cached chassis consensus

Confidence label: medium.

Primary evidence

B24CB80ESS Bosch 800 Series Bottom Freezer Refrigerator 14.1 cu. ft. Canada - Sale! Best Price, Reviews and Specs
www.canadianappliance.ca · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Bosch B24CB80ESS/B24CB80ESW cached chassis consensus
Reviewed: 2026-09-04

Bosch B24CB80ESS/B24CB80ESW cached chassis consensus

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 26.1875 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Bosch B24CB80ESS/B24CB80ESW cached chassis consensus

Confidence label: medium.

Primary evidence

B24CB80ESS Bosch 800 Series Bottom Freezer Refrigerator 14.1 cu. ft. Canada - Sale! Best Price, Reviews and Specs
www.canadianappliance.ca · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Bosch B24CB80ESS/B24CB80ESW cached chassis consensus
Reviewed: 2026-09-04

Bosch B24CB80ESS/B24CB80ESW cached chassis consensus

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 48.0625 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

24 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Bosch B24CB80ESB 24 Inch Counter Depth Freestanding Bottom Freezer ...
www.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inch. Depth: 26 3/16 Inch. Height: 79 15/16 Inch. Cutout Width: 24 Inch. Cutout Depth: 24 Inch. Cuto
Reviewed: 2026-09-04

Inch. Depth: 26 3/16 Inch. Height: 79 15/16 Inch. Cutout Width: 24 Inch. Cutout Depth: 24 Inch. Cutout Height: 80 7/16

Why this value was used

Inch. Depth: 26 3/16 Inch. Height: 79 15/16 Inch. Cutout Width: 24 Inch. Cutout Depth: 24 Inch. Cutout Height: 80 7/16

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

80.438 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Bosch B24CB80ESB 24 Inch Counter Depth Freestanding Bottom Freezer ...
www.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cutout Height: 80 7/16 In
Reviewed: 2026-09-05

Cutout Height: 80 7/16 In

Why this value was used

Cutout Height: 80 7/16 In

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

24 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Bosch B24CB80ESB 24 Inch Counter Depth Freestanding Bottom Freezer ...
www.ajmadison.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cutout Depth: 24 In
Reviewed: 2026-09-05

Cutout Depth: 24 In

Why this value was used

Cutout Depth: 24 In

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: (min_cutout_width_in - case_width_in) / 2

Confidence label: medium.

Calculation inputs: Cabinet case width; Minimum cutout width;

Primary evidence

Bosch B24CB80ESB Product Specification Sheet
assets.skulytics.io · Product Specification Sheet
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

24 in opening minus 23 5/8 in appliance width, divided equally = 3/16 in per side.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 0.1875 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: (min_cutout_width_in - case_width_in) / 2

Confidence label: medium.

Calculation inputs: Cabinet case width; Minimum cutout width;

Primary evidence

Bosch B24CB80ESB Product Specification Sheet
assets.skulytics.io · Product Specification Sheet
Model scope: Not established
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

24 in opening minus 23 5/8 in appliance width, divided equally = 3/16 in per side.

Why this value was used

A required calculation input lacks defensible evidence.

Retained research value: 0.1875 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: min_cutout_height_in - height_hinge_in

Confidence label: medium.

Calculation inputs: Height with hinge / controlling height; Minimum cutout height;

Primary evidence

Bosch B24CB80ESB Product Specification Sheet
assets.skulytics.io · Product Specification Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

80 7/16 in opening minus 79 15/16 in appliance height = 1/2 in.

Why this value was used

80 7/16 in opening minus 79 15/16 in appliance height = 1/2 in. Calculation or inference: min_cutout_height_in - height_hinge_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: min_cutout_depth_in - depth_case_only_in

Confidence label: medium.

Calculation inputs: Depth without door; Minimum cutout depth;

Primary evidence

Bosch B24CB80ESB Product Specification Sheet
assets.skulytics.io · Product Specification Sheet
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 1
Reviewed: 2026-09-05

24 in installation depth minus 23 5/8 in cabinet depth = 3/8 in.

Why this value was used

24 in installation depth minus 23 5/8 in cabinet depth = 3/8 in. Calculation or inference: min_cutout_depth_in - depth_case_only_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2.1875 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: Migrated from side_clearance_wall_in by documented endpoint semantics

Confidence label: high.

Primary evidence

Bosch measurement source — https://www.bestbuy.com/site/questions/bosch-800-series-24-in-wide-12-8-cu-ft-bottom-freezer-counter-depth-smart-refrigerator-with-internal-ice-and-water-dispenser-black/6542110
www.bestbuy.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Legacy reviewed field migration; endpoint indicators=['90-degree', 'full 90']; Bosch exact-chassis a
Reviewed: 2026-09-05

Legacy reviewed field migration; endpoint indicators=['90-degree', 'full 90']; Bosch exact-chassis answer: allow at least 2 3/16" between refrigerator and wall for a full 90-degree opening.

Why this value was used

Legacy reviewed field migration; endpoint indicators=['90-degree', 'full 90']; Bosch exact-chassis answer: allow at least 2 3/16" between refrigerator and wall for a full 90-degree opening.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Informational only. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: case_width_in mapped from populated width_doors_closed_in; doors do not materially change closed product width

Confidence label: low.

Primary evidence

Bosch B24CB80ESB 800 Series, free-standing fridge- ...
www.absoluteappliances.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Low-confidence same-appliance width mapping: case_width_in=23.625 in from width_doors_closed_in.
Reviewed: 2026-09-04

Low-confidence same-appliance width mapping: case_width_in=23.625 in from width_doors_closed_in.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 23.625 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

2.1875 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Bosch measurement source — https://www.bestbuy.com/site/questions/bosch-800-series-24-in-wide-12-8-cu-ft-bottom-freezer-counter-depth-smart-refrigerator-with-internal-ice-and-water-dispenser-black/6542110
www.bestbuy.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Bosch exact-chassis answer: allow at least 2 3/16" between refrigerator and wall for a full 90-degre
Reviewed: 2026-09-04

Bosch exact-chassis answer: allow at least 2 3/16" between refrigerator and wall for a full 90-degree opening.

Why this value was used

Bosch exact-chassis answer: allow at least 2 3/16" between refrigerator and wall for a full 90-degree opening.

Other evidence found

• 0.125 in — superseded

  local-cache manufacturer-family consensus; location not retained. Model scope: not separately recorded. Raw value: Inferred 0.125 in per-side installation clearance from dominant manufacturer-family specification pattern.. The final reviewed registry supersedes this earlier audit value. Bosch exact-chassis answer: allow at least 2 3/16" between refrigerator and wall for a full 90-degree opening.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.