Measurement evidence for Beko BFTF2716WH

This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.

Report a problem with this model Back to Beko BFTF2716WH fit check Check this model against your opening How ExactFit verifies measurements

Beko BFTF2716WH

Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)

View model fit check

Evidence summary

Complete mixed evidence

9exact-model manufacturer values

4verified equivalent/same-chassis values

3secondary-source-only values

0values with unresolved source details

Last reviewed: 2026-09-05. 4 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.

Counts use distinct measurement records. Left and right ventilation share one per-side source record.

Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.

Measurements and supporting evidence

Measurement	Value used	Evidence status	Primary source	Location
Overall width	27.5625 in	✓ Verified — exact model	BFTF2716WH Beko	Page 3
Value used by ExactFit 27.5625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence BFTF2716WH Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 3 Reviewed: 2026-09-04 Cabinet width 27 9/16 in; no lateral door projection when closed Open original source ↗ Why this value was used Cabinet width 27 9/16 in; no lateral door projection when closed Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Cabinet height	67.1875 in	✓ Conflicting sources — resolved	BFTF2716WH Beko	Page 3
Value used by ExactFit 67.1875 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence BFTF2716WH Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 3 Reviewed: 2026-09-04 Height to top of cabinet 67 3/16 in Open original source ↗ Why this value was used Height to top of cabinet 67 3/16 in Other evidence found 27.5625 in — superseded 104280234.pdf; page 3. Model scope: not separately recorded. Raw value: Height to top of cabinet 279/16" (700 mm). The final reviewed registry supersedes this earlier audit value. Height to top of cabinet 67 3/16 in Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Height with hinge / controlling height	67.6875 in	✓ Verified — exact model	BFTF2716WH Beko	Page 3
Value used by ExactFit 67.6875 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence BFTF2716WH Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 3 Reviewed: 2026-09-04 Overall height 67 11/16 in Open original source ↗ Why this value was used Overall height 67 11/16 in Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth without door	21.625 in	✓ Secondary source only	Beko BFTF2716WH Spec Sheet assets.skulytics.io	Page 2
Value used by ExactFit 21.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Beko BFTF2716WH Spec Sheet assets.skulytics.io · Spec Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04 Depth Without Doors 21 5/8 Open original source ↗ Why this value was used Depth Without Doors 21 5/8 Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Depth with door, without handles	26.375 in	✓ Conflicting sources — resolved · Calculated/inferred	Beko BFTF2716SS Spec Sheet assets.skulytics.io	Page 2
Value used by ExactFit 26.375 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: shared current BFTF2716 chassis Confidence label: medium. Primary evidence Beko BFTF2716SS Spec Sheet assets.skulytics.io · Spec Sheet Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04 Finish/ice-maker sibling propagation. Open original source ↗ Why this value was used Finish/ice-maker sibling propagation. Calculation or inference: shared current BFTF2716 chassis. Why evidence from BFTF2716SS applies Target model: BFTF2716WH. Supporting model: BFTF2716SS. Manufacturer: Beko. Product family and measurement relationship: shared current BFTF2716 chassis. Measurement transferred: Depth with door, without handles. Relevant equivalence evidence: Finish/ice-maker sibling propagation.. Known differences: not separately recorded. Review decision: sibling chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found 24.5 in — superseded https://www.beko.com/content/dam/united-states-us-aem/united-states-us-aemProductCatalog/product-documents/8700000567-BFTF2716WH/en-US-8700000567-202307140028322-Product-Formen-US.pdf; page 3. Model scope: not separately recorded. Raw value: Depth with door 24 1/2 in; no projecting handle. The final reviewed registry supersedes this earlier audit value. Finish/ice-maker sibling propagation. Open alternative source ↗ Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with handle	26.375 in	✓ Conflicting sources — resolved	Beko BFTF2716WH Spec Sheet assets.skulytics.io	Page 2
Value used by ExactFit 26.375 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence Beko BFTF2716WH Spec Sheet assets.skulytics.io · Spec Sheet Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04 H x W x D) (in) 67 11 11/16 16 x 27 9/16 16 x 26 3/8 Open original source ↗ Why this value was used H x W x D) (in) 67 11 11/16 16 x 27 9/16 16 x 26 3/8 Other evidence found 24.5 in — superseded https://www.beko.com/content/dam/united-states-us-aem/united-states-us-aemProductCatalog/product-documents/8700000567-BFTF2716WH/en-US-8700000567-202307140028322-Product-Formen-US.pdf; page 3. Model scope: not separately recorded. Raw value: Depth with door 24 1/2 in; no projecting handle. The final reviewed registry supersedes this earlier audit value. H x W x D) (in) 67 11 11/16 16 x 27 9/16 16 x 26 3/8 Open alternative source ↗ Effect on fit result This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Depth with doors open at 90°	51.75 in	✓ Verified — exact model	BFTF2716WH Beko	Page 3
Value used by ExactFit 51.75 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence BFTF2716WH Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 3 Reviewed: 2026-09-04 90-degree door diagram total depth 51 3/4 in Open original source ↗ Why this value was used 90-degree door diagram total depth 51 3/4 in Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Minimum cutout width	31.5 in	✓ Verified — exact model	BFTF2716WH Beko	Page 4
Value used by ExactFit 31.5 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence BFTF2716WH Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-04 Installation opening width 31 1/2 in (800 mm) Open original source ↗ Why this value was used Installation opening width 31 1/2 in (800 mm) Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout height	71.625 in	✓ Verified — equivalent model · Calculated/inferred	Beko BFTF2716SS Spec Sheet assets.skulytics.io	Page 4
Value used by ExactFit 71.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidence Beko BFTF2716SS Spec Sheet assets.skulytics.io · Spec Sheet Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 Minimum opening height is the verified highest appliance endpoint plus the documented top clearance. Open original source ↗ Why this value was used Minimum opening height is the verified highest appliance endpoint plus the documented top clearance. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Why evidence from BFTF2716SS applies Target model: BFTF2716WH. Supporting model: BFTF2716SS. Manufacturer: Beko. Product family and measurement relationship: max(height_case_in,height_hinge_in) + top_clearance_in. Measurement transferred: Minimum cutout height. Relevant equivalence evidence: Minimum opening height is the verified highest appliance endpoint plus the documented top clearance.. Known differences: not separately recorded. Review decision: documented cavity formula; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Minimum cutout depth	23.625 in	✓ Secondary source only · Calculated/inferred	BFTF2716WH Beko	Page 4
Value used by ExactFit 23.625 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidence BFTF2716WH Beko · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 Minimum opening depth derived from case-only depth 21.625 in plus documented rear clearance 2.0 in. Open original source ↗ Why this value was used Minimum opening depth derived from case-only depth 21.625 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Left-side ventilation clearance	2 in	✓ Verified — exact model	BFTF2716WH Beko	Page 4
Value used by ExactFit 2 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: Migrated from side_clearance_wall_in by documented endpoint semantics Confidence label: high. Primary evidence BFTF2716WH Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 Legacy reviewed field migration; endpoint indicators=['each side']; Installation top view: 2 in minimum at each side Open original source ↗ Why this value was used Legacy reviewed field migration; endpoint indicators=['each side']; Installation top view: 2 in minimum at each side Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Right-side ventilation clearance	2 in	✓ Verified — exact model	BFTF2716WH Beko	Page 4
Value used by ExactFit 2 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: Migrated from side_clearance_wall_in by documented endpoint semantics Confidence label: high. Primary evidence BFTF2716WH Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 Legacy reviewed field migration; endpoint indicators=['each side']; Installation top view: 2 in minimum at each side Open original source ↗ Why this value was used Legacy reviewed field migration; endpoint indicators=['each side']; Installation top view: 2 in minimum at each side Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Top clearance	3.9375 in	✓ Verified — equivalent model · Calculated/inferred	Beko BFTF2716SS Spec Sheet assets.skulytics.io	Page 4
Value used by ExactFit 3.9375 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Beko BFTF2716SS Spec Sheet assets.skulytics.io · Spec Sheet Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 Manufacturer family sheet specifies 100 mm top and 50 mm rear/side installation clearances. Open original source ↗ Why this value was used Manufacturer family sheet specifies 100 mm top and 50 mm rear/side installation clearances. Calculation or inference: cached documented shared chassis propagation. Why evidence from BFTF2716SS applies Target model: BFTF2716WH. Supporting model: BFTF2716SS. Manufacturer: Beko. Product family and measurement relationship: Manufacturer family sheet specifies 100 mm top and 50 mm rear/side installation clearances.. Measurement transferred: Top clearance. Relevant equivalence evidence: Manufacturer family sheet specifies 100 mm top and 50 mm rear/side installation clearances.. Known differences: not separately recorded. Review decision: cached documented shared chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Rear clearance	2 in	✓ Verified — exact model	BFTF2716WH Beko	Page 4
Value used by ExactFit 2 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: full-page semantic adjudication of parser alternatives Confidence label: high. Primary evidence BFTF2716WH Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 2"(50 mm) minimum clearance at rear Open original source ↗ Why this value was used 2"(50 mm) minimum clearance at rear Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement
Hinge-side wall clearance	2 in	✓ Verified — equivalent model · Calculated/inferred	Beko BFTF2716SS Spec Sheet assets.skulytics.io	Page 4
Value used by ExactFit 2 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: medium. Primary evidence Beko BFTF2716SS Spec Sheet assets.skulytics.io · Spec Sheet Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-05 Manufacturer family sheet specifies 100 mm top and 50 mm rear/side installation clearances. Open original source ↗ Why this value was used Manufacturer family sheet specifies 100 mm top and 50 mm rear/side installation clearances. Calculation or inference: cached documented shared chassis propagation. Why evidence from BFTF2716SS applies Target model: BFTF2716WH. Supporting model: BFTF2716SS. Manufacturer: Beko. Product family and measurement relationship: Manufacturer family sheet specifies 100 mm top and 50 mm rear/side installation clearances.. Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: Manufacturer family sheet specifies 100 mm top and 50 mm rear/side installation clearances.. Known differences: not separately recorded. Review decision: cached documented shared chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗ Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Cabinet case width	27.5625 in	✓ Verified — exact model	BFTF2716WH Beko	Page 3
Value used by ExactFit 27.5625 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence BFTF2716WH Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 3 Reviewed: 2026-09-04 Cabinet width 27 9/16 in Open original source ↗ Why this value was used Cabinet width 27 9/16 in Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement
Adjoining-wall clearance (reviewed endpoint)	2 in	✓ Verified — exact model	BFTF2716WH Beko	Page 4
Value used by ExactFit 2 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence BFTF2716WH Beko · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 4 Reviewed: 2026-09-04 Installation top view: 2 in minimum at each side Open original source ↗ Why this value was used Installation top view: 2 in minimum at each side Other evidence found No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit result This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement

Conflicting published measurements

Cabinet height

Selected: 67.1875 in. Earlier retained values: 27.5625 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Height to top of cabinet 67 3/16 in

View source scope, location, and impact on fit

Depth with door, without handles

Selected: 26.375 in. Earlier retained values: 24.5 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

Finish/ice-maker sibling propagation. Calculation or inference: shared current BFTF2716 chassis.

View source scope, location, and impact on fit

Depth with handle

Selected: 26.375 in. Earlier retained values: 24.5 in. Endpoint definitions may differ; see the retained transcriptions and final review note.

H x W x D) (in) 67 11 11/16 16 x 27 9/16 16 x 26 3/8

View source scope, location, and impact on fit

Source documents and pages

BFTF2716WH

Beko · Web source · exact model/source

Model numbers covered: BFTF2716WH. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

9 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth with doors open at 90°; Minimum cutout width; Left-side ventilation clearance; Right-side ventilation clearance; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

Beko BFTF2716WH Spec Sheet

assets.skulytics.io · Spec Sheet · secondary model/source

Model numbers covered: BFTF2716WH. Publication/revision date: Not recorded. Reviewed: 2026-09-04.

2 displayed measurements supported: Depth without door; Depth with handle.

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

Beko BFTF2716SS Spec Sheet

assets.skulytics.io · Spec Sheet · equivalent model/source

Model numbers covered: BFTF2716SS. Publication/revision date: Not recorded. Reviewed: 2026-09-05.

4 displayed measurements supported: Depth with door, without handles; Minimum cutout height; Top clearance; Hinge-side wall clearance.

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

BFTF2716WH

Beko · Web source · exact model/source

Model numbers covered: BFTF2716WH. Publication/revision date: Not recorded. Reviewed: 2026-09-05.

2 displayed measurements supported: Minimum cutout depth; Rear clearance.

Availability: retained review record; original URL retained (current availability not rechecked).

Open original source ↗

Report a problem with this model Check whether BFTF2716WH fits your opening Back to Beko BFTF2716WH Read the full verification methodology

Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.

Evidence summary

Complete mixed evidence

Measurements and supporting evidence

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Why evidence from BFTF2716SS applies

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Why evidence from BFTF2716SS applies

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Why evidence from BFTF2716SS applies

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Other evidence found

Effect on fit result

Value used by ExactFit

Primary evidence

Why this value was used

Why evidence from BFTF2716SS applies