This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Unknown configuration · Unknown depth class
Market status: Active (recorded 2026-08-17)
Last reviewed: 2026-09-05. 4 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
| Measurement | Value used | Evidence status | Primary source | Location | Details |
|---|---|---|---|---|---|
| Overall width | 23.4375 in | ✓ Conflicting sources — resolved | [PDF] BFBF2414WH - Syndigo content.syndigo.com | Page 3 | |
Value used by ExactFit23.4375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence[PDF] BFBF2414WH - Syndigo Cabinet width 23 7/16 in; no lateral door projection when closedOpen original source ↗ Why this value was usedCabinet width 23 7/16 in; no lateral door projection when closed Other evidence found
Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Cabinet height | 67.1875 in | ✓ Conflicting sources — resolved | [PDF] BFBF2414WH - Syndigo content.syndigo.com | Page 3 | |
Value used by ExactFit67.1875 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence[PDF] BFBF2414WH - Syndigo Height to top of cabinet 67 3/16 inOpen original source ↗ Why this value was usedHeight to top of cabinet 67 3/16 in Other evidence found
Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Height with hinge / controlling height | 67.75 in | ✓ Secondary source only | Beko BFBF2414WH Spec Sheet assets.skulytics.io | Page 2 | |
Value used by ExactFit67.75 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceBeko BFBF2414WH Spec Sheet H x W x D) (in) 67 3/4 x 23 7/16 16 x 24 1/2Open original source ↗ Why this value was usedH x W x D) (in) 67 3/4 x 23 7/16 16 x 24 1/2 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth without door | 21.625 in | ✓ Secondary source only | Beko BFBF2414WH Spec Sheet assets.skulytics.io | Page 2 | |
Value used by ExactFit21.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceBeko BFBF2414WH Spec Sheet Depth Without Doors 21 5/8Open original source ↗ Why this value was usedDepth Without Doors 21 5/8 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Depth with door, without handles | 24.5 in | ✓ Verified — equivalent model · Calculated/inferred | Beko BFBF2414SS Spec Sheet assets.skulytics.io | Page 2 | |
Value used by ExactFit24.5 in · Fit role: Traffic projection. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: shared BFBF2414 chassis Confidence label: medium. Primary evidenceBeko BFBF2414SS Spec Sheet Finish-only sibling propagation.Open original source ↗ Why this value was usedFinish-only sibling propagation. Calculation or inference: shared BFBF2414 chassis. Why evidence from BFBF2414SS appliesTarget model: BFBF2414WH. Supporting model: BFBF2414SS. Manufacturer: Beko. Product family and measurement relationship: shared BFBF2414 chassis. Measurement transferred: Depth with door, without handles. Relevant equivalence evidence: Finish-only sibling propagation.. Known differences: not separately recorded. Review decision: sibling chassis propagation; 2026-09-05. This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence. Supporting source ↗Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with handle | 24.5 in | ✓ Secondary source only | Beko BFBF2414WH Spec Sheet assets.skulytics.io | Page 2 | |
Value used by ExactFit24.5 in · Fit role: Traffic projection. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceBeko BFBF2414WH Spec Sheet H x W x D) (in) 67 3/4 x 23 7/16 16 x 24 1/2Open original source ↗ Why this value was usedH x W x D) (in) 67 3/4 x 23 7/16 16 x 24 1/2 Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Depth with doors open at 90° | 47.5625 in | ✓ Secondary source only | [PDF] BFBF2414WH - Syndigo content.syndigo.com | Page 3 | |
Value used by ExactFit47.5625 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence[PDF] BFBF2414WH - Syndigo 90-degree door diagram total depth 47 9/16 inOpen original source ↗ Why this value was used90-degree door diagram total depth 47 9/16 in Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Minimum cutout width | 24.625 in | ✓ Secondary source only | [PDF] BFBF2414WH - Syndigo content.syndigo.com | Page 4 | |
Value used by ExactFit24.625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence[PDF] BFBF2414WH - Syndigo Installation opening width 24 5/8 in (625 mm)Open original source ↗ Why this value was usedInstallation opening width 24 5/8 in (625 mm) Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout height | 69.75 in | ✓ Secondary source only · Calculated/inferred | Beko BFBF2414WH Spec Sheet assets.skulytics.io | Page 4 | |
Value used by ExactFit69.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in Confidence label: medium. Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance; Primary evidenceBeko BFBF2414WH Spec Sheet Minimum opening height is the verified highest appliance endpoint plus the documented top clearance.Open original source ↗ Why this value was usedMinimum opening height is the verified highest appliance endpoint plus the documented top clearance. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Minimum cutout depth | 23 in | ✓ Secondary source only · Calculated/inferred | BFBF2414WHIM Beko | Page 4 | |
Value used by ExactFit23 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement. Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in Confidence label: medium. Calculation inputs: Depth without door; Rear clearance; Primary evidenceBFBF2414WHIM Minimum opening depth derived from case-only depth 21.625 in plus documented rear clearance 1.375 in.Open original source ↗ Why this value was usedMinimum opening depth derived from case-only depth 21.625 in plus documented rear clearance 1.375 in. Calculation or inference: depth_case_only_in + rear_clearance_in. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Left-side ventilation clearance | 0.5625 in | ✓ Secondary source only | [PDF] BFBF2414WH - Syndigo content.syndigo.com | Page 4 | |
Value used by ExactFit0.5625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: Migrated from side_clearance_wall_in by documented endpoint semantics Confidence label: high. Primary evidence[PDF] BFBF2414WH - Syndigo Legacy reviewed field migration; endpoint indicators=['each side']; Installation top view: 9/16 in minimum at each sideOpen original source ↗ Why this value was usedLegacy reviewed field migration; endpoint indicators=['each side']; Installation top view: 9/16 in minimum at each side Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Right-side ventilation clearance | 0.5625 in | ✓ Secondary source only | [PDF] BFBF2414WH - Syndigo content.syndigo.com | Page 4 | |
Value used by ExactFit0.5625 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: Migrated from side_clearance_wall_in by documented endpoint semantics Confidence label: high. Primary evidence[PDF] BFBF2414WH - Syndigo Legacy reviewed field migration; endpoint indicators=['each side']; Installation top view: 9/16 in minimum at each sideOpen original source ↗ Why this value was usedLegacy reviewed field migration; endpoint indicators=['each side']; Installation top view: 9/16 in minimum at each side Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Top clearance | 2 in | ✓ Secondary source only | Beko BFBF2414WH Spec Sheet assets.skulytics.io | Page 4 | |
Value used by ExactFit2 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceBeko BFBF2414WH Spec Sheet Cached manufacturer document specifies the installation clearances used for this model family.Open original source ↗ Why this value was usedCached manufacturer document specifies the installation clearances used for this model family. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Rear clearance | 1.375 in | ✓ Verified — exact model | BFBF2414WHIM Beko | Page 4 | |
Value used by ExactFit1.375 in · Fit role: Cavity fit. Original published value and unit: see retained transcription below. Normalization: full-page semantic adjudication of parser alternatives Confidence label: high. Primary evidenceBFBF2414WHIM 13/8" (35 mm) minimum clearance at rearOpen original source ↗ Why this value was used13/8" (35 mm) minimum clearance at rear Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit. Report this measurement | |||||
| Hinge-side wall clearance | 0.5625 in | ✓ Secondary source only | Beko BFBF2414WH Spec Sheet assets.skulytics.io | Page 4 | |
Value used by ExactFit0.5625 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidenceBeko BFBF2414WH Spec Sheet Cached manufacturer document specifies the installation clearances used for this model family.Open original source ↗ Why this value was usedCached manufacturer document specifies the installation clearances used for this model family. Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Cabinet case width | 23.4375 in | ✓ Conflicting sources — resolved | [PDF] BFBF2414WH - Syndigo content.syndigo.com | Page 3 | |
Value used by ExactFit23.4375 in · Fit role: Informational only. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence[PDF] BFBF2414WH - Syndigo Cabinet width 23 7/16 inOpen original source ↗ Why this value was usedCabinet width 23 7/16 in Other evidence found
Effect on fit resultThis is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
| Adjoining-wall clearance (reviewed endpoint) | 0.5625 in | ✓ Secondary source only | [PDF] BFBF2414WH - Syndigo content.syndigo.com | Page 4 | |
Value used by ExactFit0.5625 in · Fit role: Operating clearance. Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding. Confidence label: high. Primary evidence[PDF] BFBF2414WH - Syndigo Installation top view: 9/16 in minimum at each sideOpen original source ↗ Why this value was usedInstallation top view: 9/16 in minimum at each side Other evidence foundNo materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched. Effect on fit resultThis is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access. Report this measurement | |||||
Selected: 23.4375 in. Earlier retained values: 24.5 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Cabinet width 23 7/16 in; no lateral door projection when closed
View source scope, location, and impact on fitSelected: 67.1875 in. Earlier retained values: 67.75 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Height to top of cabinet 67 3/16 in
View source scope, location, and impact on fitSelected: 23.4375 in. Earlier retained values: 24.5 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Cabinet width 23 7/16 in
View source scope, location, and impact on fitcontent.syndigo.com · Web source · secondary model/source
Model numbers covered: BFBF2414WH. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
8 displayed measurements supported: Overall width; Cabinet height; Depth with doors open at 90°; Minimum cutout width; Left-side ventilation clearance; Right-side ventilation clearance; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · Spec Sheet · secondary model/source
Model numbers covered: BFBF2414WH. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
6 displayed measurements supported: Height with hinge / controlling height; Depth without door; Depth with handle; Minimum cutout height; Top clearance; Hinge-side wall clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗assets.skulytics.io · Spec Sheet · equivalent model/source
Model numbers covered: BFBF2414SS. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
1 displayed measurements supported: Depth with door, without handles.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Beko · Web source · exact model/source
Model numbers covered: BFBF2414WH. Publication/revision date: Not recorded. Reviewed: 2026-09-05.
2 displayed measurements supported: Minimum cutout depth; Rear clearance.
Availability: retained review record; original URL retained (current availability not rechecked).
Open original source ↗Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.