Measurement evidence for Amana ASI2575GRW

Value used by ExactFit

35.88 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Amana ASI2575GRW Side-by-Side Refrigerators | Missouri | Slyman Bros
slymanbros.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Width = 35.88 in | Amana ASI2575GRW Side-by-Side Refrigerators
Reviewed: 2026-09-04

Plain exact-model specification row: Width = 35.88 in | Amana ASI2575GRW Side-by-Side Refrigerators | Missouri | Slyman Bros | | | --- | | Width | 35.88 in. | | Height | 69.25 in. | | Length | 34.13 in. | | Weight | 262 lbs. | | Cabinet Width (in) | 35 1/2 | | Carton Depth |

Why this value was used

Plain exact-model specification row: Width = 35.88 in | Amana ASI2575GRW Side-by-Side Refrigerators | Missouri | Slyman Bros | | | --- | | Width | 35.88 in. | | Height | 69.25 in. | | Length | 34.13 in. | | Weight | 262 lbs. | | Cabinet Width (in) | 35 1/2 | | Carton Depth |

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

68.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana ASI2575GRW Side-by-Side Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Cabinet 68 5/8 in. Cached exact-model specification tables agree across applianceho
Reviewed: 2026-09-04

Height To Top Of Cabinet 68 5/8 in. Cached exact-model specification tables agree across appliancehomestore.com, slymanbros.com, and homedepot.com.

Why this value was used

Height To Top Of Cabinet 68 5/8 in. Cached exact-model specification tables agree across appliancehomestore.com, slymanbros.com, and homedepot.com.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Amana 24.6 cu. ft. Side by Side Refrigerator with Dual Pad External ...
www.homedepot.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height to Top of Door Hinge = 69.25 in | Amana 24.6 cu. ft. Side by Side Refrigerator with Dual Pad
Reviewed: 2026-09-04

Height to Top of Door Hinge = 69.25 in | Amana 24.6 cu. ft. Side by Side Refrigerator with Dual Pad ... Height to Top of Door Hinge (in.) 69.25 in. Height to Top of Refrigerator Case (in.) ... width for your Amana® Refrigerator

Why this value was used

Height to Top of Door Hinge = 69.25 in | Amana 24.6 cu. ft. Side by Side Refrigerator with Dual Pad ... Height to Top of Door Hinge (in.) 69.25 in. Height to Top of Refrigerator Case (in.) ... width for your Amana® Refrigerator

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana ASI2575GRW Side-by-Side Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors 28 in. Cached exact-model specification tables agree across appliancehomestore
Reviewed: 2026-09-04

Depth Excluding Doors 28 in. Cached exact-model specification tables agree across appliancehomestore.com, slymanbros.com, and homedepot.com.

Why this value was used

Depth Excluding Doors 28 in. Cached exact-model specification tables agree across appliancehomestore.com, slymanbros.com, and homedepot.com.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.625 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana ASI2575GRW Side-by-Side Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Excluding Handles 31 5/8 in. Cached exact-model specification tables agree across appli
Reviewed: 2026-09-04

Depth Closed Excluding Handles 31 5/8 in. Cached exact-model specification tables agree across appliancehomestore.com, slymanbros.com, and homedepot.com.

Why this value was used

Depth Closed Excluding Handles 31 5/8 in. Cached exact-model specification tables agree across appliancehomestore.com, slymanbros.com, and homedepot.com.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana ASI2575GRW Side-by-Side Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Including Handles 34 1/8 in. Cached exact-model specification tables agree across appli
Reviewed: 2026-09-04

Depth Closed Including Handles 34 1/8 in. Cached exact-model specification tables agree across appliancehomestore.com, slymanbros.com, and homedepot.com.

Why this value was used

Depth Closed Including Handles 34 1/8 in. Cached exact-model specification tables agree across appliancehomestore.com, slymanbros.com, and homedepot.com.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

49.375 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana ASI2575GRW Side-by-Side Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth With Door Open 90 Degree 49 3/8 in. Cached exact-model specification tables agree across appli
Reviewed: 2026-09-04

Depth With Door Open 90 Degree 49 3/8 in. Cached exact-model specification tables agree across appliancehomestore.com, slymanbros.com, and homedepot.com.

Why this value was used

Depth With Door Open 90 Degree 49 3/8 in. Cached exact-model specification tables agree across appliancehomestore.com, slymanbros.com, and homedepot.com.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana ASI2575GRW Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-04

Model-folder owner manual: Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm).

Why this value was used

Model-folder owner manual: Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm).

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

69.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Amana measurement source — https://www.amana.com/content/dam/global/documents/201803/installation-instruction-w11105306-rev-a.pdf
Amana · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 6
Reviewed: 2026-09-05

Minimum opening height derived from highest stored appliance endpoint 69.25 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest stored appliance endpoint 69.25 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

30 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Amana measurement source — https://www.amana.com/content/dam/global/documents/201803/installation-instruction-w11105306-rev-a.pdf
Amana · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 6
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 28.0 in plus documented rear clearance 2.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 28.0 in plus documented rear clearance 2.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — local-cache manufacturer-family consensus
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-05

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — local-cache manufacturer-family consensus
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-05

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern ASI2575G****

Confidence label: medium.

Primary evidence

Amana measurement source — https://www.amana.com/content/dam/global/documents/201803/installation-instruction-w11105306-rev-a.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 6
Reviewed: 2026-09-05

1/2" of space on each side and at the top

Why this value was used

1/2" of space on each side and at the top Calculation or inference: documented DOE model pattern ASI2575G****.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern ASI2575G****

Confidence label: medium.

Primary evidence

Amana measurement source — https://www.amana.com/content/dam/global/documents/201803/installation-instruction-w11105306-rev-a.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 6
Reviewed: 2026-09-05

2" of space behind

Why this value was used

2" of space behind Calculation or inference: documented DOE model pattern ASI2575G****.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Amana ASI2175GRB Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

next to a fixed wall, leave a 2" (5.08 cm

Why this value was used

next to a fixed wall, leave a 2" (5.08 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

35.5 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana ASI2575GRW Side-by-Side Refrigerators | South Carolina | Appliance Home Store Inc
appliancehomestore.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width 35 1/2 in. Cached exact-model specification tables agree across appliancehomestore.com
Reviewed: 2026-09-04

Cabinet Width 35 1/2 in. Cached exact-model specification tables agree across appliancehomestore.com, slymanbros.com, and homedepot.com.

Why this value was used

Cabinet Width 35 1/2 in. Cached exact-model specification tables agree across appliancehomestore.com, slymanbros.com, and homedepot.com.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Whirlpool-platform freestanding family installation clearance

Confidence label: low.

Primary evidence

Amana measurement source — local-cache manufacturer-family consensus
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-04

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.