Measurement evidence for Amana ASI2175GRW

Value used by ExactFit

33.13 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Shop Amana® 33-inch Side-by-Side Refrigerator with Dual Pad External Ice and Water Dispenser ASI2175GRW | Shuh's Appliance Centre
shuhappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model dimensions: Width 33.13 in; Cabinet Width is separately 32.75 in.
Reviewed: 2026-09-04

Exact-model dimensions: Width 33.13 in; Cabinet Width is separately 32.75 in.

Why this value was used

Exact-model dimensions: Width 33.13 in; Cabinet Width is separately 32.75 in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

65.625 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

ASI2175GRW Amana Side by Side Refrigerator 33 inch 21.2 cu. ft. Canada - Sale! Best Price, Reviews and Specs
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height to Top of Case = 65.625 in | Capacity | 6.77 Cu Ft | | Width | 33 1/8 inches | | Height | 66
Reviewed: 2026-09-04

Height to Top of Case = 65.625 in | Capacity | 6.77 Cu Ft | | Width | 33 1/8 inches | | Height | 66 1/4 inches | | Height to Top of Case | 65 5/8 inches | | Height to Top of Door Hinge | 66 1/4 inches | | Depth | 34 1/8 inches | | D

Why this value was used

Height to Top of Case = 65.625 in | Capacity | 6.77 Cu Ft | | Width | 33 1/8 inches | | Height | 66 1/4 inches | | Height to Top of Case | 65 5/8 inches | | Height to Top of Door Hinge | 66 1/4 inches | | Depth | 34 1/8 inches | | D

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.25 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

ASI2175GRW Amana Side by Side Refrigerator 33 inch 21.2 cu. ft. Canada - Sale! Best Price, Reviews and Specs
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height to Top of Door Hinge = 66.25 in | inches | | Height | 66 1/4 inches | | Height to Top of Case
Reviewed: 2026-09-04

Height to Top of Door Hinge = 66.25 in | inches | | Height | 66 1/4 inches | | Height to Top of Case | 65 5/8 inches | | Height to Top of Door Hinge | 66 1/4 inches | | Depth | 34 1/8 inches | | Depth without Handles | 31 5/8 inches | | Depth e

Why this value was used

Height to Top of Door Hinge = 66.25 in | inches | | Height | 66 1/4 inches | | Height to Top of Case | 65 5/8 inches | | Height to Top of Door Hinge | 66 1/4 inches | | Depth | 34 1/8 inches | | Depth without Handles | 31 5/8 inches | | Depth e

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

ASI2175GRW Amana Side by Side Refrigerator 33 inch 21.2 cu. ft. Canada - Sale! Best Price, Reviews and Specs
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth excluding Doors = 28.0 in | inches | | Depth | 34 1/8 inches | | Depth without Handles | 31 5
Reviewed: 2026-09-04

Depth excluding Doors = 28.0 in | inches | | Depth | 34 1/8 inches | | Depth without Handles | 31 5/8 inches | | Depth excluding Doors | 28 inches | | Depth with Door Open 90 Degrees | 49 5/8 inches | | Refrigerator Width Clas

Why this value was used

Depth excluding Doors = 28.0 in | inches | | Depth | 34 1/8 inches | | Depth without Handles | 31 5/8 inches | | Depth excluding Doors | 28 inches | | Depth with Door Open 90 Degrees | 49 5/8 inches | | Refrigerator Width Clas

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

31.625 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

ASI2175GRW Amana Side by Side Refrigerator 33 inch 21.2 cu. ft. Canada - Sale! Best Price, Reviews and Specs
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth without Handles = 31.625 in | s | | Height to Top of Door Hinge | 66 1/4 inches | | Depth | 34
Reviewed: 2026-09-04

Depth without Handles = 31.625 in | s | | Height to Top of Door Hinge | 66 1/4 inches | | Depth | 34 1/8 inches | | Depth without Handles | 31 5/8 inches | | Depth excluding Doors | 28 inches | | Depth with Door Open 90 Degrees | 49

Why this value was used

Depth without Handles = 31.625 in | s | | Height to Top of Door Hinge | 66 1/4 inches | | Depth | 34 1/8 inches | | Depth without Handles | 31 5/8 inches | | Depth excluding Doors | 28 inches | | Depth with Door Open 90 Degrees | 49

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

34.125 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

ASI2175GRW Amana Side by Side Refrigerator 33 inch 21.2 cu. ft. Canada - Sale! Best Price, Reviews and Specs
www.canadianappliance.ca · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Plain exact-model specification row: Depth = 34.125 in | inches | | Height to Top of Case | 65 5/8
Reviewed: 2026-09-04

Plain exact-model specification row: Depth = 34.125 in | inches | | Height to Top of Case | 65 5/8 inches | | Height to Top of Door Hinge | 66 1/4 inches | | Depth | 34 1/8 inches | | Depth without Handles | 31 5/8 inches | | Depth excluding Doors | 28 inches | | Depth with Door Open 90 Degrees | 4

Why this value was used

Plain exact-model specification row: Depth = 34.125 in | inches | | Height to Top of Case | 65 5/8 inches | | Height to Top of Door Hinge | 66 1/4 inches | | Depth | 34 1/8 inches | | Depth without Handles | 31 5/8 inches | | Depth excluding Doors | 28 inches | | Depth with Door Open 90 Degrees | 4

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — https://www.ajmadison.com/cgi-bin/ajmadison/ASI2175GRW.html
www.ajmadison.com · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Multiple exact-model specification feeds state Depth with Door at 90 degrees = 49 3/8 in (49.375).
Reviewed: 2026-09-04

Multiple exact-model specification feeds state Depth with Door at 90 degrees = 49 3/8 in (49.375).

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 49.375 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

• 49.625 in — superseded

  https://www.canadianappliance.ca/product/Amana_ASI2175GRW_Side_by_Side_Refrigerators_Amana_ASI2175GRW.html; location not retained. Model scope: not separately recorded. Raw value: Depth with Door Open 90 Degrees = 49.625 in | Depth without Handles | 31 5/8 inches | | Depth excluding Doors | 28 inches | | Depth with Door Open 90 Degrees | 49 5/8 inches | | Refrigerator Width Class | 33 inches | | Color | White | | Door Color | Whi. The final reviewed registry supersedes this earlier audit value. Multiple exact-model specification feeds state Depth with Door at 90 degrees = 49 3/8 in (49.375).

  Open alternative source ↗

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

36 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Refrigerator AMANA ASI2175GRW - User manual and instructions
www.notice-facile.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: as an oven or radiator. ■ Normal minimum cabinet cut-out width required for product installation is
Reviewed: 2026-09-04

as an oven or radiator. ■ Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm). However, if the product is placed aga

Why this value was used

as an oven or radiator. ■ Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm). However, if the product is placed aga

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

66.75 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in,height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Amana ASI2175GRB Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Minimum opening height derived from highest appliance endpoint 66.25 in plus documented top clearance 0.5 in.

Why this value was used

Minimum opening height derived from highest appliance endpoint 66.25 in plus documented top clearance 0.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

29 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Amana ASI2175GRB Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

Minimum opening depth derived from case-only depth 28.0 in plus documented rear clearance 1.0 in.

Why this value was used

Minimum opening depth derived from case-only depth 28.0 in plus documented rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — local-cache manufacturer-family consensus
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-05

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

Unknown · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana measurement source — local-cache manufacturer-family consensus
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-05

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

Why this value was used

The retained record does not establish source scope or a resolvable supporting source.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Amana ASI2175GRB Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

1.27 cm) of space on each side and at the top

Why this value was used

1.27 cm) of space on each side and at the top Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Amana ASI2175GRB Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

2.54 cm) of space behind

Why this value was used

2.54 cm) of space behind Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: cached document family mapping: generic_or_unscoped_shared_document

Confidence label: medium.

Primary evidence

Amana ASI2175GRB Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 7
Reviewed: 2026-09-05

next to a fixed wall, leave a 2" (5.08 cm

Why this value was used

next to a fixed wall, leave a 2" (5.08 cm Calculation or inference: cached document family mapping: generic_or_unscoped_shared_document.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

32.75 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: medium.

Primary evidence

Shop Amana® 33-inch Side-by-Side Refrigerator with Dual Pad External Ice and Water Dispenser ASI2175GRW | Shuh's Appliance Centre
shuhappliance.com · Web source
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Retained specification excerpt: Exact-model cached specification: Cabinet Width = 32.75 in | h 34.13" Gross Weight 250.0 lbs. Height
Reviewed: 2026-09-04

Exact-model cached specification: Cabinet Width = 32.75 in | h 34.13" Gross Weight 250.0 lbs. Height 65.63" Net Weight 243 lbs. Width 33.13" Cabinet Width 32.75" Depth Excluding Doors 28" Height To Top Of Cabinet 65.63" Height To Top Of Door

Why this value was used

Exact-model cached specification: Cabinet Width = 32.75 in | h 34.13" Gross Weight 250.0 lbs. Height 65.63" Net Weight 243 lbs. Width 33.13" Cabinet Width 32.75" Depth Excluding Doors 28" Height To Top Of Cabinet 65.63" Height To Top Of Door

Other evidence found

• 54 in — superseded

  https://www.notice-facile.com/en/manual/519396/amana+asi2175grw; location not retained. Model scope: not separately recorded. Raw value: pans is desired, an additional 18" (45.72 cm) of cabinet width is required, so a total cabinet opening width of 54" (137.16 cm) is recommended. ## For Counter-Depth . The final reviewed registry supersedes this earlier audit value. Exact-model cached specification: Cabinet Width = 32.75 in | h 34.13" Gross Weight 250.0 lbs. Height 65.63" Net Weight 243 lbs. Width 33.13" Cabinet Width 32.75" Depth Excluding Doors 28" Height To Top Of Cabinet 65.63" Height To Top Of Door

  Open alternative source ↗

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Whirlpool-platform freestanding family installation clearance

Confidence label: low.

Primary evidence

Amana measurement source — local-cache manufacturer-family consensus
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-04

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.