This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-09-05. 3 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX3028PW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Top Freezer Refrigerator - 16.3 cu. ft. White ARTX3028PW | Amana Amana
Retained specification excerpt: Height To Top Of Cabinet: 65.38 in | 5 in Freezer Capacity Volume 4.03 cu. ft. Gross Weight 180 lbs
Value used by ExactFit
65.38 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Top Freezer Refrigerator - 16.3 cu. ft. White ARTX3028PW | Amana Amana · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Height To Top Of Cabinet: 65.38 in | 5 in Freezer Capacity Volume 4.03 cu. ft. Gross Weight 180 lbs Reviewed: 2026-09-04
Height To Top Of Cabinet: 65.38 in | 5 in Freezer Capacity Volume 4.03 cu. ft. Gross Weight 180 lbs Height 65.625 in Height To Top Of Cabinet 65.375 in Height To Top Of Door Hinge 65.625 in Height To Top Of Door Trim 66.625 in Maxi
Height To Top Of Cabinet: 65.38 in | 5 in Freezer Capacity Volume 4.03 cu. ft. Gross Weight 180 lbs Height 65.625 in Height To Top Of Cabinet 65.375 in Height To Top Of Door Hinge 65.625 in Height To Top Of Door Trim 66.625 in Maxi
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Top Freezer Refrigerator - 16.3 cu. ft. White ARTX3028PW | Amana Amana
Retained specification excerpt: Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 65.62 in. Context: u.
Value used by ExactFit
65.62 in · Fit role: Cavity fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Top Freezer Refrigerator - 16.3 cu. ft. White ARTX3028PW | Amana Amana · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 65.62 in. Context: u. Reviewed: 2026-09-04
Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 65.62 in. Context: u. ft. Gross Weight 180 lbs Height 65.625 in Height To Top Of Cabinet 65.375 in Height To Top Of Door Hinge 65.625 in Height To Top Of Door Trim 66.625 in Maximum Height 66.625 in Minimum Height 65
Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 65.62 in. Context: u. ft. Gross Weight 180 lbs Height 65.625 in Height To Top Of Cabinet 65.375 in Height To Top Of Door Hinge 65.625 in Height To Top Of Door Trim 66.625 in Maximum Height 66.625 in Minimum Height 65
Other evidence found
66.625 in — superseded
90391302.pdf; page 1. Model scope: not separately recorded. Raw value: A Height Overall = 66 5/8". The final reviewed registry supersedes this earlier audit value. Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 65.62 in. Context: u. ft. Gross Weight 180 lbs Height 65.625 in Height To Top Of Cabinet 65.375 in Height To Top Of Door Hinge 65.625 in Height To Top Of Door Trim 66.625 in Maximum Height 66.625 in Minimum Height 65
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX3028PW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Top Freezer Refrigerator - 16.3 cu. ft. White ARTX3028PW | Amana Amana
Retained specification excerpt: Depth Closed Excluding Handles: 31.88 in | s Cabinet Width 28 in Capacity 16.3 cu. ft. Common Size 2
Value used by ExactFit
31.88 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Top Freezer Refrigerator - 16.3 cu. ft. White ARTX3028PW | Amana Amana · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Closed Excluding Handles: 31.88 in | s Cabinet Width 28 in Capacity 16.3 cu. ft. Common Size 2 Reviewed: 2026-09-04
Depth Closed Excluding Handles: 31.88 in | s Cabinet Width 28 in Capacity 16.3 cu. ft. Common Size 28"" in Depth 31.875 in Depth Closed Excluding Handles 31.875 in Depth Closed Including Handles 31.875 in Depth Excluding Doors 27.625 in Depth
Depth Closed Excluding Handles: 31.88 in | s Cabinet Width 28 in Capacity 16.3 cu. ft. Common Size 28"" in Depth 31.875 in Depth Closed Excluding Handles 31.875 in Depth Closed Including Handles 31.875 in Depth Excluding Doors 27.625 in Depth
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX3028PW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX3028PW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Retained specification excerpt: Official family dimension guide: recommended 1/2 in space on each side.
Value used by ExactFit
29 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: width_doors_closed_in + 2 * exact/family installation side clearance
Amana measurement source — https://www.amana.com/content/dam/global/documents/202309/dimension-guide-w11685534-revA.pdf Amana · Web source Model scope: Secondary source Publication/revision date: Not recorded Location: Retained specification excerpt: Official family dimension guide: recommended 1/2 in space on each side. Reviewed: 2026-09-04
Official family dimension guide: recommended 1/2 in space on each side.
Official family dimension guide: recommended 1/2 in space on each side. Calculation or inference: width_doors_closed_in + 2 * exact/family installation side clearance.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Installation envelope: max(case 65.38, hinge 65.62) + 0.5 in top = 66.12 in. Calculation or inference: max(height_case_in, height_hinge_in) + top_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Installation envelope: 27.5 in case depth + 1 in rear = 28.5 in. Calculation or inference: depth_case_only_in + rear_clearance_in.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern ARTX3028P***
Confidence label: high.
Primary evidence
Amana measurement source — https://www.amana.com/content/dam/global/documents/202309/dimension-guide-w11685534-revA.pdf Amana · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
1/2" space on each side Calculation or inference: documented DOE model pattern ARTX3028P***.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern ARTX3028P***
Confidence label: high.
Primary evidence
Amana measurement source — https://www.amana.com/content/dam/global/documents/202309/dimension-guide-w11685534-revA.pdf Amana · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
1/2" space on each side Calculation or inference: documented DOE model pattern ARTX3028P***.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX3028PW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
Exact ARTX3028 guide: allow 1/2" between overhead cabinets and refrigerator top.
Exact ARTX3028 guide: allow 1/2" between overhead cabinets and refrigerator top.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX3028PW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
Exact ARTX3028 guide: allow at least 1" between back of cabinet and wall.
Exact ARTX3028 guide: allow at least 1" between back of cabinet and wall.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX3028PW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
Exact ARTX3028 guide: leave 2" minimum on hinge side next to a fixed wall; replaces misclassified 1/2" ventilation value.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX3028PW Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Retained specification excerpt: Corrected prior value 2 in ((5.08 cm) minimum on the hinge side). Official family dimension guide: r
Value used by ExactFit
0.5 in · Fit role: Operating clearance.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana measurement source — https://www.amana.com/content/dam/global/documents/202309/dimension-guide-w11685534-revA.pdf Amana · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Corrected prior value 2 in ((5.08 cm) minimum on the hinge side). Official family dimension guide: r Reviewed: 2026-09-04
Corrected prior value 2 in ((5.08 cm) minimum on the hinge side). Official family dimension guide: recommended 1/2 in space on each side.
Corrected prior value 2 in ((5.08 cm) minimum on the hinge side). Official family dimension guide: recommended 1/2 in space on each side.
Other evidence found
2 in — superseded
90391302.pdf; page 2. Model scope: not separately recorded. Raw value: (5.08 cm) minimum on the hinge side. The final reviewed registry supersedes this earlier audit value. Corrected prior value 2 in ((5.08 cm) minimum on the hinge side). Official family dimension guide: recommended 1/2 in space on each side.
Effect on fit result
This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Selected: 65.62 in. Earlier retained values: 66.625 in. Endpoint definitions may differ; see the retained transcriptions and final review note.
Reviewed cached exact-model manufacturer label: Height To Top Of Door Hinge = 65.62 in. Context: u. ft. Gross Weight 180 lbs Height 65.625 in Height To Top Of Cabinet 65.375 in Height To Top Of Door Hinge 65.625 in Height To Top Of Door Trim 66.625 in Maximum Height 66.625 in Minimum Height 65
Model numbers covered: ARTX3028PW. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
10 displayed measurements supported: Overall width; Depth without door; Depth with handle; Depth with doors open at 90°; Minimum cutout height; Minimum cutout depth; Top clearance; Rear clearance; Hinge-side wall clearance; Cabinet case width.
Availability: retained review record; original URL retained (current availability not rechecked).
Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.