This page shows the sources and review decisions behind the measurements used by ExactFit. Evidence for the exact model is identified separately from verified equivalent-model or same-chassis evidence. Missing values remain Unknown.
Last reviewed: 2026-09-05. 6 retained source records. 0 unresolved conflicts. All inputs required by the cavity calculation are supported; an applicable cutout may replace additive requirements.
Counts use distinct measurement records. Left and right ventilation share one per-side source record.
Some measurements on this page are not supported by an exact-model document. Each affected row identifies the model relationship and supporting evidence.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX2419SB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX2419SB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX2419SB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX2419SB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
30-Inch Wide Garage Ready Top-Freezer Refrigerator—19 Cu. Ft. Black ARTX2419SB | Amana Amana
Retained specification excerpt: Depth Closed Excluding Handles: 32.25 in | Temperature Range 32-45F / -10-21F Freezer ### Dimensions
Value used by ExactFit
32.25 in · Fit role: Traffic projection.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
30-Inch Wide Garage Ready Top-Freezer Refrigerator—19 Cu. Ft. Black ARTX2419SB | Amana Amana · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Retained specification excerpt: Depth Closed Excluding Handles: 32.25 in | Temperature Range 32-45F / -10-21F Freezer ### Dimensions Reviewed: 2026-09-04
Depth Closed Excluding Handles: 32.25 in | Temperature Range 32-45F / -10-21F Freezer ### Dimensions Cabinet Width 29.5 in Depth Closed Excluding Handles 32.25 in Depth Closed Including Handles 32.25 in Depth Excluding Doors 28.375 in Depth W
Depth Closed Excluding Handles: 32.25 in | Temperature Range 32-45F / -10-21F Freezer ### Dimensions Cabinet Width 29.5 in Depth Closed Excluding Handles 32.25 in Depth Closed Including Handles 32.25 in Depth Excluding Doors 28.375 in Depth W
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX2419SB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX2419SB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
30.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: 29.5 + 2 * 0.5
Confidence label: medium.
Primary evidence
Amana ARTX2419SB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04
Minimum opening derived from exact product width plus explicit symmetric side spacing: 29.5 + 2 * 0.5 = 30.5 in. Side evidence: allow 1/2" (1.25 cm) of space on each side
Minimum opening derived from exact product width plus explicit symmetric side spacing: 29.5 + 2 * 0.5 = 30.5 in. Side evidence: allow 1/2" (1.25 cm) of space on each side Calculation or inference: 29.5 + 2 * 0.5.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Minimum opening height derived from highest appliance endpoint 66.189 in plus propagated top clearance 1.5 in. Calculation or inference: max(height_case_in,height_hinge_in) + top_clearance_in.
Why evidence from WRTX5519SZ applies
Target model: ARTX2419SB. Supporting model: WRTX5519SZ. Manufacturer: Amana. Product family and measurement relationship: max(height_case_in,height_hinge_in) + top_clearance_in.
Measurement transferred: Minimum cutout height. Relevant equivalence evidence: Minimum opening height derived from highest appliance endpoint 66.189 in plus propagated top clearance 1.5 in.. Known differences: not separately recorded. Review decision: calculated formula; 2026-09-05.
This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence.
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Minimum opening depth derived from case-only depth 28.375 in plus propagated rear clearance 1.0 in. Calculation or inference: depth_case_only_in + rear_clearance_in.
Why evidence from WRTX5519SZ applies
Target model: ARTX2419SB. Supporting model: WRTX5519SZ. Manufacturer: Amana. Product family and measurement relationship: depth_case_only_in + rear_clearance_in.
Measurement transferred: Minimum cutout depth. Relevant equivalence evidence: Minimum opening depth derived from case-only depth 28.375 in plus propagated rear clearance 1.0 in.. Known differences: not separately recorded. Review decision: calculated formula; 2026-09-05.
This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence.
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern ARTX2419S**
Confidence label: medium.
Primary evidence
Amana measurement source — https://www.amana.com/content/dam/global/documents/202508/dimension-guide-w11656228-reva.pdf Amana · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
1/2" of space on each side Calculation or inference: documented DOE model pattern ARTX2419S**.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern ARTX2419S**
Confidence label: medium.
Primary evidence
Amana measurement source — https://www.amana.com/content/dam/global/documents/202508/dimension-guide-w11656228-reva.pdf Amana · Web source Model scope: Exact model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
1/2" of space on each side Calculation or inference: documented DOE model pattern ARTX2419S**.
Other evidence found
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
1.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Whirlpool WRTX5519SZ
Confidence label: medium.
Primary evidence
Whirlpool WRTX5519SZ Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
Conflict-free corporate-family exact 8-dimension chassis match to Whirlpool WRTX5519SZ; original evidence: Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. To ensure proper ventilation for your refrigerator, allow 1/2" (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1"
Conflict-free corporate-family exact 8-dimension chassis match to Whirlpool WRTX5519SZ; original evidence: Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. To ensure proper ventilation for your refrigerator, allow 1/2" (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" Calculation or inference: exact 8-dimension chassis signature; source model Whirlpool WRTX5519SZ.
Why evidence from WRTX5519SZ applies
Target model: ARTX2419SB. Supporting model: WRTX5519SZ. Manufacturer: Amana. Product family and measurement relationship: exact 8-dimension chassis signature; source model Whirlpool WRTX5519SZ.
Measurement transferred: Top clearance. Relevant equivalence evidence: Conflict-free corporate-family exact 8-dimension chassis match to Whirlpool WRTX5519SZ; original evidence: Whirlpool installation manual explicit clearance: top_clearance_in=1.5 in. To ensure proper ventilation for your refrigerator, allow 1/2" (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1". Known differences: not separately recorded. Review decision: corporate family exact chassis propagation; 2026-09-05.
This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence.
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
1 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.
Original published value and unit: see retained transcription below. Normalization: exact 8-dimension chassis signature; source model Whirlpool WRTX5519SZ
Confidence label: medium.
Primary evidence
Whirlpool WRTX5519SZ Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Equivalent model Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-05
Conflict-free corporate-family exact 8-dimension chassis match to Whirlpool WRTX5519SZ; original evidence: Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your
Conflict-free corporate-family exact 8-dimension chassis match to Whirlpool WRTX5519SZ; original evidence: Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your Calculation or inference: exact 8-dimension chassis signature; source model Whirlpool WRTX5519SZ.
Why evidence from WRTX5519SZ applies
Target model: ARTX2419SB. Supporting model: WRTX5519SZ. Manufacturer: Amana. Product family and measurement relationship: exact 8-dimension chassis signature; source model Whirlpool WRTX5519SZ.
Measurement transferred: Rear clearance. Relevant equivalence evidence: Conflict-free corporate-family exact 8-dimension chassis match to Whirlpool WRTX5519SZ; original evidence: Whirlpool installation manual explicit clearance: rear_clearance_in=1 in. (1.25 cm) of space on each side. Allow 11/2" (3.81 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your. Known differences: not separately recorded. Review decision: corporate family exact chassis propagation; 2026-09-05.
This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence.
No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.
Effect on fit result
This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.
Documented Amana top-mount platform: leave 2" minimum on hinge side next to a fixed wall. Calculation or inference: shared Amana top-mount door-swing architecture.
Why evidence from ARTX3028PB applies
Target model: ARTX2419SB. Supporting model: ARTX3028PB. Manufacturer: Amana. Product family and measurement relationship: shared Amana top-mount door-swing architecture.
Measurement transferred: Hinge-side wall clearance. Relevant equivalence evidence: Documented Amana top-mount platform: leave 2" minimum on hinge side next to a fixed wall.. Known differences: not separately recorded. Review decision: documented amana top mount platform propagation; 2026-09-05.
This is not exact-model documentation. ExactFit applies it only to the measurement above because the retained evidence supports the stated equivalence.
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX2419SB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 1 Reviewed: 2026-09-04
Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.
Confidence label: high.
Primary evidence
Amana ARTX2419SB Dimension Guide assets.skulytics.io · Dimension Guide Model scope: Secondary source Publication/revision date: Not recorded Location: Page 2 Reviewed: 2026-09-04
Model numbers covered: ARTX2419SB. Publication/revision date: Not recorded. Reviewed: 2026-09-04.
8 displayed measurements supported: Overall width; Cabinet height; Height with hinge / controlling height; Depth without door; Depth with handle; Depth with doors open at 90°; Cabinet case width; Adjoining-wall clearance (reviewed endpoint).
Availability: retained review record; original URL retained (current availability not rechecked).
Evidence reflects the sources reviewed on 2026-09-05. Manufacturer specifications can change. Confirm the current exact-model installation document and site-specific conditions before purchase or installation.