Measurement evidence for Amana ARTX2014TW

Value used by ExactFit

27.94 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

28.5-Inch Wide Top-Freezer Refrigerator With A Large Crisper Drawer—14 Cu. Ft. White ARTX2014TW | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: net Width: 27.94 in | on of Home Appliance Manufacturers) Sustainability Standards ### Dimensions Ca
Reviewed: 2026-09-04

net Width: 27.94 in | on of Home Appliance Manufacturers) Sustainability Standards ### Dimensions Cabinet Width 27.938 in Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in

Why this value was used

net Width: 27.94 in | on of Home Appliance Manufacturers) Sustainability Standards ### Dimensions Cabinet Width 27.938 in Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

62.38 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

28.5-Inch Wide Top-Freezer Refrigerator With A Large Crisper Drawer—14 Cu. Ft. White ARTX2014TW | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Cabinet: 62.38 in | pth-Drawer Open 54.688 in Freezer Capacity Volume 3.84 cu. ft.
Reviewed: 2026-09-04

Height To Top Of Cabinet: 62.38 in | pth-Drawer Open 54.688 in Freezer Capacity Volume 3.84 cu. ft. Height 63.125 in Height To Top Of Cabinet 62.375 in Height To Top Of Door Hinge 62.875 in Height To Top Of Door Trim 63.125 in Maxi

Why this value was used

Height To Top Of Cabinet: 62.38 in | pth-Drawer Open 54.688 in Freezer Capacity Volume 3.84 cu. ft. Height 63.125 in Height To Top Of Cabinet 62.375 in Height To Top Of Door Hinge 62.875 in Height To Top Of Door Trim 63.125 in Maxi

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

62.88 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

28.5-Inch Wide Top-Freezer Refrigerator With A Large Crisper Drawer—14 Cu. Ft. White ARTX2014TW | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Height To Top Of Door Hinge: 62.88 in | apacity Volume 3.84 cu. ft. Height 63.125 in Height To Top O
Reviewed: 2026-09-04

Height To Top Of Door Hinge: 62.88 in | apacity Volume 3.84 cu. ft. Height 63.125 in Height To Top Of Cabinet 62.375 in Height To Top Of Door Hinge 62.875 in Height To Top Of Door Trim 63.125 in Maximum Height 63.125 in Minimum Height 62

Why this value was used

Height To Top Of Door Hinge: 62.88 in | apacity Volume 3.84 cu. ft. Height 63.125 in Height To Top Of Cabinet 62.375 in Height To Top Of Door Hinge 62.875 in Height To Top Of Door Trim 63.125 in Maximum Height 63.125 in Minimum Height 62

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

25.19 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

28.5-Inch Wide Top-Freezer Refrigerator With A Large Crisper Drawer—14 Cu. Ft. White ARTX2014TW | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Excluding Doors: 25.19 in | pth Closed Excluding Handles 28.625 in Depth Closed Including Hand
Reviewed: 2026-09-04

Depth Excluding Doors: 25.19 in | pth Closed Excluding Handles 28.625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth With Door Open 90 Degree 54.688 in Depth-Drawer Open 54.688 in Freezer Ca

Why this value was used

Depth Excluding Doors: 25.19 in | pth Closed Excluding Handles 28.625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth With Door Open 90 Degree 54.688 in Depth-Drawer Open 54.688 in Freezer Ca

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

28.62 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

28.5-Inch Wide Top-Freezer Refrigerator With A Large Crisper Drawer—14 Cu. Ft. White ARTX2014TW | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Excluding Handles: 28.62 in | ds ### Dimensions Cabinet Width 27.938 in Capacity 14.3 c
Reviewed: 2026-09-04

Depth Closed Excluding Handles: 28.62 in | ds ### Dimensions Cabinet Width 27.938 in Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth

Why this value was used

Depth Closed Excluding Handles: 28.62 in | ds ### Dimensions Cabinet Width 27.938 in Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth

Other evidence found

• 90 in — superseded

  https://www.shopappliances.com/products/amana-artx2014tw; location not retained. Model scope: not separately recorded. Raw value: depth without handles : Depth with Door Opened at 90 Degrees . The final reviewed registry supersedes this earlier audit value. Depth Closed Excluding Handles: 28.62 in | ds ### Dimensions Cabinet Width 27.938 in Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth

  Open alternative source ↗

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

28.62 in · Fit role: Traffic projection.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

28.5-Inch Wide Top-Freezer Refrigerator With A Large Crisper Drawer—14 Cu. Ft. White ARTX2014TW | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth Closed Including Handles: 28.62 in | Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Exclu
Reviewed: 2026-09-04

Depth Closed Including Handles: 28.62 in | Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth With Door Open 90 Degree 54.688 in Depth-

Why this value was used

Depth Closed Including Handles: 28.62 in | Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth With Door Open 90 Degree 54.688 in Depth-

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is traffic projection. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

54.69 in · Fit role: Operating clearance.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

28.5-Inch Wide Top-Freezer Refrigerator With A Large Crisper Drawer—14 Cu. Ft. White ARTX2014TW | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Depth With Door Open 90: 54.69 in | 625 in Depth Closed Including Handles 28.625 in Depth Excluding
Reviewed: 2026-09-04

Depth With Door Open 90: 54.69 in | 625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth With Door Open 90 Degree 54.688 in Depth-Drawer. Owners Manual

Why this value was used

Depth With Door Open 90: 54.69 in | 625 in Depth Closed Including Handles 28.625 in Depth Excluding Doors 25.188 in Depth With Door Open 90 Degree 54.688 in Depth-Drawer. Owners Manual

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

29 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: 28.0 + 2 * 0.5

Confidence label: medium.

Primary evidence

Amana measurement source — https://www.amana.com/content/dam/global/documents/202605/dimension-guide-w11821756-reva.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 28.0
Reviewed: 2026-09-04

Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 28.0 + 2 * 0.5 = 29.0 in

Why this value was used

Minimum opening from printed cabinet width plus explicit 0.5 in ventilation space on each side: 28.0 + 2 * 0.5 = 29.0 in Calculation or inference: 28.0 + 2 * 0.5.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

64.38 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: max(height_case_in, height_hinge_in) + top_clearance_in

Confidence label: medium.

Calculation inputs: Cabinet height; Height with hinge / controlling height; Top clearance;

Primary evidence

Amana ARTX2014TW Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-05

Installation envelope: max(case 62.38, hinge 62.88) + 1.5 in top = 64.38 in.

Why this value was used

Installation envelope: max(case 62.38, hinge 62.88) + 1.5 in top = 64.38 in. Calculation or inference: max(height_case_in, height_hinge_in) + top_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

26.19 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: depth_case_only_in + rear_clearance_in

Confidence label: medium.

Calculation inputs: Depth without door; Rear clearance;

Primary evidence

Amana ARTX2014TW Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-05

Installation envelope: 25.19 in case depth + 1 in rear = 26.19 in.

Why this value was used

Installation envelope: 25.19 in case depth + 1 in rear = 26.19 in. Calculation or inference: depth_case_only_in + rear_clearance_in.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern ARTX2014T***

Confidence label: high.

Primary evidence

Amana measurement source — https://www.amana.com/content/dam/global/documents/202605/dimension-guide-w11821756-reva.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern ARTX2014T***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

0.5 in · Fit role: Cavity fit. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: documented DOE model pattern ARTX2014T***

Confidence label: high.

Primary evidence

Amana measurement source — https://www.amana.com/content/dam/global/documents/202605/dimension-guide-w11821756-reva.pdf
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

1/2" space on each side

Why this value was used

1/2" space on each side Calculation or inference: documented DOE model pattern ARTX2014T***.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the width comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1.5 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana ARTX2014TW Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-05

Exact ARTX family manual: allow 1 1/2" between overhead cabinets and refrigerator top.

Why this value was used

Exact ARTX family manual: allow 1 1/2" between overhead cabinets and refrigerator top.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the height comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

1 in · Fit role: Cavity fit.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

Amana ARTX2014TW Owners Manual
assets.skulytics.io · Owners Manual
Model scope: Secondary source
Publication/revision date: Not recorded
Location: Page 5
Reviewed: 2026-09-05

Exact ARTX family manual: allow at least 1" between back of cabinet and wall.

Why this value was used

Exact ARTX family manual: allow at least 1" between back of cabinet and wall.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This measurement supports the depth comparison. An applicable cutout can replace additive clearances. If a required input is unknown and no applicable alternative requirement is established, the result is Uncertain unless another known requirement proves Does not fit.

Value used by ExactFit

2 in · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: shared Amana top-mount door-swing architecture

Confidence label: medium.

Primary evidence

Amana ARTX3028PB Dimension Guide
assets.skulytics.io · Dimension Guide
Model scope: Equivalent model
Publication/revision date: Not recorded
Location: Page 2
Reviewed: 2026-09-05

Documented Amana top-mount platform: leave 2" minimum on hinge side next to a fixed wall.

Why this value was used

Documented Amana top-mount platform: leave 2" minimum on hinge side next to a fixed wall. Calculation or inference: shared Amana top-mount door-swing architecture.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

27.94 in · Fit role: Informational only.

Original published value and unit: see retained transcription below. Normalization: No separate conversion rule recorded; the stored normalized value is retained without additional rounding.

Confidence label: high.

Primary evidence

28.5-Inch Wide Top-Freezer Refrigerator With A Large Crisper Drawer—14 Cu. Ft. White ARTX2014TW | Amana
Amana · Web source
Model scope: Exact model
Publication/revision date: Not recorded
Location: Retained specification excerpt: Cabinet Width: 27.94 in | iation of Home Appliance Manufacturers) Sustainability Standards ### Dimen
Reviewed: 2026-09-04

Cabinet Width: 27.94 in | iation of Home Appliance Manufacturers) Sustainability Standards ### Dimensions Cabinet Width 27.938 in Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in

Why this value was used

Cabinet Width: 27.94 in | iation of Home Appliance Manufacturers) Sustainability Standards ### Dimensions Cabinet Width 27.938 in Capacity 14.3 cu. ft. Depth 28.625 in Depth Closed Excluding Handles 28.625 in

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is informational only. It is shown for a separate on-site check and does not establish cavity fit or delivery access.

Value used by ExactFit

Unknown · Fit role: Operating clearance. Calculated or inferred value — not a directly printed measurement.

Original published value and unit: see retained transcription below. Normalization: Popular-brand chassis/type consensus: Whirlpool-platform freestanding family installation clearance

Confidence label: low.

Primary evidence

Amana measurement source — local-cache manufacturer-family consensus
assets.skulytics.io · Web source
Model scope: Not established
Publication/revision date: Not recorded
Location: Retained specification excerpt: Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification patt
Reviewed: 2026-09-04

Inferred 0.5 in per-side installation clearance from dominant manufacturer-family specification pattern.

Why this value was used

A low-confidence, consensus, or unspecified-minimum assumption does not establish a safe fit requirement.

Retained research value: 0.5 in. It is preserved for audit but not accepted as a safe fit input.

Other evidence found

No materially different value is retained in the linked per-measurement audit records. This does not imply that every published source was searched.

Effect on fit result

This is operating clearance. It is shown for a separate on-site check and does not establish cavity fit or delivery access.